Optimal ride height for track setup

Originally Posted by Hotrodz

On the street you are going to be hating life. I ran mine at that ride height the last time I was at ZDAYZ. I was on Toyo 295 30 18 square. My camber was -3.3 front and -2.2 rear. The handling was spot on. Turn in was quick and she was nimble. The down side is there are some sharp turns with quick rises and I would bottom out on them. When got home I had two rivets left on my Zspeed undertray and there was a small hole was forming on the undertray. Conversely getting in an out of parking areas and gas stations were a pain. If she is 80% track car go for it. I am looking at 26 up front and 26.5 rear.

Sent from my SM-G965U using Tapatalk

Originally Posted by OptionZero

time for an air cup system for the parking area part

Originally Posted by Brendan

I agree with my esteemed college Hotrodz. That low and your chassis will be limiting your suspension from doing it's job and it will be a pain on the street.