Custom ported and CNC throttle bodies, upper and lower manifolds by Synergy Composite

synolimit · 11-22-2014, 03:42 PM

And so far we found why the last dyno was so low and the car made no HP with the porting...the cars knocking and is in a lower "safe" map. For whatever reason target AFR was 12.8 but running 13.5 with a lot more timing then he normally runs. We are adding fuel and having another run.

370Z JT · 11-22-2014, 03:45 PM

good luck!

synolimit · 11-22-2014, 03:57 PM

That torque!!! And yes! It's is SAE! We are not cheating with STD here.

synolimit · 11-22-2014, 04:05 PM

synolimit · 11-22-2014, 04:34 PM

Picked up 14hp and 10tq at the end. Not bad for just a retune showing tuner vs tuner. Cars not knocking and its allowing to pull the whole way. I'm thinking yearly checkups from here on out though and E85 to come!!

synolimit · 11-22-2014, 04:36 PM

Fyi, STD that everyone else shows

370Z JT · 11-22-2014, 04:37 PM

impressive gains. Have you been on this dyno before to compare numbers?

synolimit · 11-22-2014, 04:53 PM

Quote:

Originally Posted by 370Z JT

impressive gains. Have you been on this dyno before to compare numbers?

No, I showed up, ran, tune, ran again till it was done. IPS dyno I do have 3 different times on it and it showed almost the same numbers a month ago on the old tune as this first pull. They showed 302/246. This base was 298/250 so good for dynojet being consistent.

Masterbeatty · 11-23-2014, 05:00 PM

Nice dude! Car sounds sweet too.

carlitos_370z · 11-24-2014, 06:19 AM

great my friend and well done

V8Killer · 11-24-2014, 10:44 AM

Hey Scott,

I couldn't remember but was this with the TB's and Lower ported?

synolimit · 11-24-2014, 11:52 AM

Yes

FPenvy · 11-24-2014, 12:04 PM

Quote:

Originally Posted by synolimit

Yes

so whats the cost vs power gain equation for this setup?

synolimit · 11-24-2014, 12:28 PM

Quote:

Originally Posted by FPenvy

so whats the cost vs power gain equation for this setup?

Quote:

Originally Posted by synolimit

So I've decided to pay for a locals uprev license to get this moving along (cheaper than you think

). We will be tuning his G37 as is right now with CAI, HFC and CBE. I will then be adding my parts, do a base run to see what they do alone, and tune again. So all of you that have been waiting, wait no longer.

As I thought talking with the tuner these parts WILL show the greatest gains for FI guys! So if 500hp isn't enough then come see me. The tune is setup for November 30th at 3pm at Covert Tuning in Columbus, which by the way, nice cars! Currently 4 TT Lambos sitting around with 100% CNC custom manifolds with integrated BOV's, 4" intake pipes, CNC exhausts, headers etc etc.

Stay tuned.

https://www.facebook.com/CovertTuningDynamics

Quote:

Originally Posted by synolimit

this is not the dyno going down on the 30th but today is the day im going back to see the tunes safety!!!! again wish me luck!!

.

FPenvy · 11-24-2014, 12:32 PM

what does a lambo engine pic have to do with a price question......

are you saying it costs that much? on that note i'm good.

11-22-2014, 03:42 PM	#376 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	And so far we found why the last dyno was so low and the car made no HP with the porting...the cars knocking and is in a lower "safe" map. For whatever reason target AFR was 12.8 but running 13.5 with a lot more timing then he normally runs. We are adding fuel and having another run. __________________ 13 370z-

11-22-2014, 03:45 PM	#377 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	good luck! __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

11-22-2014, 04:05 PM	#379 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	carlitos_370z likes this. __________________ 13 370z- Last edited by Trips; 11-23-2014 at 05:02 PM.

11-22-2014, 04:37 PM	#382 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	impressive gains. Have you been on this dyno before to compare numbers? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

11-23-2014, 05:00 PM	#384 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122866	Nice dude! Car sounds sweet too. synolimit likes this. __________________ 2011 MB 6MT Masterbeatty journal

11-24-2014, 06:19 AM	#385 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	great my friend and well done

11-24-2014, 10:44 AM	#386 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Hey Scott, I couldn't remember but was this with the TB's and Lower ported? __________________ "Punch" Too much to list and a baby shot of nitrous....

11-24-2014, 11:52 AM	#387 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Yes __________________ 13 370z-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom ported and CNC throttle bodies, upper and lower manifolds	synolimit	Exhaust/Intake	297	06-25-2021 09:13 AM
[WTB] Lower intake manifolds! Uppers and TB's welcome!!	synolimit	Parts for sale (Private Classifieds)	0	11-19-2014 02:02 AM
Smokeys dyno, ported TB's, manifolds etc	synolimit	Tuning	8	08-15-2014 11:11 AM
can the throttle bodies be taken off?	boomboom	Engine & Drivetrain	9	11-03-2013 01:46 PM
Kinetix 370Z/G37 Velocity Upper Intake Manifolds - Z1 Motorsports	Dustin@Z1	Intake/Exhaust	151	03-18-2013 09:37 AM