Topgunz - air to air upgrade

nic370 · 08-29-2016, 09:36 AM

So I just removed the cooler out of the manifold in preparation for going a2a
Took the bolts out pulled hard and it slid right out in one hit
My manifold is off the car at the moment

Sent from my SM-G920F using Tapatalk

wideglideleon · 08-29-2016, 05:30 PM

I am about to install the Stillen SC and Topgunz's A2A upgrade kit.
I have the Stillen G3 intake, they were already installed when I bought my Z.
Question what are you guys using to trim/cut the radiator
Support with. I understand it will need this for the intercooler tubes to pass thru.
I want to have all the tools ready when my kit arrives.

Thanks

Jayhovah · 08-29-2016, 06:40 PM

Quote:

Originally Posted by wideglideleon

I am about to install the Stillen SC and Topgunz's A2A upgrade kit.
I have the Stillen G3 intake, they were already installed when I bought my Z.
Question what are you guys using to trim/cut the radiator
Support with. I understand it will need this for the intercooler tubes to pass thru.
I want to have all the tools ready when my kit arrives.

Thanks

I used a dremel... The support is pretty flimsy plastic.

Sent from my Nexus 6 using Tapatalk

SlyZGuy · 08-29-2016, 10:42 PM

Mines on and going on dyno tomorrow!!!

TopgunZ · 08-30-2016, 07:12 AM

Install looks great! The shop that did it called me and had just one question. It was in regards to the washer reservoir neck hitting the Y pipe. I walked them through that. Other than that they told me the install was very straight forward, easy and everything fit up perfectly!

Love how the Tial lets you select a color and those colors match the 370 family.

Good luck on the Dyno tomorrow! What are you mods other than the A2A kit?

TopgunZ · 08-30-2016, 07:14 AM

Quote:

Originally Posted by Optimiser

Are the intercooler dimensions of 20" X 15.25" X 3.50" for the Air to Air setup just for the core only, or do they include the tanks top and bottom? I can't quite tell from the pics.
Thanks.

Overall Size 20" X 15.25" X 3.50"
Core Size 18.48 X 9.00 X 3.50

TBatt · 08-30-2016, 10:38 AM

Quote:

Originally Posted by wideglideleon

I am about to install the Stillen SC and Topgunz's A2A upgrade kit.
I have the Stillen G3 intake, they were already installed when I bought my Z.
Question what are you guys using to trim/cut the radiator
Support with. I understand it will need this for the intercooler tubes to pass thru.
I want to have all the tools ready when my kit arrives.

Thanks

I used a pair of channel locks and just tore the plastic apart. It is really pretty soft and easy to work with.

wideglideleon · 08-30-2016, 11:38 AM

I guess the Godzilla approach has its merits. I am going for as clean of an install as possible, but thanks. Going to use a Dremel tool I have decided.

SlyZGuy · 08-30-2016, 01:12 PM

Quote:

Originally Posted by TopgunZ

Install looks great! The shop that did it called me and had just one question. It was in regards to the washer reservoir neck hitting the Y pipe. I walked them through that. Other than that they told me the install was very straight forward, easy and everything fit up perfectly!

Love how the Tial lets you select a color and those colors match the 370 family.

Good luck on the Dyno tomorrow! What are you mods other than the A2A kit?

They were able to use a silicon flex pipe to solve the reservoir neck.

Other upgrades are:

850cc injectos
9lb pulley
Vortech upgraded impeller
AAM oil cooler
Berk HFC
HKS hi-flow exhaust

TopGunz - what do you estimate WHP to be? I dyno'd 449 at the wheels without a2a,and impeller on 650cc injectors

And thx, yes the blue TIAL BOV goes perfectly!

TopgunZ · 08-30-2016, 02:01 PM

Are you on EcuTech with the 4bar map sensor?

Quote:

Originally Posted by SlyZGuy

They were able to use a silicon flex pipe to solve the reservoir neck.

