Forced Induction Finished Builds

Spooler · 08-19-2021, 03:10 PM

Quote:

Originally Posted by JARblue

And what's your excuse?

989.5whp is not 1000whp....... I may not make it. All good. Whatever.

JARblue · 08-19-2021, 04:36 PM

Quote:

Originally Posted by Spooler

I may not make it.

Cars_go_vroom · 08-19-2021, 04:47 PM

Quote:

Originally Posted by Spooler

SOHO's shop car Nismobae. That's it at the moment.

Gotcha. I tried reading your car build but started to skim through it more than actually read through it.

When you were tuning your car, how hot was it for ya before everything started to throttle due to heat?

For those folks who did hit these power goals and didn't make it to see another day, were they all owned by their heads lifting?

Was that the issue everyone was running into?

Spooler · 08-19-2021, 06:37 PM

Quote:

Originally Posted by Cars_go_vroom

Gotcha. I tried reading your car build but started to skim through it more than actually read through it.

When you were tuning your car, how hot was it for ya before everything started to throttle due to heat?

For those folks who did hit these power goals and didn't make it to see another day, were they all owned by their heads lifting?

Was that the issue everyone was running into?

Yeap, heads lifting. It was 92 deg. ambient on the dyno that day. When going above 25psi of boost the IAT's started to climb. Read the whole thread, start to finish. It will take you about 3 weeks. Watch the videos. That is where the good stuff is.

Cars_go_vroom · 08-19-2021, 08:21 PM

Quote:

Originally Posted by Spooler

Yeap, heads lifting. It was 92 deg. ambient on the dyno that day. When going above 25psi of boost the IAT's started to climb. Read the whole thread, start to finish. It will take you about 3 weeks. Watch the videos. That is where the good stuff is.

Al tried to connect me with you but he said you were to busy.

I broke over 1kwhp and have been beating the hell out of the car. I built the car back in 2012 and got it 99.99% operational and running. He said we should chat.

Spooler · 08-19-2021, 09:30 PM

Quote:

Originally Posted by Cars_go_vroom

Al tried to connect me with you but he said you were to busy.

I broke over 1kwhp and have been beating the hell out of the car. I built the car back in 2012 and got it 99.99% operational and running. He said we should chat.

Work and wife have me crazy busy. You can ask questions on my thread. It's OK.

Cars_go_vroom · 08-19-2021, 09:57 PM

Quote:

Originally Posted by Spooler

Work and wife have me crazy busy. You can ask questions on my thread. It's OK.

sounds good

Spooler · 08-20-2021, 09:07 AM

Quote:

Originally Posted by Cars_go_vroom

Al tried to connect me with you but he said you were to busy.

I broke over 1kwhp and have been beating the hell out of the car. I built the car back in 2012 and got it 99.99% operational and running. He said we should chat.

Start a thread and share your build. Most folks don't last long at 900whp much less 1000whp. It would be nice to see how yours is built. Share with us if you don't mind.

Cars_go_vroom · 08-21-2021, 01:30 PM

Quote:

Originally Posted by Spooler

Start a thread and share your build. Most folks don't last long at 900whp much less 1000whp. It would be nice to see how yours is built. Share with us if you don't mind.

Alright. I'll do a write up about it. Give me a moment please.

rspray2000 · 09-24-2022, 07:45 PM

Had planned to wait until I had dyno numbers, but a poorly run dyno day event prevented me from getting my numbers today, so I'll update at a later point:
Engine
N/A
Z1 2.5" Intakes
Dewla Air Guide
Shipping/tax
EcuTek tuning w/Admin
Forced Induction 12 psi on 93
Stillen Supercharger
Top Gun Air to Air Conversion
Injector Dynamics ID850
9 lb pulley & belt tensioner
Stillen 25-row Oil Cooler
Fast Intentions CBE w/18" Resonators
Fast Intentions Resonated HFC's
Radium Surge Tank, Hellcat 525
Aero 340lph Stealth Fuel Pump
EcuTek tuning w/Eugene Turkov
Admin Tuning Combo Catch Can
Transmission
VR30 donor transmission
LOJ Billet Flexplate
Godzilla Raceworks Driveshaft
Suspension / Brakes
Z1 2-piece Rotors (4)
EBC Yellowstuff
Whiteline Front Sway bar
Fast Intentions Front Tow Bar
Exterior
Enkei RS05RR 18x9.5 (f) 18x11 (r)
275/40-18 Nitto NT555G2 (f)
315/35-18 Toyo TQ (r)
Carbon fiber door handle covers
Morimoto Taillights
EPR TK Carbon Fiber Front Lip
EPR Carbon Fiber Side Skirts

