Best sway bars and endlinks for 370z?

Originally Posted by ValidusVentus

I have a few inputs. I would not reccommend the WL bars, because they are solid. The inner material does very little to contribute to the twisting resistance of the bar. This translates to noticeably increased mass with very little gain. Race cars use hollow bars for a reason. I would also question putting a stiffer bar in the front especially while simultaneously removing the rear bar. This might be an OK setup for a drag car (except you might remove the front bar entirely for weight savings) but you will end up with GROSS under steer in low speed corners with those changes. Stock, the car already under steers at the limit, either of those changes by themselves would make the under steer worse but together, man, I would think it'd be tough to go around a corner at all lol. More of the cars mass is already over the front tires so in order to get your weight transfer and hence, grip, somewhat even you need to have more roll resistance on the rear of the car from roll bars assuming you stay with stock spring rates.

Originally Posted by cossie1600

I was in your camp until I saw how little a set of stiff springs did for the car, the sway bar is very important in controlling the sway on the car.