Real Auto Dynamics built and R/T tuned built motor TT

Mr.Squeeze · 11-07-2012, 05:00 PM

Quote:

Originally Posted by fuct

SICK MAN! how many pounds are you running on a day to day basis, ie. which one do you feel safest using?

Low Boost 14 PSI is more than enough in this cold North east weather right now.

elperuano · 11-07-2012, 06:15 PM

Congrats man, that exhaust really opened up the ponies! I hope to follow this path one day!

Nixlimited · 11-07-2012, 06:25 PM

Quote:

Originally Posted by Mr.Squeeze

Yes I have the HKS EVC S boost controller.

You have probably answered this already, but are you using custom gauges, and if so what kind? I have been looking at Defi Racer (because I think 52mm is what fits best) and the PLX gauges. Just noticed the newer PLX do not have the outer ring of LEDs, which is kind of a bummer.

Edit: sorry, just saw the gauges on the first page of the thread. Any advice on install in factory location?

Mr.Squeeze · 11-08-2012, 01:18 AM

Quote:

Originally Posted by Nixlimited

You have probably answered this already, but are you using custom gauges, and if so what kind? I have been looking at Defi Racer (because I think 52mm is what fits best) and the PLX gauges. Just noticed the newer PLX do not have the outer ring of LEDs, which is kind of a bummer.

Edit: sorry, just saw the gauges on the first page of the thread. Any advice on install in factory location?

I have a few pictures that I took during the process that I will put up once I make my thread in the members gallery. I will say this much you need a dremel to make the Def'si fit, I also used black black silicone for a tight fit.

Nixlimited · 11-08-2012, 09:05 AM

Quote:

Originally Posted by Mr.Squeeze

I have a few pictures that I took during the process that I will put up once I make my thread in the members gallery. I will say this much you need a dremel to make the Difi fit, I also used black black silicone for a tight fit.

Cool. Did you use the Defi Racer gauges?

Mr.Squeeze · 11-08-2012, 10:17 AM

Quote:

Originally Posted by Nixlimited

Cool. Did you use the Defi Racer gauges?

Yes I have the 52mm Racer gauges.

Nixlimited · 11-08-2012, 11:31 AM

Quote:

Originally Posted by Mr.Squeeze

Yes I have the 52mm Racer gauges.

Where did you tap oil temp and pressure? I am getting ready to do a radiator swap and to add an oil cooler and I am trying to plan out the system and connections. Do any sandwich plate adapters include ports for those?

Blaizon · 11-08-2012, 11:33 AM

Sick looking graphs Cliff! I can't imagine how the car feels now...once I get my twins I can't wait to run you to see how bad of a whoopin you put on me

elperuano · 11-08-2012, 12:30 PM

^lol his low boost setting is higher than my max but the numbers respond with what I'm runnin on 12 lbs (the only setting I use lol). Too bad ur not In south Florida I'd love to see this machine! How long was the downtime when u went with the built motor?

Mr.Squeeze · 11-08-2012, 07:49 PM

Quote:

Originally Posted by Blaizon

Sick looking graphs Cliff! I can't imagine how the car feels now...once I get my twins I can't wait to run you to see how bad of a whoopin you put on me

I cant wait for you to pull the trigger man and get the twins.

Quote:

Originally Posted by elperuano

^lol his low boost setting is higher than my max but the numbers respond with what I'm runnin on 12 lbs (the only setting I use lol). Too bad ur not In south Florida I'd love to see this machine! How long was the downtime when u went with the built motor?

The engine was built last year took 3-4 month's for it to get built, I had to wait for my custom piston's that took 8 weeks to come during that time also.

Mr.Squeeze · 02-10-2013, 05:56 PM

Quote:

Originally Posted by Nixlimited

Where did you tap oil temp and pressure? I am getting ready to do a radiator swap and to add an oil cooler and I am trying to plan out the system and connections. Do any sandwich plate adapters include ports for those?

Just Saw my fault for being month's late on the reply I used the stock location ran a T off of it .

Baer383 · 02-10-2013, 06:54 PM

Quote:

Originally Posted by Nixlimited

Where did you tap oil temp and pressure? I am getting ready to do a radiator swap and to add an oil cooler and I am trying to plan out the system and connections. Do any sandwich plate adapters include ports for those?

I used this very easy and a great solution.

Derale Performance Inline Fan Thermostats 35021 - SummitRacing.com

Nixlimited · 02-10-2013, 08:10 PM

Thank you both.

swiss370Z · 02-17-2013, 10:09 AM

Quote:

Originally Posted by Mr.Squeeze

Hey Mr.Squeeze

I can not get enough from this dyno pull!

Absolutely incredible
Looks and sounds as if the booth collapses from the performance!

Really Impressive!
Well done

Greetings from Switzerland

Mr.Squeeze · 02-20-2013, 04:18 PM

Quote:

Originally Posted by swiss370Z

Hey Mr.Squeeze

I can not get enough from this dyno pull!

Absolutely incredible
Looks and sounds as if the booth collapses from the performance!

Really Impressive!
Well done

Greetings from Switzerland

Thanks

11-08-2012, 11:33 AM	#68 (permalink)
Blaizon Base Member Join Date: Feb 2010 Location: North Jersey Posts: 17 Drives: E92 Rep Power: 15	Sick looking graphs Cliff! I can't imagine how the car feels now...once I get my twins I can't wait to run you to see how bad of a whoopin you put on me __________________ Single Turbo E92 07 Montego Blue 335i 6AT E90

02-10-2013, 08:10 PM	#73 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 25	Thank you both. __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
◙◙◙ AMSOIL Synthetic Motor Oil \| Real Auto Dynamics ◙◙◙	Kevin@RAD	Drivetrain/Engine	151	01-24-2014 02:26 PM
Liberty VIP at Real Auto Dynamics	Kevin@RAD	Nissan 370Z Photos / Spyshots / Video / Media Gallery	3	08-14-2012 12:03 PM
Anyone have a built motor yet for FI?	GambitX	Forced Induction	61	08-22-2011 09:44 AM
built motor?	toner123	Forced Induction	45	03-23-2011 05:53 PM
09 6 speed 370z Twin Turbo, Built motor. BIG PROB!!	soaka1	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	19	03-07-2011 04:34 PM

11-07-2012, 06:15 PM	#62 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	Congrats man, that exhaust really opened up the ponies! I hope to follow this path one day!

11-08-2012, 12:30 PM	#69 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	^lol his low boost setting is higher than my max but the numbers respond with what I'm runnin on 12 lbs (the only setting I use lol). Too bad ur not In south Florida I'd love to see this machine! How long was the downtime when u went with the built motor?