Carbonsignal Custom GTR Style Display Screen

DIGItonium · 07-27-2015, 09:50 AM

Here's some ideas for a lower profile rotary encoder knob. See if this helps with the overall design especially center mounted. You may have to use a spacer to offset the rotary encoder or source a different one:
http://www.adafruit.com/images/970x7...G7UI6cXMfT.jpg
http://www.robot-italy.com/media/cat.../0/2055-02.jpg

Unfortunately, it'll be difficult to make space for a boost control module unless you put the rotary encoder on the extreme sides. Heck, maybe it can be an option with detachable face plates.

CarbonSignal · 07-28-2015, 02:31 AM

Quote:

Originally Posted by DIGItonium

Here's some ideas for a lower profile rotary encoder knob. See if this helps with the overall design especially center mounted. You may have to use a spacer to offset the rotary encoder or source a different one:
http://www.adafruit.com/images/970x7...G7UI6cXMfT.jpg
http://www.robot-italy.com/media/cat.../0/2055-02.jpg

Unfortunately, it'll be difficult to make space for a boost control module unless you put the rotary encoder on the extreme sides. Heck, maybe it can be an option with detachable face plates.

Wait for final design

We are using same rotatory knob its very nice quality and also feel (aluminium), as manage to install airlift and knob along with a decal plate so there is enough space. We did airlift as we are agents for it no so can offer else there will be knob just in middle and also without any holes so customer can install it where ever they like (syncro rev space in autos or between seat heaters) and use this space for boost turbo timer etc.

DIGItonium · 07-28-2015, 09:03 AM

Quote:

Originally Posted by CarbonSignal

Wait for final design

We are using same rotatory knob its very nice quality and also feel (aluminium), as manage to install airlift and knob along with a decal plate so there is enough space. We did airlift as we are agents for it no so can offer else there will be knob just in middle and also without any holes so customer can install it where ever they like (syncro rev space in autos or between seat heaters) and use this space for boost turbo timer etc.

Ha... yea I have 3 blank switch spots. I can easily mount a couple of switches and joy stick in that area. It's fine as long as I don't spill my coffee on it from taking hard turns, which is near impossible in between shifts.

Heck, I might cut into my factory radio bezel and fit something there since it's easier to reach.

CarbonSignal · 07-29-2015, 04:56 AM

Quote:

Originally Posted by DIGItonium

Ha... yea I have 3 blank switch spots. I can easily mount a couple of switches and joy stick in that area. It's fine as long as I don't spill my coffee on it from taking hard turns, which is near impossible in between shifts.

Heck, I might cut into my factory radio bezel and fit something there since it's easier to reach.

you can opt for black one make holes and install anything you like there

DIGItonium · 07-30-2015, 12:12 PM

Quote:

Originally Posted by CarbonSignal

you can opt for black one make holes and install anything you like there

Silva91 · 07-29-2015, 03:51 AM

sub'd

tanamerra · 07-30-2015, 08:38 AM

When will this item be available for purchase?

kbc749 · 08-02-2015, 01:06 PM

subbed for finished project

CarbonSignal · 08-04-2015, 11:14 PM

carbon prototype is ready getting installed this week

Making few more samples, with and without airlift controller in painted, vinyl material same as stock stitched in the middle and in alcantara

sandersd · 08-10-2015, 06:19 AM

Quote:

Originally Posted by CarbonSignal

Looks great! I'm interested in a panel that replaces the cubby and fits a 7" tablet screen. I don't need switches or a rotary encoder. I prefer to have maximum screen area.

When you have these ready for sale I will buy one! Keep up the great work.

CarbonSignal · 08-11-2015, 11:04 PM

Quote:

Originally Posted by sandersd

Looks great! I'm interested in a panel that replaces the cubby and fits a 7" tablet screen. I don't need switches or a rotary encoder. I prefer to have maximum screen area.

When you have these ready for sale I will buy one! Keep up the great work.

Yeah possible but cant commit if it will hold any other 7" tablet as we made to hold the screen we have it but can be tried for sure.

370Z JT · 08-04-2015, 11:41 PM

CS, will you be able to produce a double din face plate to match the CF weave?

CarbonSignal · 08-05-2015, 02:52 AM

Quote:

Originally Posted by 370Z JT

CS, will you be able to produce a double din face plate to match the CF weave?

We can see all depends on if time allows

2009_370z · 08-07-2015, 02:20 PM

OH...... SNAP

Ryguy · 08-07-2015, 03:06 PM

Would you be able to make an area to mount Tein's EDFC active below the screen?

Sent from my iPhone using Tapatalk

07-27-2015, 09:50 AM	#1 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 44	Here's some ideas for a lower profile rotary encoder knob. See if this helps with the overall design especially center mounted. You may have to use a spacer to offset the rotary encoder or source a different one: http://www.adafruit.com/images/970x7...G7UI6cXMfT.jpg http://www.robot-italy.com/media/cat.../0/2055-02.jpg Unfortunately, it'll be difficult to make space for a boost control module unless you put the rotary encoder on the extreme sides. Heck, maybe it can be an option with detachable face plates. __________________

07-30-2015, 08:38 AM	#7 (permalink)
tanamerra Base Member Join Date: May 2010 Location: Delaware Posts: 145 Drives: 2010 370Z Nismo Rep Power: 17	When will this item be available for purchase? __________________ 2010 370Z Nismo Motordyne M370, Injen cai, HKS cbe, Uprev, Work wheels, Radi-Cal brake kit

08-04-2015, 11:41 PM	#12 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 380	CS, will you be able to produce a double din face plate to match the CF weave? Z34_Nismo likes this. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

08-07-2015, 02:20 PM	#14 (permalink)
2009_370z Enthusiast Member Join Date: Dec 2014 Location: BAY AREA Posts: 297 Drives: 09 370Z MPB 7AT Rep Power: 12	OH...... SNAP __________________ *SEIBON/EVO-R/AAM COMPETITION/TSW WHEELS/MICHELIN/Z1/EBC*

08-07-2015, 03:06 PM	#15 (permalink)
Ryguy Base Member Join Date: Feb 2013 Location: Oak Harbor, WA Posts: 186 Drives: 11 Nissan 370z white Rep Power: 14	Would you be able to make an area to mount Tein's EDFC active below the screen? Sent from my iPhone using Tapatalk __________________ 11 PW base 370z w/ Z1 25 row oil cooler, K&N typhoon short ram intake, Megan racing drift spec catback, Z1 CSC Elimination kit, Work Emotion CR Ultimate, akebono sport calipers, DBA rotors

07-29-2015, 03:51 AM	#6 (permalink)
Silva91 Base Member Join Date: Oct 2014 Location: South Fl Posts: 97 Drives: '11 Sport/Touring Rep Power: 12	sub'd

08-02-2015, 01:06 PM	#8 (permalink)
kbc749 Base Member Join Date: Jan 2015 Location: Columbus Ohio Posts: 161 Drives: 2010 370z 6MT Rep Power: 12	subbed for finished project

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
9" Custom Mimic Screen Installed	Nissan Shon	New Forum Member	6	10-30-2014 07:02 AM
Double din LCD screen or multi-line display	GalletGun	Audio & Video	14	11-16-2013 09:38 PM
[FOR SALE] Escort 9500ix radar red display w/hardwire custom switch MINT	SATX_NISMO	Parts for sale (Private Classifieds)	23	10-21-2013 08:46 PM
Ipod Touch wont display on the Nav screen	f370z	Audio & Video	9	03-03-2012 10:48 PM
Nav/display screen brightness question	VADSG	Audio & Video	0	08-16-2009 05:04 PM