Boosted Performance single turbo build

jwick · 09-21-2014, 01:32 PM

Mine blows a little smoke after letting the throttle off after WOT.

Zerocool · 06-15-2015, 03:27 PM

this single turbo kits seems perrrrrrrrrrrrrrfect for my needs. I'm worried about blowing my engine up with twin turbo and too much boost on a stock block. Single should suit my needs.

so many pages to go through but what is the final price? if someone could be nice enough to tell me

Cell · 06-15-2015, 03:40 PM

Quote:

Originally Posted by Zerocool

this single turbo kits seems perrrrrrrrrrrrrrfect for my needs. I'm worried about blowing my engine up with twin turbo and too much boost on a stock block. Single should suit my needs.

so many pages to go through but what is the final price? if someone could be nice enough to tell me

Single, twin, tri-turbo, supercharger doesnt make a difference when it comes to blowing up your engine. get a good tuner and tune it on the safe side and your chances of blowing your engine is a lot lower. Guys on here have blown their engines with superchargers too.

Ill · 06-15-2015, 03:40 PM

$7,150 for the turn key according to his signature.

Not including the highly recommended supporting mods. I can roughly guess about $10,000, on the low end, not including install cost.

Cell · 06-15-2015, 03:42 PM

Quote:

Originally Posted by Ill

$7,150 for the turn key according to his signature.

Not including the highly recommended supporting mods. I can roughly guess about $10,000, on the low end, not including install cost.

If you install your own clutch, gauges, boost controller and do your own custom mounts, I would expect around 11-12k. I was a bit over 12k doing my own install and having someone else install the clutch/flywheel and making a custom gauge mount.

jwick · 06-15-2015, 04:39 PM

Quote:

Originally Posted by Cell

If you install your own clutch, gauges, boost controller and do your own custom mounts, I would expect around 11-12k. I was a bit over 12k doing my own install and having someone else install the clutch/flywheel and making a custom gauge mount.

Same boat

overtureZ · 01-18-2016, 07:51 PM

How much does the single turbo kit run?

PongSanity · 01-18-2016, 08:22 PM

Quote:

Originally Posted by overtureZ

How much does the single turbo kit run?

Turn key is $7300. Everything is in the very first post of this this thread....

Sent from my iPhone using Tapatalk

jwick · 01-18-2016, 08:44 PM

Quote:

Originally Posted by overtureZ

How much does the single turbo kit run?

Go check out the BP V2.0 Round 3 thread in this section for all details.

Spec Jay · 02-11-2016, 06:59 PM

So... just noticed something while I was underneath the car. How are you guys doing transmission oil changes? the manifold makes the clearances really right to get to the fill port.

zguynate · 02-11-2016, 08:34 PM

I did mine before I put the kit on. I'm assuming you will need to pull the manifold to do it, which really isn't that bad after you've done it a few times lol.

jwick · 02-11-2016, 10:17 PM

Quote:

Originally Posted by dragonbreath

I did mine before I put the kit on. I'm assuming you will need to pull the manifold to do it, which really isn't that bad after you've done it a few times lol.

^^this^^

Spec Jay · 02-12-2016, 09:21 AM

I was hoping for a different answer lol I think I'm gonna install Jiffy Tite quick release fittings when I do.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Boosted Performance · 02-12-2016, 11:25 AM

There should be enough room to get a round end allen-wrench in there to loosen the fill bolt....

http://images.wisegeek.com/ball-end-allen-wrenches.jpg

A few customers have had success using these.

jwick · 02-12-2016, 12:00 PM

My crossover piping is basically hard up against the fill plug. Only way to change is to drop the piping.

09-21-2014, 01:32 PM	#1 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465058	Mine blows a little smoke after letting the throttle off after WOT. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

06-15-2015, 03:27 PM	#2 (permalink)
Zerocool Track Member Join Date: Mar 2014 Location: N.Y Posts: 548 Drives: '09 370z Rep Power: 17	this single turbo kits seems perrrrrrrrrrrrrrfect for my needs. I'm worried about blowing my engine up with twin turbo and too much boost on a stock block. Single should suit my needs. so many pages to go through but what is the final price? if someone could be nice enough to tell me __________________ I like pizza

06-15-2015, 03:40 PM	#4 (permalink)
Ill Base Member Join Date: Mar 2012 Location: Bellevue Posts: 177 Drives: 09 370z Base 6MT Rep Power: 15	$7,150 for the turn key according to his signature. Not including the highly recommended supporting mods. I can roughly guess about $10,000, on the low end, not including install cost. __________________ Old - GTM TT Stage 1 - 487whp / 415wtrq - bunch of goodies. New - 2011 Shelby GT500 - 2.3L VMP TVS - JLT CAI.

02-11-2016, 06:59 PM	#10 (permalink)
Spec Jay A True Z Fanatic Join Date: Apr 2009 Location: Bummerton Posts: 1,510 Drives: MtB 09 370z Rep Power: 21	So... just noticed something while I was underneath the car. How are you guys doing transmission oil changes? the manifold makes the clearances really right to get to the fill port. __________________ 09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay

02-11-2016, 08:34 PM	#11 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 75	I did mine before I put the kit on. I'm assuming you will need to pull the manifold to do it, which really isn't that bad after you've done it a few times lol. __________________ 2009 370z touring w/sports package

01-18-2016, 07:51 PM	#7 (permalink)
overtureZ Enthusiast Member Join Date: Dec 2015 Location: Middle TN Age: 32 Posts: 319 Drives: Da Boosted Z Rep Power: 11	How much does the single turbo kit run?

02-12-2016, 09:21 AM	#13 (permalink)
Spec Jay A True Z Fanatic Join Date: Apr 2009 Location: Bummerton Posts: 1,510 Drives: MtB 09 370z Rep Power: 21	I was hoping for a different answer lol I think I'm gonna install Jiffy Tite quick release fittings when I do. Sent from my SAMSUNG-SGH-I747 using Tapatalk __________________ 09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay

02-12-2016, 11:25 AM	#14 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3384	There should be enough room to get a round end allen-wrench in there to loosen the fill bolt.... http://images.wisegeek.com/ball-end-allen-wrenches.jpg A few customers have had success using these. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

02-12-2016, 12:00 PM	#15 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465058	My crossover piping is basically hard up against the fill plug. Only way to change is to drop the piping. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
STS 370Z Single Turbo System	STSTurbo.com	Forced Induction	337	11-21-2012 10:55 AM
Question about a single turbo set up?	dnasty370z	Forced Induction	8	07-26-2012 10:56 AM
New Single Turbo Option.. yes please	Isamu	Forced Induction	108	05-09-2012 08:07 AM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 04:03 PM