Topgunz full supercharger kits!!

Chrisc3 · 04-22-2018, 04:56 PM

I was thinking about holding off on boosting the z and grabbing a 2nd vehicle for a daily but im really thinking about getting this kit.
Im curious to what you guys would recommend need to be done to the motor to hold this power reliably.

G3RSTY7 · 04-23-2018, 09:50 AM

Got most of my kit figured out and mostly mocked up yesterday, will finish when hangover wears off. Two questions that came up were—is there supposed to be a gasket under the clamp that holds the TiAl on to the T pipe? That seems like it’d leak—is there a part #? Also noticed the width of the 2.85” and 3” pulleys were slightly different, does that matter with which belt I use? Or I just imagine use whichever ribs is most level with the rest of the pulleys

TopgunZ · 04-23-2018, 10:03 AM

The Tial does not need a gasket/o-ring.

In that picture you have the one stillen 9psi pulley (7rib) that goes on the serpentine and the 3.2" pulley (8rib) that goes on the supercharger. You need to put the 8 rib on the back of the head unit and the other one can be swapped with the 8psi pulley (silver) that came on the kit.

G3RSTY7 · 04-23-2018, 11:29 AM

Thanks. So there’s 3 total 45deg couplers. Do I have this right? Blue to blower, shorter 45(SH-275-90) to back throttle body, and bigger 45 degree intercooler-charge pipe?

MAP sensor that came with the innovate is different looking out of the box at least. All I have left is I need to check the fuel pump housing before I can order a RFS since I have an earlier model G37 I may have the 350/G35 housing or 370z housing. Talked to Seb, hoping to have this on and doing the tunes in a couple weeks/by second week of May.

TopgunZ · 04-23-2018, 11:33 AM

Quote:

Originally Posted by G3RSTY7

Thanks. So there’s 3 total 45deg couplers. Do I have this right? Blue to blower, shorter 45(SH-275-90) to back throttle body, and bigger 45 degree intercooler-charge pipe?

You have it right in the picture, just not in your verbage. There is technically only 1 45* coupler. It goes 60* (Blue) to 45* (IC) to 90* (rear TB).

G3RSTY7 · 04-23-2018, 03:44 PM

Ordered RFS from CJM. Now the waiting game. What are people’s thoughts on thermal wrapping the charge pipe? Worth it do wrap it while I wait or a waste of time/counterproductive?

jwick · 04-24-2018, 06:25 PM

Quote:

Originally Posted by G3RSTY7

Ordered RFS from CJM. Now the waiting game. What are people’s thoughts on thermal wrapping the charge pipe? Worth it do wrap it while I wait or a waste of time/counterproductive?

Doubt there’s any benefit. The major reason for wrapping is to protect other stuff from the heat. The hot side on a turbo setup for example. There isn’t enough heat on that side to worry about much.

ANMVQ · 04-25-2018, 07:49 AM

Hey TopgunZ! Still following this

Love all the happy guys with this kit!

BTW any of these been put a Q50 AWD?

TopgunZ · 04-27-2018, 07:20 AM

Quote:

Originally Posted by ANMVQ

Hey TopgunZ! Still following this

Love all the happy guys with this kit!

BTW any of these been put a Q50 AWD?

Hey bud its been a while. I have not sold a kit to any Q50 owners yet but it looks like you are rockin one now. AWD!

ANMVQ · 04-27-2018, 01:59 PM

Quote:

Originally Posted by TopgunZ

Hey bud its been a while. I have not sold a kit to any Q50 owners yet but it looks like you are rockin one now. AWD!

Yes it's been, never left LOL BMW was fun for like a year then needed a motor and warranty was joke

. So went back to where I should have stayed.

Really thinking about this kit, Just not soon, Wife and I opened a business( See sig) so $$$ is tired up right now but really happy you did this for us!
Thanx man

ANMVQ · 06-19-2018, 07:38 AM

Quote:

Originally Posted by TopgunZ

Hey bud its been a while. I have not sold a kit to any Q50 owners yet but it looks like you are rockin one now. AWD!

Hey

, So does you kit fir the sedans? Just curious cause it seems I'm seeing a lot of talk over on MYG37 and guys are saying the kit will not fit a sedan? The intake pipe is to short? Thanx man!

TopgunZ · 05-14-2018, 08:08 AM

Has anybody fit the 70mm throttle bodies up to the Stillen manifold yet?

brucelidat · 05-17-2018, 06:56 PM

Dropping the car off with Seb this Saturday for install and tune.

ANMVQ · 05-21-2018, 11:17 AM

Quote:

Originally Posted by brucelidat

Dropping the car off with Seb this Saturday for install and tune.

It's Monday LOL how'd it ogo

brucelidat · 05-21-2018, 12:15 PM

Car is with Seb, Will get it back in a week or 2. Might do a new fuel system too so maybe a bit longer.

04-23-2018, 10:03 AM	#3 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	The Tial does not need a gasket/o-ring. In that picture you have the one stillen 9psi pulley (7rib) that goes on the serpentine and the 3.2" pulley (8rib) that goes on the supercharger. You need to put the 8 rib on the back of the head unit and the other one can be swapped with the 8psi pulley (silver) that came on the kit. G3RSTY7 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-23-2018, 03:44 PM	#6 (permalink)
G3RSTY7 Base Member Join Date: Aug 2017 Location: Colorado Posts: 103 Drives: Infiniti G37s 6MT Rep Power: 8	Ordered RFS from CJM. Now the waiting game. What are people’s thoughts on thermal wrapping the charge pipe? Worth it do wrap it while I wait or a waste of time/counterproductive? phunk likes this. __________________ 09 G37S RWD 6MT, Topgunz Supercharger, CJM RFS, Walbro 450, 1050x, Nismo 1.5way LSD, Ecutek FF tuned by Seb IG: G3RSTY7 MyG37.com: RickyBobby

04-25-2018, 07:49 AM	#8 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	Hey TopgunZ! Still following this Love all the happy guys with this kit! BTW any of these been put a Q50 AWD? __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

05-14-2018, 08:08 AM	#12 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Has anybody fit the 70mm throttle bodies up to the Stillen manifold yet? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-17-2018, 06:56 PM	#13 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	Dropping the car off with Seb this Saturday for install and tune. 370Z JT, ANMVQ, TopgunZ and 1 others like this. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

04-22-2018, 04:56 PM	#1 (permalink)
Chrisc3 Base Member Join Date: Nov 2014 Location: texas Posts: 123 Drives: 2009 370z white Rep Power: 11	I was thinking about holding off on boosting the z and grabbing a 2nd vehicle for a daily but im really thinking about getting this kit. Im curious to what you guys would recommend need to be done to the motor to hold this power reliably.

05-21-2018, 12:15 PM	#15 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	Car is with Seb, Will get it back in a week or 2. Might do a new fuel system too so maybe a bit longer. 370Z JT, ANMVQ and redondoaveb like this. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
street /carb legal turbo or supercharger kits	pyrrhus17	Engine & Drivetrain	9	03-08-2023 05:37 PM
2012-2016 Nismo STILLEN Supercharger Kits on Sale!	Team_STILLEN	Sponsor Classifieds	0	07-12-2016 02:05 PM
STILLEN Supercharger 2009-2011 370Z kits - $500 off!	Team_STILLEN	Sponsor Classifieds	3	06-19-2016 01:06 PM
[FOR SALE] stilllen supercharger full kit.	btimola	Parts for sale (Private Classifieds)	22	12-14-2014 08:23 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM