Megan Ver. 2 Journal

Megan370z

First day of welding and its half way completed. About 80% of the cage is/will be TIG welded.

Only 5 bars needs to be cut and fitted. The cage fit quite nicely exactly back where it was suppose to be. Which mean the welding did not affected the cage by twisting it. I guess I did a good job so far!!!

Attached Images

	10896194_588213747979399_3695246418631316325_o.jpg (236.8 KB, 75 views)
	10899980_588218921312215_4764398892434237644_o.jpg (236.9 KB, 56 views)
	10904012_588252047975569_8787516199594470417_o.jpg (218.2 KB, 58 views)

__________________
Megan Journal *Click Me* ....................One Man Team Motorsport *Click Me*

ENT-Z

No way could I ever do anything like this myself, but one question: isn't the gap between the roof and cage excessive?

Megan370z

heheh yes it would be excessive if it was indeed like that.

No, I dropped the cage down and forward as much as possible to permit doing the weld required on the top of it due to a 360degrees weld mandatory.

__________________
Megan Journal *Click Me* ....................One Man Team Motorsport *Click Me*

ENT-Z

Ok cool so this is an in progress pic not the final position! I was freaking out a little for your safety there for a sec!

Megan370z

yeah I got a couple comments about the same picture.

The cage should be finish in the next couple days.
Every mounting plates/boxes has been welded today and the cage welded to them which wasn't as bad as I thought due to not having a lot of space to weld around the base.

The cage did twisted about half an inch today before I realized it and I quickly corrected the situation its pretty even on both side now.

hopefully I can finish the welding on the cage and finish with the rest of the reinforcement tubing.

__________________
Megan Journal *Click Me* ....................One Man Team Motorsport *Click Me*