Forced Induction Finished Builds

Spooler · 08-20-2021, 09:07 AM

Quote:

Originally Posted by Cars_go_vroom

Al tried to connect me with you but he said you were to busy.

I broke over 1kwhp and have been beating the hell out of the car. I built the car back in 2012 and got it 99.99% operational and running. He said we should chat.

Start a thread and share your build. Most folks don't last long at 900whp much less 1000whp. It would be nice to see how yours is built. Share with us if you don't mind.

Cars_go_vroom · 08-21-2021, 01:30 PM

Quote:

Originally Posted by Spooler

Start a thread and share your build. Most folks don't last long at 900whp much less 1000whp. It would be nice to see how yours is built. Share with us if you don't mind.

Alright. I'll do a write up about it. Give me a moment please.

rspray2000 · 09-24-2022, 07:45 PM

Had planned to wait until I had dyno numbers, but a poorly run dyno day event prevented me from getting my numbers today, so I'll update at a later point:
Engine
N/A
Z1 2.5" Intakes
Dewla Air Guide
Shipping/tax
EcuTek tuning w/Admin
Forced Induction 12 psi on 93
Stillen Supercharger
Top Gun Air to Air Conversion
Injector Dynamics ID850
9 lb pulley & belt tensioner
Stillen 25-row Oil Cooler
Fast Intentions CBE w/18" Resonators
Fast Intentions Resonated HFC's
Radium Surge Tank, Hellcat 525
Aero 340lph Stealth Fuel Pump
EcuTek tuning w/Eugene Turkov
Admin Tuning Combo Catch Can
Transmission
VR30 donor transmission
LOJ Billet Flexplate
Godzilla Raceworks Driveshaft
Suspension / Brakes
Z1 S-Pro Coilovers
Z1 2-piece Rotors (4)
EBC Yellowstuff
Whiteline Front Sway bar
Fast Intentions Front Tow Bar
Exterior
Enkei RS05RR 18x9.5 (f) 18x11 (r)
275/40-18 Nitto NT555G2 (f)
315/35-18 Toyo TQ (r)
Carbon fiber door handle covers
Morimoto Taillights
EPR TK Carbon Fiber Front Lip
EPR Carbon Fiber Side Skirts

09-24-2022, 07:45 PM	#3 (permalink)
rspray2000 Base Member Join Date: Mar 2019 Location: MA Posts: 169 Drives: 2013 T/S Roadster AT Rep Power: 4235	Finished Supercharger build (for now) Had planned to wait until I had dyno numbers, but a poorly run dyno day event prevented me from getting my numbers today, so I'll update at a later point: Engine N/A Z1 2.5" Intakes Dewla Air Guide Shipping/tax EcuTek tuning w/Admin Forced Induction 12 psi on 93 Stillen Supercharger Top Gun Air to Air Conversion Injector Dynamics ID850 9 lb pulley & belt tensioner Stillen 25-row Oil Cooler Fast Intentions CBE w/18" Resonators Fast Intentions Resonated HFC's Radium Surge Tank, Hellcat 525 Aero 340lph Stealth Fuel Pump EcuTek tuning w/Eugene Turkov Admin Tuning Combo Catch Can Transmission VR30 donor transmission LOJ Billet Flexplate Godzilla Raceworks Driveshaft Suspension / Brakes Z1 S-Pro Coilovers Z1 2-piece Rotors (4) EBC Yellowstuff Whiteline Front Sway bar Fast Intentions Front Tow Bar Exterior Enkei RS05RR 18x9.5 (f) 18x11 (r) 275/40-18 Nitto NT555G2 (f) 315/35-18 Toyo TQ (r) Carbon fiber door handle covers Morimoto Taillights EPR TK Carbon Fiber Front Lip EPR Carbon Fiber Side Skirts __________________ For Sale! 2013 Roadster in Black Cherry, Touring with Sport / Stillen Supercharger with Topgun A2A Conversion / VR30 7AT Swap Build Details Last edited by rspray2000; 02-28-2025 at 07:59 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 12:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 12:14 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 12:36 AM
Forced Induction gains and 7AT	kannibul	Forced Induction	18	10-14-2009 12:36 PM
Best trans for forced induction	madweazl	Engine & Drivetrain	24	08-07-2009 04:20 PM