Nissan 370Z Forum - View Single Post

TopgunZ · 11-30-2016, 11:36 AM

3. Whipple - This has never been done and would open up an entirely new system to the platform.

I am curious what your plan is to get up to 650whp out of a c38 or v3. These have already been pushed to the ragged edge and it isnt getting close. Especially if you are going to pulley it to stay within the manufacturers suggested rating. The only chance of getting past the 600 mark is going with a V2 but even then you will need to overspin it way over its rated rpms, which has been done with good success on other platforms. But are you going to warranty it if you pulley it to do that?

11-30-2016, 11:36 AM	#5 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	3. Whipple - This has never been done and would open up an entirely new system to the platform. I am curious what your plan is to get up to 650whp out of a c38 or v3. These have already been pushed to the ragged edge and it isnt getting close. Especially if you are going to pulley it to stay within the manufacturers suggested rating. The only chance of getting past the 600 mark is going with a V2 but even then you will need to overspin it way over its rated rpms, which has been done with good success on other platforms. But are you going to warranty it if you pulley it to do that? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM