![]() |
I havent heard of this issue. However, those tubes bend like butter and it would not hurt them to move them around. Also, there is a lot of information out
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
![]() |
#1 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6835 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I havent heard of this issue. However, those tubes bend like butter and it would not hurt them to move them around.
Also, there is a lot of information out there on deleting the throttle body coolant all together. That is what I did.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
![]() |
![]() |
![]() |
#2 (permalink) | |
A True Z Fanatic
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465057 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Mine are gone too. I was going to mention that and then I saw he lived in PA. We don’t worry about freezing temps in Texas, so no reason to run the coolant thru the TBs. |
|
![]() |
![]() |
![]() |
#3 (permalink) |
Base Member
![]() Join Date: Sep 2013
Location: pittsburgh
Posts: 106
Drives: '14 Z Sport Tour 6M
Rep Power: 3367 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Thanks guys. I rarely, if ever, drive the car in freezing temps, so I think I'll go ahead & bypass them. No sense adding any unnecessary heat to the incoming air, anyway!
__________________
TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4 |
![]() |
![]() |
![]() |
#4 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6835 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Just make sure you take a look on how to do it or you will have coolant spraying out at a rapid pace.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
![]() |
![]() |
![]() |
#5 (permalink) | |
A True Z Fanatic
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465057 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Yup and it’s a pita to get a rubber fitting on the backside between the block and the firewall. Edit - the rubber cap is difficult but the zip tie to hold it on is the real pita. Last edited by jwick; 01-03-2019 at 03:23 PM. |
|
![]() |
![]() |
![]() |
#6 (permalink) |
Base Member
![]() Join Date: Sep 2013
Location: pittsburgh
Posts: 106
Drives: '14 Z Sport Tour 6M
Rep Power: 3367 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
So I took a slightly different route. I simply used the existing hose (C) from the back of the engine & rotated it from the right side of the engine to the left side & connected it to the return nipple on the hard heater line (E). Alternatively, I was going to plug both nipples, but this has fewer points of potential failure. PLUS - I didn't have to mess w/ getting a clamp on that nipple between the block & the firewall!
__________________
TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4 |
![]() |
![]() |
![]() |
#7 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6835 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Those are great numbers! How is everything working with the gate?
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
![]() |
![]() |
![]() |
#8 (permalink) |
A True Z Fanatic
Join Date: Apr 2017
Location: So. Commiefornia
Posts: 6,381
Drives: 2014 Nismo Gunmetal
Rep Power: 2684375 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
It couldn't have worked out better.
__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 750whp/700ft.lbs |
![]() |
![]() |
![]() |
#10 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6835 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Show 1 piece of data to support that...I'm on board.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
![]() |
![]() |
![]() |
#12 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6835 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
At the moment, it only fits the coupe. However, I'm getting the sedan kit going. Should be ready in a few weeks.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
![]() |
![]() |
![]() |
#14 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6835 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Your all good then. PM me if you have any questions.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
![]() |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-09-2015 11:59 PM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 05:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 02:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 07:00 AM |