[Official] 370z wheel fitment guide (pics/specs) only

370z1

You guys have some really nice set ups. Here is what I am running, no issues with this set up.

TIRES:
Brand: HandKook
Model, VENTUS V12,
Fronts 255/35/19
Rears 305/30/19

WHEELS:
Brand: MRR WHEELS
Model: GT-5
Rim Width: 19x9.5 (Rear)
Rim Width: 19x8.5 (Front)
Bolt Pattern: 5x114.3
Rim Offset: 35mm (Rear), Lip Depth: 3 inches
Rim Offset: 45mm (Front) , Lip Depth: 2 Inches
Rim Structure: One Piece
Factory Stud Thread: M12 x 1.25

SPACERS:
Brand: H&R
Fronts: No spacers
Rears: 20mm installed (longer studs installed)

SPRINGS:
Brand: TEIN
Front lowered by: 0.9 inches
Rears lowered by: 0.7 inches

ALIGNEMENT:
Front stock Camber and Toe: Left at factory settings.
Rear stock Camber: Reduced negative camber towards neutral (flat) position. After the springs were installed it increased the negative camber. It was at 3.5 degrees and was adjusted to max available neutral position of 2.25 degrees.
Rear stock Toe: Adjusted from 3/8ths in to 1/8th in.

Attached Images

	2.jpg (74.9 KB, 1048 views)
	1.jpg (50.4 KB, 666 views)
	3.jpg (54.5 KB, 597 views)
	4.jpg (72.6 KB, 499 views)
	5.jpg (53.1 KB, 374 views)
	6.jpg (50.6 KB, 347 views)
	7.jpg (62.1 KB, 489 views)
	8.jpg (70.0 KB, 360 views)
	a.jpg (87.4 KB, 287 views)
	b.jpg (79.6 KB, 313 views)
	c.jpg (85.7 KB, 356 views)
	d.jpg (118.5 KB, 466 views)