Another DIY Twin Turbo kit (COMP oil-less turbos)

gbrettin

Did someone finally come out with a flex fuel sensor for our Z?

jwick

Not that I know of. But if you were savvy enough you could tune each individual map for different levels of octane, measure it when getting gas and just switch to the appropriate map. Take a lot of road tuning, or easy access to a dyno, to do but could be done.

Edit - sounds like the OP has something specific in mind so maybe he can educate us

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

nvgtr35

Hows your kit holding up? any issues with your setup?

nvgtr35

I was thinking of doing a similar setup.

thangcu35

I've put over 1500 miles on it and the only issue is lack of traction lol. Not a single oil leak, well the turbos never needed any to begin with . My oil temp never gets above 220 after doing prolonged pulls and usually hovers 210 in stop and go traffic. I will get an oil cooler installed before summer, but it's suffice for now. I've checked the exhaust downpipes and no crack anywhere. I've been recently stressed out from buying a house, so hasn't been doing much tuning and updating the car. Once I move in the new house, I may sell a kidney to buy a dynojet and car lift

TerribleONE

Not yet but Ecutec is working on it.

__________________