RJ MFG Supercharger kit Feeler...

Wonka2581 · 01-13-2017, 01:54 PM

Quote:

Originally Posted by JJ's370z

We get so ripped off here in Australia

Carbon bonnet - illegal unless Porsche GT cars etc

Aftermarket steering wheel - illegal

Aftermarket seats illegal (unless Recaro Sportster CS from Nissan $5300USD)

Exhaust cannot exceed 90db @4500rpm (unless Ferrari / lambo etc in race mode

Lowest part of the car cant be lower than 100mm that includes exhaust (unless Porsche Ferrari etc)

Certain HID lights are illegal (all coloured lights illegal)

Tinted lights illegal, max legal window tint 30% (they have a device to measure)

Test pipes/ no cats $1300USD on the spot fine minimum - maximum fine?...more than the RJM SC kit

If the police are in a bad mood they can pull you over - you have to follow them back to a DMV style factory where they put your car on a hoist and start going through everything and start ending your world very quickly and painfully.

Wastegate / vent to atmosphere is illegal

All pod filters need to be enclosed if they can see your CAI - defect

Cant cut reshape modify crash bars or structures for the fitment of Intercoolers

Gauges aren't allowed on the dash or anywhere above the steering wheel, cant have a gps stuck on the windscreen.

USD$325 fine talking or "even holding phone in car" and 25% (3pts) of all your driving licence points for 3 years. Can only touch phone if affixed to a hard mount.

Personal income tax up to 45%

In the classifieds today:
2016 370z 0'kms convertible USD$57,000
2016 BMW m4 convertible 0'kms USD$135,000

Average median house price in Sydney USD$770k - Melbourne 530k USD "average"

Paid US$5.10 per gallon today to fill up the Z. United 100 pump gas -has a US rating of 95.75!

Normal Shell Optimax 98 is about $4.70p/gallon and has a US rating of 94

I could go on forever but I'll leave you guys with this one

0.6mph over the speed limit?? $USD175 on the spot fine

No Cookies | The Advertiser

Gotta love Australia

oh and everythings trying to kill you on land and in water but apart from that everythings great!

RJM if you can design a low profile "stealthy" hood i'll run the risk of buying this kit i want it that bad.

Oh hell no!!! I feel for ya man...

TopgunZ · 01-13-2017, 01:52 PM

Uhhhhhh.... I would just buy a sports bike. Or are those illegal there too? Lol

370Z-GUY · 01-13-2017, 08:54 PM

Very interested in this kit too.

Bit bummed out about the hood (Australian) but everything else looks great.

What are some supporting mods I should start collecting?

Quote:

Originally Posted by TopgunZ

Uhhhhhh.... I would just buy a sports bike. Or are those illegal there too? Lol

I ride more then I drive my Z. They don't harass riders as much as drivers.

Sent from my iPhone using Tapatalk

RJ MFG · 01-13-2017, 02:17 PM

They didn't say anything about an FRP hood... just sayin... paint it factory and no one will know

JJ's370z · 01-13-2017, 02:24 PM

Thats what im thinking

-But does reducing the number of laminova cores lower the overall height a bit?

RJ MFG · 01-13-2017, 02:33 PM

Quote:

Originally Posted by JJ's370z

Thats what im thinking

-But does reducing the number of laminova cores lower the overall height a bit?

no it does not. we will supply blanks in the location of missing cores. Saves you money in the event you want to upgrade.

DeliriousClam · 01-13-2017, 03:13 PM

Quote:

Originally Posted by RJ MFG

no it does not. we will supply blanks in the location of missing cores. Saves you money in the event you want to upgrade.

Will you take sexual favors in exchange for one of these systems?

JJ's370z · 01-13-2017, 11:16 PM

Quote:

Originally Posted by RJ MFG

no it does not. we will supply blanks in the location of missing cores. Saves you money in the event you want to upgrade.

Ok thanks for that - When will you be announcing the various stages and corresponding power levels?

bullitt5897 · 01-14-2017, 08:08 AM

Quote:

Originally Posted by JJ's370z

Ok thanks for that - When will you be announcing the various stages and corresponding power levels?

I wouldn't expect any stages and pricing for several weeks. RJ MFG is working with laminova directly about the intercooler core. the design there isn't finalized and that will affect some of the other parts. I can say they are looking into mezeire (sp?) 55gpm pump that has a 3000+ hour pump life! That's a huge leap up from the bosch pumps stillen uses. Also after reviewing the cooling capacity I believe they have decided to stay twin pass on the heat exchanger.

