Remote start

av370 · 07-19-2009, 02:38 AM

Anybody have one of these installed yet, seems easy enough with the push button and auto.

bigaudiofanat · 07-19-2009, 09:10 AM

LOL my friend if only you knew. You have so much going on that I think that it will be a while before it is even possible to do. You see your transponder is what tells the engine and the system it is okay to start. This controls everything so without that the car will not start. So in older cars were the chip was inside the key you needed a tanspnder that held the key inside a box under the dash and tricked the car into thinking it was oka to start. The problem with your transponder is if that is in the car weather it be inside that bax or in our pocket. Not only can you start the car but drive away with it as well and unlock the doors to. So If you did a remote start and you hit the start button on your keyless remote. Someone could literaly walk up hit the button to unlock thhe car get in and drive off. I just think it will be a while before anyone dose one in this car. PLay it safe and wait.

Cjanik · 07-19-2009, 09:19 AM

The thing about the remote starts, is when you hit the brake, then the transponder ghosting unit shuts off and your key will have to be present to take over and keep the engine running.

so whoever gets into your car will not go far.

bigaudiofanat · 07-19-2009, 09:47 AM

That original ranspnder is inside the car and the car will see it even after it is disengaged and the car will sill use that trans to operate. I eman the car can read the transponder inide a leather cas inside a pocket or in a backpack, I am sure it can read it inside a peice of plastic.

bigaudiofanat · 07-19-2009, 10:19 AM

Just found this
"i dont have remote start on my z but i do have it one my 03 dodge ram. only thing it messed with was the factory keyless the keyless feature is now tied in with the remote start, if i dont remote start it i have to unlock it with the oem remote, if i do remote start it i have to use the keyless on the remote start keyfob. my sister has it on her 05 scion tc she had problems with it because of the immobilizer so she doesnt use it to much anymore. its a nice thing to be able to get into a warm or cool car yes, but i wouldnt put one on my z, no"
That to me is enough to not want to install one

Came from here Alarm/remote start?: 350Z / 370Z Forum: Nissan Forums / Infiniti Forums - NICOclub

marcussoori · 07-19-2009, 10:30 AM

What about the factory JDM remote start system for the 370Z that is being sold on:

japanparts.com : PARTS DATABASE

Will this work with our US 370Zs?

nogoodname · 07-19-2009, 10:38 AM

i got the viper system in my G and they said they can add the remote start whenever i want.

hope it wont be messed up.

marcussoori · 08-26-2009, 02:07 PM

Bump: any updates?

CrownR426 · 08-26-2009, 02:08 PM

There was already a thread about this.

jordan33165 · 08-29-2009, 12:57 AM

i tried getting one installed they had mycar for 5hrs then they told me it cant be done yet cuz there arent any manuels for install

Pharmacist · 08-29-2009, 08:45 PM

Why remote start? Can anyone give me a logical answer as to why people are so eager to start the car from far away? What purpose does it serve?

marcussoori · 09-15-2009, 04:24 PM

See the reply I got below...not very promising. Anyone interested in being the first guinea pig?

"Dear Sir/ Madam

Thank you so much for your e-mail. My name is Tsuyoshi from Japanparts.com. About 415-014-020-1, it is for A/T, so this is okay for the transmission type. However, all of our parts are basically for JDM, so I can not guarantee that this will fit to USDM.

Also, the installation directions in English are not available and not able to check the signals, so I can not tell that this sound is same as the US signals.

I am sorry for the inconvenience.

japanparts.com : PARTS DATABASE

Just in case you do NOT know how, here is the way to checkout including the shipping fee and how to make an order, so please check it:

Step 1:
Please go to the link that I attached before. Please click convert to change the value to your hope currency and click refresh.
Step 2:
Please click more info to make sure that is the right parts that you want.
Step 3:
Please choose the select one and select 2 if necessary and put QTY.
Step 4:
Please click the shopping cart.
Step 5:
If you want to add some more parts, then please click back to item list and go back from Step 2. If you are NOT adding any other parts, then please skip this
PLEASE NOTE: Our Site requires "Cookies" to be enabled. Please adjust your Web browser.
Step 6:
Please choose your area and click Select Your Area.
Step 7:
Please fill out "Delivery Charge Quote" and "Payment Method" and click Submit. PLEASE CHOOSE NEAREST AIRPORT AND SEAPORT IF THE PART(S) IS BIG.
Step 8:
Please choose Freight method and click Proceed with an Order if the parts price and shipping fee are OK with you.
Step 9:
Please read on to PLEASE READ first.
Step 10:
Please fill out 'Consignee's Information', Buyer Information' and 'The Password for a Point Check' and Process an order.
Make sure to input your password after inputting your e-mail address.
Please make the password if this is the first order.
Step 11:
Please put the points that you want to use (If you already have the discount points with us) and click Process with an order. If you are shopping with us for first time, then please do NOT worry about now.

