my Drift build

[igotaracecar]

hello everyone im a new member here so if i post this in the wrong section i am sorry. figured i would post my build up being i don't see many 370z drift cars

[igotaracecar]

the day i got the car. 09 370z with 25k stock as a rock

[igotaracecar]

i knew from the start i wanted to make this my comp car so i did not get one that was fully loaded. i drove it like this over the summer and when winter rolled around thats when tear down started

[igotaracecar]

first 2 things i knew i had to cover is the yaw sensor and abs i went ahead and wired in switches so i can cut power to the yaw sensor and abs unit whenever i wanted to. next i went ahead and dropped out the rear end and trans i ended up putting in a south bend 6 puck clutch and the z speed slave and new oem master. and for the rear end i went with a kaaz 2.0 way diff and a nice z1 diff cover unfortunately i never took pics of the clutch install

[igotaracecar]

after fighting with the SPL solid diff bushings i finally got the diff back in next i ran the lines for the ASD stand alone hydro with the help of maverick motorsports so i can mount dual rear calipers after i fitted the hydro were i liked it i went and rewired the car and took out some more interior panels little by little along with the sound deadning

[Austonian]

crazy stuff man, what are your future plans?

[igotaracecar]

next came the suspension i went with bc coilovers and z1 upper control arms and kentic rear camber and toe arms

Sent from my SM-G920P using Tapatalk

[igotaracecar]

just some more pics of the build twm short shifter and tomei exhaust with z1 test pipes

Sent from my SM-G920P using Tapatalk

[igotaracecar]

after some test and tunes i did not like how the hydro was but lucky me i am a fabricator at one of the best hotrod shops around so i made my own handle

Sent from my SM-G920P using Tapatalk

[igotaracecar]

seat is in for a test fit. once i get everything how i want it then i will start to build the cage around what i want. its better to make the cage around you then to make the cage first and then try to adapt to somthing that you dont feel comfortable in...if that makes sense haha

Sent from my SM-G920P using Tapatalk

[igotaracecar]

i found that building a car like this brings out all types of people some that love it and some that think you are an idiot for "destroying" a perfectly good car. i am building this car for me. i always wanted a nice slide car that looks badass and is just an overall fun car i don't care how much money im dumping in to it and how much money im going to lose. don't let others build your car...on that note...say bye bye to the ac, blower motor and heater core.

Sent from my SM-G920P using Tapatalk

[MagmaRed370z]

Awesome. Great job. Looking forward for some videos too!

[Rusty]

Welcome to the forum. Looking forward toward your progress.

[igotaracecar]

thanks guys i will keep updating as i go

Sent from my SM-G920P using Tapatalk

[igotaracecar]

https://vimeo.com/163969160 well we had a cook out at work on Friday so i decided to take out the z to have a little fun found out i could not do a standing burn out and was pretty upset. found out our cars have a safety feature where if you press both the gas and break then it dies down the car. so i went and decided to take care of that problem and wired in a switch with a inline fuse for the brake lamp now i can do standing burnouts all day!! haha this is a clip from last night having a little fun in the parking lot at work. sorry for my video quality

Sent from my SM-G920P using Tapatalk