Clippers_FTW · 11-07-2023, 11:07 PM

are we EVER really finished? but here is my build
stock block vq37vhr
updated ecu for ecutek
Soho Stage 2.5 turbo kit
ID1300cc injectors
CJM fuel return (custom setup made by Charles himself for my kit)
Hellcat 525 fuel pump
stillen 3 inch exhaust (from 350Z)
DeatschWerks Fuel pump relay
Mac Solonoid
z speed super six rigid stage 4 race clutch
specialty z flex fuel kit

im sure i have a lot more but I cant think about it right now lol

the car made 618whp and 498tq on wastegate only.... numers seem low but the car is extremely fast and more than what is needed for the street

2nd engine currently in my garage about to be built . every single part was put on by me on jack stands in my extremely small apartment garage lol

09-24-2022, 07:45 PM	#880 (permalink)
rspray2000 Base Member Join Date: Mar 2019 Location: MA Posts: 167 Drives: 2013 T/S Roadster AT Rep Power: 4234	Finished Supercharger build (for now) Had planned to wait until I had dyno numbers, but a poorly run dyno day event prevented me from getting my numbers today, so I'll update at a later point: Engine N/A Z1 2.5" Intakes Dewla Air Guide Shipping/tax EcuTek tuning w/Admin Forced Induction 12 psi on 93 Stillen Supercharger Top Gun Air to Air Conversion Injector Dynamics ID850 9 lb pulley & belt tensioner Stillen 25-row Oil Cooler Fast Intentions CBE w/18" Resonators Fast Intentions Resonated HFC's Radium Surge Tank, Hellcat 525 Aero 340lph Stealth Fuel Pump EcuTek tuning w/Eugene Turkov Admin Tuning Combo Catch Can Transmission VR30 donor transmission LOJ Billet Flexplate Godzilla Raceworks Driveshaft Suspension / Brakes Z1 2-piece Rotors (4) EBC Yellowstuff Whiteline Front Sway bar Fast Intentions Front Tow Bar Exterior Enkei RS05RR 18x9.5 (f) 18x11 (r) 275/40-18 Nitto NT555G2 (f) 315/35-18 Toyo TQ (r) Carbon fiber door handle covers Morimoto Taillights EPR TK Carbon Fiber Front Lip EPR Carbon Fiber Side Skirts __________________ 2013 Roadster in Black Cherry, Touring with Sport / Stillen Supercharger with Topgun A2A Conversion / VR30 7AT Swap Build Details Last edited by rspray2000; 02-10-2024 at 10:11 AM.

11-07-2023, 11:07 PM	#881 (permalink)
Clippers_FTW Base Member Join Date: Apr 2021 Location: SoCal Posts: 8 Drives: 2008 Infiniti G37s Rep Power: 4	are we EVER really finished? but here is my build stock block vq37vhr updated ecu for ecutek Soho Stage 2.5 turbo kit ID1300cc injectors CJM fuel return (custom setup made by Charles himself for my kit) Hellcat 525 fuel pump stillen 3 inch exhaust (from 350Z) DeatschWerks Fuel pump relay Mac Solonoid z speed super six rigid stage 4 race clutch specialty z flex fuel kit im sure i have a lot more but I cant think about it right now lol the car made 618whp and 498tq on wastegate only.... numers seem low but the car is extremely fast and more than what is needed for the street 2nd engine currently in my garage about to be built . every single part was put on by me on jack stands in my extremely small apartment garage lol redondoaveb likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 12:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 12:14 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 12:36 AM
Forced Induction gains and 7AT	kannibul	Forced Induction	18	10-14-2009 12:36 PM
Best trans for forced induction	madweazl	Engine & Drivetrain	24	08-07-2009 04:20 PM