PLEASE NOTE, IMPORTING TAX OR SOMETHING LIKE THOSE PRICE DOES NOT INCLUDE. You may have to pay, but I do NOT know how much it will be.

PLEASE NOTE, ALL OUR PARTS ARE FOR JDM, SO I CAN NOT GUARANTEE ANY OF THE PARTS WILL WORK OK ONTO EXPORTING AND OVER SEA MODEL OR NOT. THAT MEANS, I CAN NOT ACCEPT ANY PARTS RETURNING OR ANYTHING LIKE THAT EVEN THE PARTS DOES NOT WORK ONTO YOUR CAR. If you are happy with it, then please make an order.

If you have any questions, please reply to me.

Yours faithfully

Tsuyoshi
Japanparts.com"

vipor · 09-23-2009, 04:37 PM

Quote:

Originally Posted by Pharmacist

Why remote start? Can anyone give me a logical answer as to why people are so eager to start the car from far away? What purpose does it serve?

Remote start would allow your car to warm up (or cool down) before going to it. They are most useful on diesel engines on cold days so the glow plugs have time to warm and the vehicle can be ready for real driving right off the bat. This can also be good to guarantee that oil and tranny fluid is warmed and moving (in the top of the motor) before getting on the throttle to limit pinging and such.

Another huge benefit I can see for the Z car is on icy days to get the car warmed up and the windows defrosting before opening the doors. I'm sure that at least once an issue has come from the self venting windows opperating with ice on them.

If a DEI 555 style keyfob replicator is released that will link the transponder signal into the port on the lower-left side of the dash then I don't forsee any issues. I wouldn't be happy with the "hide-a-key" method that used to be prevalent with Fords and Toyotas.

Also thanks to the fact that the car knows exactly which gear you're in you could use diodes to make sure that the E-Brake was on and the car is in Neutral before attempting to start. Partner that with a pre-ignition relay to bypass the clutch pinswitch and you're golden. On my 240 I actually just disassembled the lower clutch switch and made a jumper to bypass the thing all-together. I did keep the upper switch though, so the cruise control would still drop out when depressing the pedal.

vipor · 09-24-2009, 12:36 AM

I was just doing some looking around, looks like there's an interface module out already. It interfaces with the OBDII port, I remember starting to see some like this back in the day when I was still installing.

Programmable Platform#07:CAN Bus High Speed Interface
XpressKit.com - Compatibility Chart

Looks like I'll be installing one of these in the next couple months, should be a fun refresher

Might go with the new Clifford Matrix 50.7X or Viper 5901, can't remember which I have access too.

vipor · 09-24-2009, 12:50 AM

Just found this wonderful tidbit as well... DEI_2009_Nissan_370Z.pdf

07-19-2009, 02:38 AM	#1 (permalink)
av370 Base Member Join Date: Jul 2009 Location: antelope valley CA Posts: 70 Drives: 09 370Z Rep Power: 263	Remote start Anybody have one of these installed yet, seems easy enough with the push button and auto.

07-19-2009, 09:10 AM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	LOL my friend if only you knew. You have so much going on that I think that it will be a while before it is even possible to do. You see your transponder is what tells the engine and the system it is okay to start. This controls everything so without that the car will not start. So in older cars were the chip was inside the key you needed a tanspnder that held the key inside a box under the dash and tricked the car into thinking it was oka to start. The problem with your transponder is if that is in the car weather it be inside that bax or in our pocket. Not only can you start the car but drive away with it as well and unlock the doors to. So If you did a remote start and you hit the start button on your keyless remote. Someone could literaly walk up hit the button to unlock thhe car get in and drive off. I just think it will be a while before anyone dose one in this car. PLay it safe and wait. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

07-19-2009, 09:47 AM	#4 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	That original ranspnder is inside the car and the car will see it even after it is disengaged and the car will sill use that trans to operate. I eman the car can read the transponder inide a leather cas inside a pocket or in a backpack, I am sure it can read it inside a peice of plastic. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

07-19-2009, 10:19 AM	#5 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Just found this "i dont have remote start on my z but i do have it one my 03 dodge ram. only thing it messed with was the factory keyless the keyless feature is now tied in with the remote start, if i dont remote start it i have to unlock it with the oem remote, if i do remote start it i have to use the keyless on the remote start keyfob. my sister has it on her 05 scion tc she had problems with it because of the immobilizer so she doesnt use it to much anymore. its a nice thing to be able to get into a warm or cool car yes, but i wouldnt put one on my z, no" That to me is enough to not want to install one Came from here Alarm/remote start?: 350Z / 370Z Forum: Nissan Forums / Infiniti Forums - NICOclub __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

08-26-2009, 02:08 PM	#9 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 847	There was already a thread about this. __________________ Love + Hardwork + Passion RIP SVTRacer

07-19-2009, 09:19 AM	#3 (permalink)
Cjanik Track Member Join Date: May 2009 Location: Las Vegas Posts: 578 Drives: N/A Rep Power: 16	The thing about the remote starts, is when you hit the brake, then the transponder ghosting unit shuts off and your key will have to be present to take over and keep the engine running. so whoever gets into your car will not go far.

