|
I dont think anything bigger is going to the fit the Greddy manifolds. My 20gs are within MM of the chassis! A car with good motor mounts and flex sections
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
10-08-2014, 12:33 PM
|
#11 (permalink) |
|
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,669
Drives: 370
Rep Power: 974725   |
I dont think anything bigger is going to the fit the Greddy manifolds. My 20gs are within MM of the chassis! A car with good motor mounts and flex sections in the exhaust shouldnt need any supports for the turbos, unless the turbo is mounted away from the cylinder heads.
We will just make some exhaust manifolds like we did for Justin's 350z. I am currently looking at the HTA3582s.
__________________
Last edited by phunk; 10-08-2014 at 12:41 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Steering lock problem solved (for real) | Baer383 | Nissan 370Z General Discussions | 948 | 05-11-2026 07:15 PM |
| Nav Problem Solved!!! | JohnsZ | Audio & Video | 38 | 06-13-2013 11:35 AM |
| Got My z fixed! Problem solved!!! | John08 | Nismo 370Z | 7 | 08-05-2012 08:51 AM |
| Fuel Starvation Problem Solved? | ResIpsa | Track / Autocross / Drifting / Dragstrip | 7 | 03-01-2012 05:50 PM |
| Rear hatch release problem solved! | BluZ | Australia/New Zealand | 8 | 05-22-2010 01:42 AM |
270Likes
Threaded Mode