Other upgrades are:

850cc injectos
9lb pulley
Vortech upgraded impeller
AAM oil cooler
Berk HFC
HKS hi-flow exhaust

TopGunz - what do you estimate WHP to be? I dyno'd 449 at the wheels without a2a,and impeller on 650cc injectors

And thx, yes the blue TIAL BOV goes perfectly!

TBatt · 08-30-2016, 03:24 PM

Quote:

Originally Posted by SlyZGuy

They were able to use a silicon flex pipe to solve the reservoir neck.

Hey, that was my idea! At least now I know it will work.

Optimiser · 08-31-2016, 01:02 AM

Quote:

Originally Posted by TopgunZ

Overall Size 20" X 15.25" X 3.50"
Core Size 18.48 X 9.00 X 3.50

Thanks for that TopgunZ.

SlyZGuy · 08-31-2016, 07:32 AM

Quote:

Originally Posted by TopgunZ

Are you on EcuTech with the 4bar map sensor?

No,.

SlyZGuy · 08-31-2016, 07:55 AM

Uprev

nic370 · 08-31-2016, 08:58 AM

Anyone got dyno sheets ?
Interested in intake Temps with the new set up

Sent from my SM-G920F using Tapatalk

08-29-2016, 09:36 AM	#1006 (permalink)
nic370 Base Member Join Date: Apr 2015 Location: uk Posts: 187 Drives: 370 Rep Power: 10	So I just removed the cooler out of the manifold in preparation for going a2a Took the bolts out pulled hard and it slid right out in one hit My manifold is off the car at the moment Sent from my SM-G920F using Tapatalk Last edited by nic370; 08-29-2016 at 11:17 AM.

08-29-2016, 05:30 PM	#1007 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I am about to install the Stillen SC and Topgunz's A2A upgrade kit. I have the Stillen G3 intake, they were already installed when I bought my Z. Question what are you guys using to trim/cut the radiator Support with. I understand it will need this for the intercooler tubes to pass thru. I want to have all the tools ready when my kit arrives. Thanks Last edited by wideglideleon; 08-29-2016 at 05:34 PM.

08-29-2016, 10:42 PM	#1009 (permalink)
SlyZGuy Base Member Join Date: Jan 2016 Location: Maryland Posts: 220 Drives: 2014 370z S/C M6 Rep Power: 9	Mines on and going on dyno tomorrow!!! BOLIO 671, swiss370Z, TBatt and 4 others like this. __________________ Stillen S/C \| '15 Nismo Conversion \| Aodhan \| Eibach \| Tokico \| SPC \| Z1 \| Evo-R \| Aerojacket \| HKS \| Berk \| CFE \| APR \| Amuse \| Z1 \| A2A IC \| AAM \| Buddy Club \|

08-30-2016, 07:12 AM	#1010 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Install looks great! The shop that did it called me and had just one question. It was in regards to the washer reservoir neck hitting the Y pipe. I walked them through that. Other than that they told me the install was very straight forward, easy and everything fit up perfectly! Love how the Tial lets you select a color and those colors match the 370 family. Good luck on the Dyno tomorrow! What are you mods other than the A2A kit? StillenZ84 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-31-2016, 07:55 AM	#1019 (permalink)
SlyZGuy Base Member Join Date: Jan 2016 Location: Maryland Posts: 220 Drives: 2014 370z S/C M6 Rep Power: 9	Uprev __________________ Stillen S/C \| '15 Nismo Conversion \| Aodhan \| Eibach \| Tokico \| SPC \| Z1 \| Evo-R \| Aerojacket \| HKS \| Berk \| CFE \| APR \| Amuse \| Z1 \| A2A IC \| AAM \| Buddy Club \|

08-30-2016, 11:38 AM	#1013 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I guess the Godzilla approach has its merits. I am going for as clean of an install as possible, but thanks. Going to use a Dremel tool I have decided.

08-31-2016, 08:58 AM	#1020 (permalink)
nic370 Base Member Join Date: Apr 2015 Location: uk Posts: 187 Drives: 370 Rep Power: 10	Anyone got dyno sheets ? Interested in intake Temps with the new set up Sent from my SM-G920F using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM