Topgunz - air to air upgrade

StillenZ84 · 06-19-2017, 05:35 PM

Would def check the sizes. My silver pulley was the 8 psi and measured 3.12. My 9 psi was black and measured 2.75 or around there. I went from 8.5 psi with the 8 psi pulley to a little over 10 with the 9 psi.

Quote:

Originally Posted by BOLIO 671

Here's the 8psi pulley that came with my Stillen kit...has a bluish color....was everyone else's silver?

Here's the (Silver) 9lb pulley that I got from Stillen ......

brucelidat · 06-19-2017, 05:48 PM

Topgunz, any update on how your SC kit is going?

BOLIO 671 · 06-19-2017, 09:52 PM

Quote:

Originally Posted by StillenZ84

Would def check the sizes. My silver pulley was the 8 psi and measured 3.12. My 9 psi was black and measured 2.75 or around there. I went from 8.5 psi with the 8 psi pulley to a little over 10 with the 9 psi.

Well my boost did increase between the 2 pulleys...with the Bluish pulley I was pushing about 7.8 psi.... just shy of 8psi.....Stillen said this was caused by me running TP'S and having no cats (back pressure theory) so they sent me the 9b pulley and my car has been pushing 9~9psi on it .

TopgunZ · 06-20-2017, 07:53 AM

Quote:

Originally Posted by BOLIO 671

Well my boost did increase between the 2 pulleys...with the Bluish pulley I was pushing about 7.8 psi.... just shy of 8psi.....Stillen said this was caused by me running TP'S and having no cats (back pressure theory) so they sent me the 9b pulley and my car has been pushing 9~9psi on it .

Did you do a straight swap and retune or was it done all at the same time as when you put the A2A kit on?

TopgunZ · 06-20-2017, 07:55 AM

Quote:

Originally Posted by brucelidat

Topgunz, any update on how your SC kit is going?

Slower than I wanted (story of our lives). My summer has been crazy!

TBatt · 06-20-2017, 08:31 AM

My 8psi pulley is silver and most that I have seen on the forum are silver (bare aluminum). The color is just a coating (anodizing) and should not effect performance. The "high traction" pulleys are often bead blasted for a more aggressive "bite" of the belt surface. I'm not sure how effective this treatment is over time.

One thing that I have noticed on the micro-v belts is that the ribs are fairly wide compared to the pulley groove. As the belt is put under tension the ribs are pulled into the grooves (standard V belt workings) and increase the surface area/traction. They do reach a limit when the force is greater than the traction. You gotta remember that a SC is drawing somewhere between 50 and 70 hp to create the boost we so love.

ChaseZ · 06-20-2017, 09:25 AM

I didn't realize the 'high traction' pulleys were just bead blasted. Thought it was a coating for some reason. Heck I've got a bead blasting cabinet in the garage so can make all the high traction I want lol

BOLIO 671 · 06-20-2017, 09:39 AM

Quote:

Originally Posted by TopgunZ

Did you do a straight swap and retune or was it done all at the same time as when you put the A2A kit on?

Nah....I got the 9psi pulley swap early on when I first purchased and installed my Stillen kit a few years ago....when the Air 2 Air Kit was nothing more than a discussion of this forum....It's been tuned by Seb since then with all the upgrades since that time...including the A2A...car is still producing 9~9.5 psi right now but feels sooooo much better on the A2A kit.

I'm getting belt slip.which Never happened on the the Stillen Kit....which is why I'm gonna install the Idler Pulley Kit from TBatt

370Zsteve · 06-20-2017, 09:35 PM

You'd think it would not be a problem considering the extra room vs the OEM fascia but it does incorporate a different windshield washer fluid reservoir so who knows. Just covering all the bases.

Optimiser · 06-21-2017, 01:41 AM

Quote:

Originally Posted by ChaseZ

I didn't realize the 'high traction' pulleys were just bead blasted. Thought it was a coating for some reason. Heck I've got a bead blasting cabinet in the garage so can make all the high traction I want lol

I believe they have a coating.

acorona370 · 06-22-2017, 07:50 AM

Hey guys with stillen and conceptZ discontinuing the 9lb pulley. Can someone upload a link where i can purchase one. Dont want to buy the wrong one.

BOLIO 671 · 06-27-2017, 12:35 AM

Quote:

Originally Posted by acorona370

Hey guys with stillen and conceptZ discontinuing the 9lb pulley. Can someone upload a link where i can purchase one. Dont want to buy the wrong one.

Wow....Really??? They're discontinuing?

lj909 · 07-01-2017, 01:33 AM

Quote:

Originally Posted by TopgunZ

Boom

Any way around cutting this?

MoulaZ · 07-01-2017, 04:39 AM

Quote:

Originally Posted by lj909

Any way around cutting this?

Yeah. Different A2A kit maybe? lol.

turtle64b · 07-01-2017, 06:46 AM

^^^What he said.

It's not difficult. you can sand it and get some paint to make it look almost stock. I don't have a picture, but I used Rustoleum Gloss black, I believe, and it looks the same. I also used a Dremmel with the metal cutting wheel. It took 3 wheels to do the job lol.

06-19-2017, 05:48 PM	#1847 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	Topgunz, any update on how your SC kit is going? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

06-20-2017, 08:31 AM	#1851 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20169	My 8psi pulley is silver and most that I have seen on the forum are silver (bare aluminum). The color is just a coating (anodizing) and should not effect performance. The "high traction" pulleys are often bead blasted for a more aggressive "bite" of the belt surface. I'm not sure how effective this treatment is over time. One thing that I have noticed on the micro-v belts is that the ribs are fairly wide compared to the pulley groove. As the belt is put under tension the ribs are pulled into the grooves (standard V belt workings) and increase the surface area/traction. They do reach a limit when the force is greater than the traction. You gotta remember that a SC is drawing somewhere between 50 and 70 hp to create the boost we so love. 370Zsteve likes this. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

06-20-2017, 09:25 AM	#1852 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94684	I didn't realize the 'high traction' pulleys were just bead blasted. Thought it was a coating for some reason. Heck I've got a bead blasting cabinet in the garage so can make all the high traction I want lol 370Zsteve likes this.

06-20-2017, 09:35 PM	#1854 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 43	Anyone running this with the Stillen front fascia? You'd think it would not be a problem considering the extra room vs the OEM fascia but it does incorporate a different windshield washer fluid reservoir so who knows. Just covering all the bases. __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM

06-22-2017, 07:50 AM	#1856 (permalink)
acorona370 Base Member Join Date: May 2016 Location: Schaumburg Posts: 62 Drives: 370Z Nismo 2014 Rep Power: 10	Hey guys with stillen and conceptZ discontinuing the 9lb pulley. Can someone upload a link where i can purchase one. Dont want to buy the wrong one.

07-01-2017, 06:46 AM	#1860 (permalink)
turtle64b Track Member Join Date: Jun 2015 Location: Granbury, TX Posts: 550 Drives: '11 SC Blue 7AT Rep Power: 3366	^^^What he said. It's not difficult. you can sand it and get some paint to make it look almost stock. I don't have a picture, but I used Rustoleum Gloss black, I believe, and it looks the same. I also used a Dremmel with the metal cutting wheel. It took 3 wheels to do the job lol.