Custom ported and CNC throttle bodies, upper and lower manifolds by Synergy Composite

synolimit · 10-06-2014, 03:59 PM

Quote:

Originally Posted by FPenvy

thought for a 50-100 run everyone was hovering at 50 THEN gas. if i went balls out to 50and started a run then i'd be at 100 in about 4 seconds or so lol

looks like maybe i'll finally have someone ride along and film mine.

As stated very clearly in the instructions you do it any way possible to get the fastest time. Every single car I showed both stock and modified were done my way or 1/4 mile times. That means balls to the wall blowing by 50. All 4 times we have on this page are also clearly done this way in the videos they posted. I believe though Megan is so slow because he rounded that corner in 3rd and clearly 2nd to 3rd is the fastest and on these cars you have to have rise the rev limiter like I have so you don't switch into 4th.

FPenvy · 10-07-2014, 07:37 AM

Quote:

Originally Posted by synolimit

As stated very clearly in the instructions you do it any way possible to get the fastest time. Every single car I showed both stock and modified were done my way or 1/4 mile times. That means balls to the wall blowing by 50. All 4 times we have on this page are also clearly done this way in the videos they posted. I believe though Megan is so slow because he rounded that corner in 3rd and clearly 2nd to 3rd is the fastest and on these cars you have to have rise the rev limiter like I have so you don't switch into 4th.

well my 1/4 is 12.89 @ 111mph i think my 50-100 will be pretty good then lol

pretty sure i can pull 50-100 in 4-5 seconds honestly. i'll have to test this theroy this weekend since it's rain for the next few days it seems.

synolimit · 10-07-2014, 07:44 AM

Quote:

Originally Posted by FPenvy

well my 1/4 is 12.89 @ 111mph i think my 50-100 will be pretty good then lol

pretty sure i can pull 50-100 in 4-5 seconds honestly. i'll have to test this theroy this weekend since it's rain for the next few days it seems.

What do you have done? Cause those are turbo times as shown by phunk and firehawk.

370z 50-100mph tread. Everyone post.

FPenvy · 10-07-2014, 07:54 AM

Quote:

Originally Posted by synolimit

What do you have done? Cause those are turbo times as shown by phunk and firehawk.

370z 50-100mph tread. Everyone post.

i've read the posts my friend and i know their times.

i'll do some filming once the area and weather dries out later this week/weekend

sadly my tires are getting worn since it is almost time for the Z's yearly hibernation but still will give it hell.

and read the sig. you should know what i have done by now.

ANMVQ · 10-07-2014, 07:40 AM

OK cause everyone skip me LOL I'm guessing the 50-100 run is in 5th? I wanna test this also. :/

synolimit · 10-07-2014, 07:47 AM

Quote:

Originally Posted by ANMVQ

OK cause everyone skip me LOL I'm guessing the 50-100 run is in 5th? I wanna test this also. :/

I didn't miss you. Lol 5th would be 30 seconds.

Quote:

Originally Posted by synolimit

2nd and redline 3rd.

synolimit · 10-17-2014, 07:56 AM

V8killa, your orders ready

V8Killer · 10-19-2014, 02:17 AM

Walked in my room pulled up the site and did the happy dance with my kit on LOL

synolimit · 10-19-2014, 03:34 AM

Hope you enjoy. You've got me thinking about the upper now. Talking to porter now. Maybe we can do all 3 from now on and maybe we'll get some real numbers soon. My porter can at least flow bench test to see how air we are getting now! Forced induction guys should be all over this!

V8Killer · 10-20-2014, 02:31 AM

Let me know if he still has them so that way I can ship my upper and the TB's, girlfriend said they have already arrived. IS he going to port match the upper?

synolimit · 10-20-2014, 03:50 AM

Quote:

Originally Posted by V8Killer

Let me know if he still has them so that way I can ship my upper and the TB's, girlfriend said they have already arrived. IS he going to port match the upper?

Will do. He will if he gives me the go ahead. I'll call Monday.

synolimit · 10-23-2014, 05:11 AM

added the upper intake manifold back in to the FS thread!!

soon to have bench flow testing done!

http://www.the370z.com/parts-sale-pr...-manifold.html

V8Killer · 10-24-2014, 02:16 AM

I should have the parts off the car this weekend. Once that happens I will have them shipped during the week, then we get to see how it all goes.

synolimit · 10-24-2014, 04:18 AM

Sounds good!

synolimit · 10-31-2014, 12:40 PM

Woohoo a dyno finally. He even went from STD to SAE and made more power with a retune and TB's.

Quote:

Originally Posted by OneSickBlackG

RESULTS! I will recommend these!

Dyno: Dynojet

Dyno video: G37s Dyno - YouTube

Dyno graph: AT BOTTOM

Car: 08' G37s 6MT

The Throttle Bodies were the last mod that I have done. Prior to the new throttle bodies my numbers:
304.87 HP
256.86 TQ
STD
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune.

Numbers after the new TB's and retune:
317.92 HP
269.98 TQ
SAE
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune, 63mm ported TB's.

10-07-2014, 07:40 AM	#5 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 21	OK cause everyone skip me LOL I'm guessing the 50-100 run is in 5th? I wanna test this also. :/ __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-17-2014, 07:56 AM	#7 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3391	V8killa, your orders ready V8Killer likes this. __________________ 13 370z-

10-19-2014, 02:17 AM	#8 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 18	Walked in my room pulled up the site and did the happy dance with my kit on LOL synolimit likes this. __________________ "Punch" Too much to list and a baby shot of nitrous....

10-19-2014, 03:34 AM	#9 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3391	Hope you enjoy. You've got me thinking about the upper now. Talking to porter now. Maybe we can do all 3 from now on and maybe we'll get some real numbers soon. My porter can at least flow bench test to see how air we are getting now! Forced induction guys should be all over this! __________________ 13 370z-

10-20-2014, 02:31 AM	#10 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 18	Let me know if he still has them so that way I can ship my upper and the TB's, girlfriend said they have already arrived. IS he going to port match the upper? __________________ "Punch" Too much to list and a baby shot of nitrous....

10-23-2014, 05:11 AM	#12 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3391	added the upper intake manifold back in to the FS thread!! soon to have bench flow testing done! http://www.the370z.com/parts-sale-pr...-manifold.html Jordo! and megalapagas like this. __________________ 13 370z- Last edited by synolimit; 10-23-2014 at 05:14 AM.

10-24-2014, 02:16 AM	#13 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 18	I should have the parts off the car this weekend. Once that happens I will have them shipped during the week, then we get to see how it all goes. __________________ "Punch" Too much to list and a baby shot of nitrous....

10-24-2014, 04:18 AM	#14 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3391	Sounds good! __________________ 13 370z-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom ported and CNC throttle bodies, upper and lower manifolds	synolimit	Exhaust/Intake	297	06-25-2021 09:13 AM
[WTB] Lower intake manifolds! Uppers and TB's welcome!!	synolimit	Parts for sale (Private Classifieds)	0	11-19-2014 02:02 AM
Smokeys dyno, ported TB's, manifolds etc	synolimit	Tuning	8	08-15-2014 11:11 AM
can the throttle bodies be taken off?	boomboom	Engine & Drivetrain	9	11-03-2013 01:46 PM
Kinetix 370Z/G37 Velocity Upper Intake Manifolds - Z1 Motorsports	Dustin@Z1	Intake/Exhaust	151	03-18-2013 09:37 AM