07-19-2009, 10:30 AM	#6 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 16	What about the factory JDM remote start system for the 370Z that is being sold on: japanparts.com : PARTS DATABASE Will this work with our US 370Zs?

07-19-2009, 10:38 AM	#7 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	i got the viper system in my G and they said they can add the remote start whenever i want. hope it wont be messed up.

08-26-2009, 02:07 PM	#8 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 16	Bump: any updates?

08-29-2009, 12:57 AM	#10 (permalink)
jordan33165 Base Member Join Date: Jun 2009 Location: miami Posts: 55 Drives: nissan 370z Rep Power: 15	i tried getting one installed they had mycar for 5hrs then they told me it cant be done yet cuz there arent any manuels for install

08-29-2009, 08:45 PM	#11 (permalink)
Pharmacist A True Z Fanatic Join Date: May 2009 Location: Toronto, Ontario Posts: 1,249 Drives: 09 370z Sport 6MT Rep Power: 17	Why remote start? Can anyone give me a logical answer as to why people are so eager to start the car from far away? What purpose does it serve?

09-15-2009, 04:24 PM	#12 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 16	See the reply I got below...not very promising. Anyone interested in being the first guinea pig? "Dear Sir/ Madam Thank you so much for your e-mail. My name is Tsuyoshi from Japanparts.com. About 415-014-020-1, it is for A/T, so this is okay for the transmission type. However, all of our parts are basically for JDM, so I can not guarantee that this will fit to USDM. Also, the installation directions in English are not available and not able to check the signals, so I can not tell that this sound is same as the US signals. I am sorry for the inconvenience. japanparts.com : PARTS DATABASE Just in case you do NOT know how, here is the way to checkout including the shipping fee and how to make an order, so please check it: Step 1: Please go to the link that I attached before. Please click convert to change the value to your hope currency and click refresh. Step 2: Please click more info to make sure that is the right parts that you want. Step 3: Please choose the select one and select 2 if necessary and put QTY. Step 4: Please click the shopping cart. Step 5: If you want to add some more parts, then please click back to item list and go back from Step 2. If you are NOT adding any other parts, then please skip this PLEASE NOTE: Our Site requires "Cookies" to be enabled. Please adjust your Web browser. Step 6: Please choose your area and click Select Your Area. Step 7: Please fill out "Delivery Charge Quote" and "Payment Method" and click Submit. PLEASE CHOOSE NEAREST AIRPORT AND SEAPORT IF THE PART(S) IS BIG. Step 8: Please choose Freight method and click Proceed with an Order if the parts price and shipping fee are OK with you. Step 9: Please read on to PLEASE READ first. Step 10: Please fill out 'Consignee's Information', Buyer Information' and 'The Password for a Point Check' and Process an order. Make sure to input your password after inputting your e-mail address. Please make the password if this is the first order. Step 11: Please put the points that you want to use (If you already have the discount points with us) and click Process with an order. If you are shopping with us for first time, then please do NOT worry about now. PLEASE NOTE, IMPORTING TAX OR SOMETHING LIKE THOSE PRICE DOES NOT INCLUDE. You may have to pay, but I do NOT know how much it will be. PLEASE NOTE, ALL OUR PARTS ARE FOR JDM, SO I CAN NOT GUARANTEE ANY OF THE PARTS WILL WORK OK ONTO EXPORTING AND OVER SEA MODEL OR NOT. THAT MEANS, I CAN NOT ACCEPT ANY PARTS RETURNING OR ANYTHING LIKE THAT EVEN THE PARTS DOES NOT WORK ONTO YOUR CAR. If you are happy with it, then please make an order. If you have any questions, please reply to me. Yours faithfully Tsuyoshi Japanparts.com"

09-24-2009, 12:36 AM	#14 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	I was just doing some looking around, looks like there's an interface module out already. It interfaces with the OBDII port, I remember starting to see some like this back in the day when I was still installing. Programmable Platform#07:CAN Bus High Speed Interface XpressKit.com - Compatibility Chart Looks like I'll be installing one of these in the next couple months, should be a fun refresher Might go with the new Clifford Matrix 50.7X or Viper 5901, can't remember which I have access too. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

09-24-2009, 12:50 AM	#15 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	Just found this wonderful tidbit as well... DEI_2009_Nissan_370Z.pdf __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
remote start ?	Wicked Nestor	Nissan 370Z General Discussions	27	04-28-2011 04:25 PM
Remote start	cwj370	Nissan 370Z General Discussions	24	09-15-2009 07:16 PM
Car wont start	faijia	Nissan 370Z General Discussions	4	06-14-2009 11:37 PM
Is synchro rev on by default when you start the car?	psteng19	Nissan 370Z General Discussions	4	02-05-2009 10:17 AM
When you start your Nissan 370Z,	AK370Z	Nissan 370Z General Discussions	18	12-25-2008 04:52 AM