took the plunge ordered JUN Cams

Speedy · 03-14-2012, 02:42 PM

Quote:

Originally Posted by 370Z JT

I'm more worried about reliability. Are aftermarket camshfts pretty safe?

It's not the cam itself you have to worry about. It's the valve springs and retainers / push rods. The cam works by opening the valve more, putting more stress on the valve train.

I haven't looked in to this VQ motor enough yet to know how the valve train is laid out, but when I did the cam in my Challenger we did upgraded valve springs, retainers, and locks.

Mark Gomez · 03-14-2012, 02:43 PM

Cant wait to see the results!

HKYStormFront · 03-14-2012, 02:47 PM

definitely in to hear results. good luck!!

nismonster · 03-14-2012, 03:06 PM

awesome! sub'd

Red__Zed · 03-14-2012, 03:19 PM

Quote:

Originally Posted by Speedy

It's not the cam itself you have to worry about. It's the valve springs and retainers / push rods. The cam works by opening the valve more, putting more stress on the valve train.

I haven't looked in to this VQ motor enough yet to know how the valve train is laid out, but when I did the cam in my Challenger we did upgraded valve springs, retainers, and locks.

Which is the right way to do this, but those of us advocating that path were not taken into account.

zuperman 370 · 03-14-2012, 03:21 PM

I asked jun personally and they told me that springs and internals do not have to be changed for them cams they can even run on stock ecu due to the cams not being too aggressive, you should worry about springs etc if the cams are aggressive

Jamaica · 03-14-2012, 03:23 PM

Have the responded when is the intended shipping date?

phelan · 03-14-2012, 03:24 PM

I don't care what the maker says half the time, I'd do what I feel most comfortable doing, and if I were in your shoes, I'd upgrade all of the connecting hardware just for that little extra piece of mind. Last thing you need is all the added stress to the valvetrain wrecking the engine somehow.

On the flipside, any company saying "oh you can use (x) engine mod without retuning, it's safe for stock no problem" can't possibly be getting massive gains....I think there is more needed than just the cam shafts, but what do I know?

Red__Zed · 03-14-2012, 03:29 PM

Quote:

Originally Posted by zuperman 370

I asked jun personally and they told me that springs and internals do not have to be changed for them cams they can even run on stock ecu due to the cams not being too aggressive, you should worry about springs etc if the cams are aggressive

If they are aggressive enough to gain power, you will need support.

Even if they aren't that aggressive, it is wise to add support.

Asking the seller is not sufficient. They want to sell cams. They are not concerned about your long term reliability.

zuperman 370 · 03-14-2012, 03:35 PM

What support mods do you guys recommend? And where can I purchase them from?

Speedy · 03-14-2012, 03:55 PM

Quote:

Originally Posted by Red__Zed

If they are aggressive enough to gain power, you will need support.

That's the rub. If they're not aggressive enough to need support, then they can't be aggressive enough to add any power.

RSZED · 04-20-2012, 02:40 PM

Any news results?? i really would love to buy these if they show any real gains?

DarkJak · 04-20-2012, 04:34 PM

JUN exhaust cam shaft finally arrived

^Here

Just a matter of time before the results come.

newtothe370 · 09-01-2014, 05:01 PM

where are the results?!?!

6MT-Z34 · 09-01-2014, 05:26 PM

I think he ended up selling them due to not finding shops that could install these or tune them

03-14-2012, 02:43 PM	#62 (permalink)
Mark Gomez Base Member Join Date: Mar 2011 Location: Dallas, Texas Age: 55 Posts: 57 Drives: 2010 370Z 40th Anniv Rep Power: 14	Cant wait to see the results! __________________ Fast Intentions 18" Resonators SS Catback Exhaust - Fast Intentions High Flow Cats - HPS Intake Tubes - K&N Drop In Filters - Xpel Clear bra - Z1 Motorsports Wheel Spacers 15mm Front 20mm Rear - Huper Optik Tint 30% - Kenwood DNX6980 NAV/DVD/Backup Camera

03-14-2012, 02:47 PM	#63 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	definitely in to hear results. good luck!! __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

03-14-2012, 03:06 PM	#64 (permalink)
nismonster Base Member Join Date: Jun 2011 Location: Marietta, GA Posts: 177 Drives: 09 NISMO #349 Rep Power: 13	awesome! sub'd __________________ SOLD 2009 MB Nismo # 349 \| Persimmon Touring Interior \| Whiteline Diff Bushings \| ZSpeed HD CSC \| SPL Rear Camber Links\| Michelin AS3 \| WickedCAS \| JL 13tw5-3 \| JL JX1000.1 \| Pioneer AVIC-X910BT

03-14-2012, 03:24 PM	#68 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	I don't care what the maker says half the time, I'd do what I feel most comfortable doing, and if I were in your shoes, I'd upgrade all of the connecting hardware just for that little extra piece of mind. Last thing you need is all the added stress to the valvetrain wrecking the engine somehow. On the flipside, any company saying "oh you can use (x) engine mod without retuning, it's safe for stock no problem" can't possibly be getting massive gains....I think there is more needed than just the cam shafts, but what do I know? __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
a few questions before I take the plunge!	f00d4tehg0dz	Nissan 370Z General Discussions	18	12-28-2011 07:42 PM
About to take the Forgestar plunge	cubarican84	Wheels & Tires	9	04-07-2011 07:24 AM
Almost ready to take the plunge...	6MT	Canada	35	03-03-2010 11:50 AM
Took The Plunge	Bada Bing	New 370Z Owner	9	12-11-2009 03:13 PM
Took the plunge	bryguycbr	New 370Z Owner	7	03-01-2009 10:00 AM

03-14-2012, 03:21 PM	#66 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	I asked jun personally and they told me that springs and internals do not have to be changed for them cams they can even run on stock ecu due to the cams not being too aggressive, you should worry about springs etc if the cams are aggressive

03-14-2012, 03:23 PM	#67 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Have the responded when is the intended shipping date?

03-14-2012, 03:35 PM	#70 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	What support mods do you guys recommend? And where can I purchase them from?

04-20-2012, 02:40 PM	#72 (permalink)
RSZED Base Member Join Date: Mar 2012 Location: Long Beach Posts: 16 Drives: 11 Nissan 370Z BC M6 Rep Power: 13	Any news results?? i really would love to buy these if they show any real gains?

04-20-2012, 04:34 PM	#73 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,390 Drives: 2009 370Z Rep Power: 13448	JUN exhaust cam shaft finally arrived ^Here Just a matter of time before the results come.

09-01-2014, 05:01 PM	#74 (permalink)
newtothe370 Base Member Join Date: Jul 2014 Location: los angeles, cali Posts: 11 Drives: a golf cart Rep Power: 10	where are the results?!?!

09-01-2014, 05:26 PM	#75 (permalink)
6MT-Z34 A True Z Fanatic Join Date: Jan 2013 Location: NJ Posts: 1,726 Drives: PW Z Rep Power: 15	I think he ended up selling them due to not finding shops that could install these or tune them