Forced Induction Finished Builds

Z&I · 12-09-2015, 01:49 PM

Quote:

Originally Posted by tonyHTX

The actuators would need to change to be able to get more PSI. But because of the cramped spaces the motor would have to be dropped to change the actuators out. Because of the this, *IF* that ever happens I'm sure the turbos would probably be changed as well.

The motor is built with 10:1 compression. I always thought that torque starts to fall off when HP takes over - is this not true?

Yes this I have the AAM kit with the EFR6758s in their default configuration.

Thanks for your reply...
Yes ... torque falls off [affecting the rate of acceleration] when HP takes over.
Just realized that you have a G35 ... different motor than the 370.

I have been down to AAM to 'visit' my car ... and there is no room to fiddle around in that cramped motor compartment at all!
They would have to pull the motor to do any work on the Turbos.
I did speak with them and they are aware of my concerns regarding the/my need for power up top since I do plan to run the 1/4 with it.
I am running 9.5:1 CR with 1300 Injectors so I'll be needing a lot of air to keep up.
The stock Turbo's are in the car and we are waiting on a few more parts to come in before the Dyno Day arrives to see how it all works together before finalizing the decision to change the Turbos.
Probably will speak with them again regarding all this beforehand to see what is involved cost wise to do this.
In the meantime I will still be fishing for more info!
Thanks,

Z&I · 12-09-2015, 01:54 PM

Quote:

Originally Posted by dragonbreath

Good to know. Ill be shooting for 700whp and want to make sure that I won't be choked out right under 700 lol. The turbo upgrade for the AAM kit def isn't cheap. Im still on the fence about it, but I'm leaning towards no upgrade and just maxing out the regular turbos.

I'm in the same situation ... what price did they give you for the upgrade?
When the car was shipped down there they didn't have that option - or they just didn't mention it to me.
Thanks,

jwick · 12-09-2015, 02:38 PM

Quote:

Originally Posted by dragonbreath

Good to know. Ill be shooting for 700whp and want to make sure that I won't be choked out right under 700 lol. The turbo upgrade for the AAM kit def isn't cheap. Im still on the fence about it, but I'm leaning towards no upgrade and just maxing out the regular turbos.

You changing kits?

zguynate · 12-09-2015, 02:43 PM

As far as I know, Alterception is the first and only person who has purchased the upgrade so far. My knowledge on it is very limited, but I'm not sure if it is a direct turbo swap, or if something inside the turbo is swapped out, still using the original housing.

zguynate · 12-09-2015, 02:53 PM

Quote:

Originally Posted by jwick

You changing kits?

Yeah. To reach my power goals I was going to have to buy a new turbo, get the larger 3 inch charge piping, and possibly modify the downpipe to allow more flow. I was given a pretty incredible deal (sponsorship) through AAM, so I decided to make the switch to their kit. It was a pretty unique opportunity that came at a perfect time.

jwick · 12-09-2015, 03:15 PM

Quote:

Originally Posted by dragonbreath

Yeah. To reach my power goals I was going to have to buy a new turbo, get the larger 3 inch charge piping, and possibly modify the downpipe to allow more flow. I was given a pretty incredible deal (sponsorship) through AAM, so I decided to make the switch to their kit. It was a pretty unique opportunity that came at a perfect time.

Nice. If I end up with a built motor I'll likely be disappointed I didn't go TT too. Of course there wasn't a TT option for a G when I took the plunge so nothing to really regret.

zguynate · 12-09-2015, 03:23 PM

Quote:

Originally Posted by jwick

Nice. If I end up with a built motor I'll likely be disappointed I didn't go TT too. Of course there wasn't a TT option for a G when I took the plunge so nothing to really regret.

You might just have to pioneer another solution like you did with BP

I have no issues with the BP kit by any means. After some thought and number crunching, it was actually a tad bit cheaper to switch kits believe it or not. Modifying the downpipe would have been pretty expensive, the turbo, and the new charge pipes.... after adding all of that and what I could sell the BP kit for, it was cheaper to get the AAM kit.

As part of my contract, Ill be giving my review of the AAM kit, and my experiences with both kits and how they fare against each other. It won't be apples and apples because of the different power levels, but another bit of research to help other forum members in their searches.

clkio · 12-15-2015, 11:29 AM

AAM just called me and told me my baby made 680WHP on 93 octane pump gas!!! will post more after the weekend

Z&I · 12-15-2015, 11:39 AM

Quote:

Originally Posted by clkio

AAM just called me and told me my baby made 680WHP on 93 octane pump gas!!! will post more after the weekend

Built motor ?
EcuTek Tune ?
I got's to know

Mines goin' to the Dyno down there ~ hopefully before years end ...

clkio · 12-15-2015, 11:40 AM

build motor, ecutek as well! good luck buddy!!!

TerribleONE · 12-15-2015, 11:41 AM

Quote:

Originally Posted by clkio

AAM just called me and told me my baby made 680WHP on 93 octane pump gas!!! will post more after the weekend

How much boost? Did you get a torque number?

clkio · 12-15-2015, 11:41 AM

17 psi, no I didn't yet

Hotrodz · 12-15-2015, 12:34 PM

Wow, e85 and about 6 more psi and you be looking 800 in the face. Nice numbers...

Sent from my SM-N910P using Tapatalk

clkio · 12-15-2015, 05:10 PM

thanks man. Actually, they telling me if I decide to go E85, they think it will make 775-800WHP without increasing boost.

hjo1078 · 12-15-2015, 05:20 PM

Awesome congrats!

Sent from my iPhone using Tapatalk

12-09-2015, 02:43 PM	#694 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,053 Drives: 09 370z Rep Power: 73	As far as I know, Alterception is the first and only person who has purchased the upgrade so far. My knowledge on it is very limited, but I'm not sure if it is a direct turbo swap, or if something inside the turbo is swapped out, still using the original housing. __________________ 2009 370z touring w/sports package

12-15-2015, 11:29 AM	#698 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 11	AAM just called me and told me my baby made 680WHP on 93 octane pump gas!!! will post more after the weekend hjo1078 and Z&I like this.

12-15-2015, 12:34 PM	#703 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	Wow, e85 and about 6 more psi and you be looking 800 in the face. Nice numbers... Sent from my SM-N910P using Tapatalk hjo1078 likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

12-15-2015, 05:10 PM	#704 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 11	thanks man. Actually, they telling me if I decide to go E85, they think it will make 775-800WHP without increasing boost. hjo1078 and SS_Firehawk like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 12:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 12:14 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 12:36 AM
Forced Induction gains and 7AT	kannibul	Forced Induction	18	10-14-2009 12:36 PM
Best trans for forced induction	madweazl	Engine & Drivetrain	24	08-07-2009 04:20 PM

12-15-2015, 11:40 AM	#700 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 11	build motor, ecutek as well! good luck buddy!!!

12-15-2015, 11:41 AM	#702 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 11	17 psi, no I didn't yet

12-15-2015, 05:20 PM	#705 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 45 Posts: 572 Drives: twin turbo 370z Rep Power: 5395	Awesome congrats! Sent from my iPhone using Tapatalk