The current idea is to run a 4" crank pulley and a blower pulley ranging from 4"-2.5" for stage one. Now the stage 2 guys I think they are bumping the crank pulley up to a 5"-6" crank pulley. So far I believe they are trying to limit the drive ratio to 2.0. At least for those looking to rev to 8.5k-9k. If you stick to lower revs you can get more of a drive ratio (2.4 if your stock rev limit).

It's definitely going to be interesting to see what they come up with. But if I had to guess I would guess that the price per hp will be competitive. The stillen kit is about $19/whp averaging 420whp on 8psi. The GTM/gamma kit is more expensive at $22/whp averaging 410whp on 8psi. This is based on their retail pricing. So if RJ MFG are able to make 450-500whp on 8psi they would be competitive pricing wise with what they have stated thus far.

I am stoked!

lj909 · 01-13-2017, 04:16 PM

RJM:
The kit will come with ID1000 injectors from the start.

I know your working with space here but i hope your looking at the ID1050x considering the 1000 are known to have issues with ethanol and since we're looking at a raised hood already. ..

RJ MFG · 01-13-2017, 04:27 PM

Quote:

Originally Posted by lj909

RJM:
The kit will come with ID1000 injectors from the start.

I know your working with space here but i hope your looking at the ID1050x considering the 1000 are known to have issues with ethanol and since we're looking at a raised hood already. ..

yes we will be using the latest 1050x

DeliriousClam · 01-13-2017, 07:12 PM

Quote:

Originally Posted by RJ MFG

yes we will be using the latest 1050x

Should I assume the answer to my question is a "no"?

shadow85 · 01-13-2017, 08:03 PM

Quote:

Originally Posted by DeliriousClam

Should I assume the answer to my question is a "no"?

Someone with an avatar like yours asking such questions, I would be freaked out as hell!! Lol no offence

DeliriousClam · 01-14-2017, 12:42 AM

Quote:

Originally Posted by shadow85

Someone with an avatar like yours asking such questions, I would be freaked out as hell!! Lol no offence

I'll tickle your pickle for a whipple

shadow85 · 01-13-2017, 08:06 PM

Btw can RJM try finding a vendor down here in STRAYA' to sell us this RJM kit locally, so us buyers can avoid the heavy import duty and gst.

Or would that be transferred to us via the vendor anyway??

View Poll Results: What kind of Supercharger kit would you like us to make?
Rotrex C38 based system	54	23.79%
Vortech/Procharger Based Kit	40	17.62%
Whipple Positive Displacement Roots Kit	109	48.02%
I dont want a supercharger.	24	10.57%
Voters: 227. You may not vote on this poll

01-13-2017, 01:52 PM	#2 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Uhhhhhh.... I would just buy a sports bike. Or are those illegal there too? Lol __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-13-2017, 02:17 PM	#4 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 286	They didn't say anything about an FRP hood... just sayin... paint it factory and no one will know __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

01-13-2017, 04:16 PM	#10 (permalink)
lj909 Track Member Join Date: May 2014 Location: Riverside Posts: 584 Drives: 40th 370Z Rep Power: 14	RJM: The kit will come with ID1000 injectors from the start. I know your working with space here but i hope your looking at the ID1050x considering the 1000 are known to have issues with ethanol and since we're looking at a raised hood already. .. __________________ PW 07 HR350Z R.I.P. Totaled by 82yr old woman 2010 40th Anniversary 370Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB stillen Supercharger or GTM Supercharger STG 2	ej z34	Wanted	2	11-23-2016 03:57 AM
[FOR SALE] [Feeler] GTM Stage 1.5 Supercharger Kit	AntiVenom	Parts for sale (Private Classifieds)	19	06-01-2016 02:49 PM
Available soon! FEELER	Rayzz	Parts for sale (Private Classifieds)	7	06-23-2015 01:00 PM
[FOR SALE] Feeler	DEpointfive0	Parts for sale (Private Classifieds)	27	01-13-2015 12:18 PM

01-13-2017, 02:24 PM	#5 (permalink)
JJ's370z Base Member Join Date: Aug 2016 Location: Australia Posts: 105 Drives: 14 370z DB M6 Rep Power: 51	Thats what im thinking -But does reducing the number of laminova cores lower the overall height a bit?

01-13-2017, 08:06 PM	#15 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 921 Drives: 15' 370Z A/T AMM TT Rep Power: 26	Btw can RJM try finding a vendor down here in STRAYA' to sell us this RJM kit locally, so us buyers can avoid the heavy import duty and gst. Or would that be transferred to us via the vendor anyway??