Topgunz - air to air upgrade

Optimiser · 08-28-2016, 09:36 PM

Are the intercooler dimensions of 20" X 15.25" X 3.50" for the Air to Air setup just for the core only, or do they include the tanks top and bottom? I can't quite tell from the pics.
Thanks.

wideglideleon · 08-29-2016, 05:30 PM

I am about to install the Stillen SC and Topgunz's A2A upgrade kit.
I have the Stillen G3 intake, they were already installed when I bought my Z.
Question what are you guys using to trim/cut the radiator
Support with. I understand it will need this for the intercooler tubes to pass thru.
I want to have all the tools ready when my kit arrives.

Thanks

Jayhovah · 08-29-2016, 06:40 PM

Quote:

Originally Posted by wideglideleon

I am about to install the Stillen SC and Topgunz's A2A upgrade kit.
I have the Stillen G3 intake, they were already installed when I bought my Z.
Question what are you guys using to trim/cut the radiator
Support with. I understand it will need this for the intercooler tubes to pass thru.
I want to have all the tools ready when my kit arrives.

Thanks

I used a dremel... The support is pretty flimsy plastic.

Sent from my Nexus 6 using Tapatalk

SlyZGuy · 08-29-2016, 10:42 PM

Mines on and going on dyno tomorrow!!!

TBatt · 08-30-2016, 10:38 AM

Quote:

Originally Posted by wideglideleon

I am about to install the Stillen SC and Topgunz's A2A upgrade kit.
I have the Stillen G3 intake, they were already installed when I bought my Z.
Question what are you guys using to trim/cut the radiator
Support with. I understand it will need this for the intercooler tubes to pass thru.
I want to have all the tools ready when my kit arrives.

Thanks

I used a pair of channel locks and just tore the plastic apart. It is really pretty soft and easy to work with.

wideglideleon · 08-30-2016, 11:38 AM

I guess the Godzilla approach has its merits. I am going for as clean of an install as possible, but thanks. Going to use a Dremel tool I have decided.

TopgunZ · 08-30-2016, 07:14 AM

Quote:

Originally Posted by Optimiser

Are the intercooler dimensions of 20" X 15.25" X 3.50" for the Air to Air setup just for the core only, or do they include the tanks top and bottom? I can't quite tell from the pics.
Thanks.

Overall Size 20" X 15.25" X 3.50"
Core Size 18.48 X 9.00 X 3.50

Optimiser · 08-31-2016, 01:02 AM

Quote:

Originally Posted by TopgunZ

Overall Size 20" X 15.25" X 3.50"
Core Size 18.48 X 9.00 X 3.50

Thanks for that TopgunZ.

08-29-2016, 05:30 PM	#2 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64087	I am about to install the Stillen SC and Topgunz's A2A upgrade kit. I have the Stillen G3 intake, they were already installed when I bought my Z. Question what are you guys using to trim/cut the radiator Support with. I understand it will need this for the intercooler tubes to pass thru. I want to have all the tools ready when my kit arrives. Thanks Last edited by wideglideleon; 08-29-2016 at 05:34 PM.

08-29-2016, 10:42 PM	#4 (permalink)
SlyZGuy Base Member Join Date: Jan 2016 Location: Maryland Posts: 220 Drives: 2014 370z S/C M6 Rep Power: 11	Mines on and going on dyno tomorrow!!! __________________ Stillen S/C \| '15 Nismo Conversion \| Aodhan \| Eibach \| Tokico \| SPC \| Z1 \| Evo-R \| Aerojacket \| HKS \| Berk \| CFE \| APR \| Amuse \| Z1 \| A2A IC \| AAM \| Buddy Club \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM

08-28-2016, 09:36 PM	#1 (permalink)
Optimiser Enthusiast Member Join Date: Mar 2013 Location: Australia Posts: 457 Drives: 2012 Nissan 370Z MT Rep Power: 20146	Are the intercooler dimensions of 20" X 15.25" X 3.50" for the Air to Air setup just for the core only, or do they include the tanks top and bottom? I can't quite tell from the pics. Thanks.

08-30-2016, 11:38 AM	#6 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64087	I guess the Godzilla approach has its merits. I am going for as clean of an install as possible, but thanks. Going to use a Dremel tool I have decided.