Mr. G. Brettin's Slow Motion Leg Hump

gbrettin · 03-29-2019, 09:52 PM

Took some measurements for crank and bearing clearances.

Zezus · 03-29-2019, 10:17 PM

This is the only build I'm subbed to. This does something to my nether regions...

Sent from my SM-G965U using Tapatalk

gbrettin · 04-07-2019, 09:37 AM

Went out to the shop to gap rings. I was able to get 15 rings done but ended up breaking the last ring. The last ring was used to square up the rings for measurements while it was on the piston. When the time came to take off the ring, I man handled it and broke the ring. Apparently rings are very brittle... noted...

All the rings are gapped to .23.

Guess I'll need to order a new ring Monday. CP probably only sells them in packs of 8. Oh well. Live and learn.

Rusty · 04-07-2019, 02:01 PM

Don't feel bad. I've broken a few rings myself.

Used to have to file the ends down with a small file. Had to be careful of not flaking the coating off the rings.

gbrettin · 05-20-2019, 05:57 PM

Ok, back from Zdayz and now I can concentrate on my build again.

Prior to going to Zdayz (March) I had ordered LOJ motor mounts because Sikky d1cked me around on their billet motor mounts. LOJ shipped the mounts directly to Bryan Settle, who has a LS swapped 350z, so he can make a few adjustments due to the projected power levels. Bryan pressed out the urethane bushings, pressed in billet cylinders and swapped the M8 bolts for M10.

We think the few tweaks will go a long way.

Coming up this weekend, I'm going to attempt on getting the short block together. The broken ring should be in this week.

gbrettin · 06-09-2019, 09:28 AM

Last ring filed and all rings were put on the pistons. I used piston ring pliers this time so I didn't break another one.

Crank has been added to block and torqued down.

Elmo370z · 06-09-2019, 11:54 AM

Gay!!!! . Sike can’t wait to see the finish build

gbrettin · 06-15-2019, 06:25 PM

Got out to the shop and stretched the rod bolts and half of the pistons in. Let me tell you, CP made some REALLY strong retainer clips. We had to look up a video to see what others were doing.

madwi · 06-15-2019, 06:37 PM

Progress! Good to see it coming together.

gbrettin · 06-15-2019, 06:48 PM

Thanks man. I know I'm slow at all this but engine building isn't my profession. I'm literally learning everything as I go from professional builders.

madwi · 06-15-2019, 06:54 PM

Quote:

Originally Posted by gbrettin

Thanks man. I know I'm slow at all this but engine building isn't my profession. I'm literally learning everything as I go from professional builders.

No worries from me. I'm worried about throwing the new rear diff together, an engine build is out of my league.

Rusty · 06-15-2019, 06:56 PM

Quote:

Originally Posted by gbrettin

Thanks man. I know I'm slow at all this but engine building isn't my profession. I'm literally learning everything as I go from professional builders.

Engine builders will not tell you all the little tricks that they know.

gbrettin · 06-15-2019, 07:00 PM

Quote:

Originally Posted by Rusty

Engine builders will not tell you all the little tricks that they know.

True, but my buddy is telling me everything he knows (pro builder) and is working with me the whole time (because I ask questions every two seconds).

gbrettin · 06-21-2019, 07:22 PM

Back out to the shop and hung the last four rods and pistons. Also, Auto Dynamix of Kalamazoo now has a Dynojet Dyno. If you are in the West MI area and want dyno time, HMU.

gbrettin · 06-26-2019, 08:04 PM

Well, I put the cam in and was going to push further today but.... I seemed to have lost my cam retaining plate.

Only takes one thing to stop everything. heh, what ever. I've come to the conclusion that I can't push this thing fast. I ordered a couple other to keep things rolling... until it doesn't

03-29-2019, 09:52 PM	#61 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Took some measurements for crank and bearing clearances. Rusty and Zezus like this. Last edited by gbrettin; 03-29-2019 at 09:55 PM.

