Rusty

https://10thplanetcoloradosprings.com/

If you ever want to hang out some time. I can clear my schedule, just make an appointment.

I purchased Penske double adjustables in the end. Have used this in my V8 MGB GT for 10 years and really comfortable with setting them up.

Our shock guru here in Melbourne offers a testing service ... brings his van to the track if we are testing and can re-valve on the spot if required.

Looking at 23kg/mm front springs and 8kg/mm at the rear with true coil-over to start and then we'll see.

Hey Rusty

How much SPL gear do you have in your car ... all of it ?

I'm about to go pure coil-over and do "all" the rear suspension plus impact bush and LCA bush for front suspension .. worth going titanium over billet alloy ?

Robin Bailey

Sorry Rusty, I just saw your reply today. Thanks for the Bilstein advice. I just had a couple diff bushings replaced, so I'll be doing the front struts next.

Hey Zington. i have a 2013 GC TrailHawk with the airride suspension. And a 2008 2500 PowerWagon. If I was you. I would go with the Bilsteins. I have the 7100's with remote reservoirs on my PowerWagon. I would steer clear of the Rancho's.

Hi Rusty. I seem to remember you also have a Jeep GC, or Ram 1500 with the 5.7... sorry if I'm mistaken. If so, I'm looking to buy new struts for my jeep Commander 5.7 4x4. Looking at Bilstein, kyb and Rancho. Any opinion would be appreciated. If no opinion, no sweat. This will be my first strut swap on this vehicle. Thanks!

Hey I’m think about purchasing those hood vents. I was wondering if you could make me a set of inserts for the hood vents?

Rusty, thank for you input. When you said "The pads need bedding. 2 new set of pads and never bedded them." Did you mean you had the same problem with two sets of pads before you tried bedding ?

Lmao!

Pls visit my thread again.... I'd like your input

That thread is for the CBE's. This thread is for the LTH's. :D This is what the LTH's, 12" resonators, and CBE sounds like. :D I had the mike taped to the license plate. ;) Px01a-xZJk4

Got to get me one of these. Just for the baller look! :excited:

Hi all! I bought a used '11 GM Nismo 6M in Dec of '11. Had just over 7,000 miles on it. The Nismo was on my short list of sport cars that I like. Had a chance to get a '06 Viper ACR at a really...

Here's mine. :D

I got the Z1 34 row cooler and the AAM oil pan spacer. So I have about 8qts of oil. On my last trackday. It was 97F. After my last 30 minute session, my oil temp was 200F. During the winter. I put a...

Thank you. :tiphat:

Eveybody has an opinion on oil. What it comes down to is to change it often and to control it's temperature with an oil cooler when tracking with whatever oil you use. ;)

The last five minutes of my 3rd session. :D Px01a-xZJk4

Here's a video from my 3rd session, at the end. Can't edit the video for the middle part. :mad: Which I did my best lap times, chasing a build mustang around. :tup: He couldn't get away from me,...

The color is holding just fine. :tup: My RR caliper has a stain running down it from brake fluid. :mad: I forgot to wash it off the last time I bled my brakes. :shakes head:

Here's a video from my 3rd session, at the end. Can't edit the video for the middle part. :mad: Which I did my best lap times, chasing a build mustang around. :tup: He couldn't get away from me,...

Here's a video from my 3rd session, at the end. Can't edit the video for the middle part. :mad: Which I did my best lap times, chasing a build mustang around. :tup: He couldn't get away from me,...

Like this. Xe5ldu2jB2E

Like this. Xe5ldu2jB2E

Like this. Xe5ldu2jB2E