03-29-2019, 10:17 PM	#62 (permalink)
Zezus Enthusiast Member Join Date: Dec 2018 Location: Cincinnati Posts: 354 Drives: 2016 370z sport 6spd Rep Power: 50338	This is the only build I'm subbed to. This does something to my nether regions... Sent from my SM-G965U using Tapatalk gbrettin likes this.

04-07-2019, 09:37 AM	#63 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Went out to the shop to gap rings. I was able to get 15 rings done but ended up breaking the last ring. The last ring was used to square up the rings for measurements while it was on the piston. When the time came to take off the ring, I man handled it and broke the ring. Apparently rings are very brittle... noted... All the rings are gapped to .23. Guess I'll need to order a new ring Monday. CP probably only sells them in packs of 8. Oh well. Live and learn. Rusty, madwi and Baronsmokes like this. Last edited by gbrettin; 04-07-2019 at 09:56 AM.

04-07-2019, 02:01 PM	#64 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,859 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Don't feel bad. I've broken a few rings myself. Used to have to file the ends down with a small file. Had to be careful of not flaking the coating off the rings. gbrettin likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

05-20-2019, 05:57 PM	#65 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Ok, back from Zdayz and now I can concentrate on my build again. Prior to going to Zdayz (March) I had ordered LOJ motor mounts because Sikky d1cked me around on their billet motor mounts. LOJ shipped the mounts directly to Bryan Settle, who has a LS swapped 350z, so he can make a few adjustments due to the projected power levels. Bryan pressed out the urethane bushings, pressed in billet cylinders and swapped the M8 bolts for M10. We think the few tweaks will go a long way. Coming up this weekend, I'm going to attempt on getting the short block together. The broken ring should be in this week. Rusty, Hotrodz, madwi and 1 others like this.

06-09-2019, 09:28 AM	#66 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Last ring filed and all rings were put on the pistons. I used piston ring pliers this time so I didn't break another one. Crank has been added to block and torqued down. Rusty, Hotrodz and madwi like this.

06-09-2019, 11:54 AM	#67 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Gay!!!! . Sike can’t wait to see the finish build gbrettin likes this.

06-15-2019, 06:25 PM	#68 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Got out to the shop and stretched the rod bolts and half of the pistons in. Let me tell you, CP made some REALLY strong retainer clips. We had to look up a video to see what others were doing. Rusty, Hotrodz, madwi and 1 others like this. Last edited by gbrettin; 06-16-2019 at 05:01 PM.

06-15-2019, 06:37 PM	#69 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,400 Drives: Granma red Z Rep Power: 2684428	Progress! Good to see it coming together. gbrettin and Hotrodz like this.

06-15-2019, 06:48 PM	#70 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Thanks man. I know I'm slow at all this but engine building isn't my profession. I'm literally learning everything as I go from professional builders. Rusty, Hotrodz, madwi and 3 others like this.

06-21-2019, 07:22 PM	#74 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Back out to the shop and hung the last four rods and pistons. Also, Auto Dynamix of Kalamazoo now has a Dynojet Dyno. If you are in the West MI area and want dyno time, HMU. Rusty, Hotrodz, madwi and 3 others like this.

06-26-2019, 08:04 PM	#75 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Well, I put the cam in and was going to push further today but.... I seemed to have lost my cam retaining plate. Only takes one thing to stop everything. heh, what ever. I've come to the conclusion that I can't push this thing fast. I ordered a couple other to keep things rolling... until it doesn't Rusty, Hotrodz and madwi like this. Last edited by gbrettin; 06-26-2019 at 09:13 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racing in Slow Motion IV	MightyBobo	The Lounge (Off Topic)	4	03-12-2013 08:12 PM
Racing In Slow Motion IV	Robert_K	The Lounge (Off Topic)	1	07-13-2012 11:01 AM
Slow shipping slow response slow everything	thispecialk	Nissan 370Z General Discussions	15	11-01-2010 08:23 PM
Racing in Slow Motion	MightyBobo	The Lounge (Off Topic)	2	12-17-2009 03:27 PM
IIHS Small Car Test: Three Gruesome Slow-Motion Crash Videos	AK370Z	Other Vehicles	13	04-15-2009 09:42 AM