Z speed under cover fitment?

berrydingle · 07-09-2016, 05:19 PM

Hi guys,

I bought a 09-14 OEM nismo front bumper and the under cover to go with it from concept Z but my shop is having issues with a fitment.

Vendor told me it's supposed to bolt right up but it's a no go.

Mines a 12 370z sports touring trim with nav. Anything I'm doing wrong or missing?

Zbrah · 07-09-2016, 05:24 PM

Quote:

Originally Posted by berrydingle

Hi guys,

I bought a 09-14 OEM nismo front bumper and the under cover to go with it from concept Z but my shop is having issues with a fitment.

Vendor told me it's supposed to bolt right up but it's a no go.

Mines a 12 370z sports touring trim with nav. Anything I'm doing wrong or missing?

you're missing the under liner thingy that comes with the factory nismo bumper...that piece is sold separately and runs about $500. And I believe there are two versions of the zspeed under shroud...one for the base bumper and one for the Nismo. Are you sure you ordered the right part?

Trips · 07-09-2016, 05:32 PM

First off it looks to be bolted to far back it should be bolted starting at the bumper and working yourself back.

berrydingle · 07-09-2016, 05:50 PM

Quote:

Originally Posted by Zbrah

you're missing the under liner thingy that comes with the factory nismo bumper...that piece is sold separately and runs about $500. And I believe there are two versions of the zspeed under shroud...one for the base bumper and one for the Nismo. Are you sure you ordered the right part?

I ordered the part Concept Z told me to get to complete the bumper finish....

Attached is the order confirmation

Can you tell me what other parts I need to buy to complete this?

berrydingle · 07-09-2016, 05:54 PM

I wonder if they shipped the wrong part.....

Hotrodz · 07-09-2016, 05:56 PM

Quote:

Originally Posted by Zbrah

you're missing the under liner thingy that comes with the factory nismo bumper...that piece is sold separately and runs about $500. And I believe there are two versions of the zspeed under shroud...one for the base bumper and one for the Nismo. Are you sure you ordered the right part?

What Zbrah said...its the front splitter that attaches to the under tray.

Sent from my SM-N910P using Tapatalk

Zbrah · 07-09-2016, 07:46 PM

https://conceptzperformance.com/items.php?c=NIS370&p=25
Front diffuser for nismo

Trips · 07-09-2016, 09:13 PM

Quote:

Originally Posted by Zbrah

https://conceptzperformance.com/items.php?c=NIS370&p=25
Front diffuser for nismo

Thanks for helping.

I assumed by the bolt pattern towards the front it was supposed to be bolted directly to the bumper.

Seeing the extended Nismo piece that bolts from there to the bumper? I see what your saying.

berrydingle · 07-09-2016, 09:16 PM

Thanks for sharing guys. I messages Mike @ CZP too.. Hope he will LMK what's going on.

Zbrah · 07-09-2016, 10:41 PM

You can probably reuse the original under tray in place of the zspeed one in conjunction with the front nismo diffuser, no need to buy both unless that's what you really wanted. The zspeed cover does offer better protection to the oil pan and has a convenient feature to change your oil without having to remove the under shroud each time.

TriNismo · 07-09-2016, 11:51 PM

Yeah this is what you're missing

http://www.zspeedperformance.com/Nis...2026-1A47A.htm

Sent from my iPhone using Tapatalk

OTW Z-Boy · 07-10-2016, 11:01 AM

Other than access to the oil filter and drain plug, what are the benefits to these parts?

berrydingle · 07-10-2016, 06:48 PM

Quote:

Originally Posted by TriNismo

Yeah this is what you're missing

Nissan 370z Nismo OEM Lower Front Splitter

Sent from my iPhone using Tapatalk

I appreciate this help really man!!! wish Mike told me i needed to buy this too.. Now I have to wait for another week for my car

OptionZero · 07-10-2016, 08:08 PM

Quote:

Originally Posted by OTW Z-Boy

Other than access to the oil filter and drain plug, what are the benefits to these parts?

Protection from rocks and debris

cv129 · 07-10-2016, 08:31 PM

My personal experience

OEM plastic tray:

Stupid expensive
Light weight
If the middle 3 clips are missing, it'll sag, especially in high heat (summer heat plus hot engine). On a lowered car, the sagging portion will rub the ground a lot more and eventually tear an opening, where bad air flow will produce this flapping noise at highway speed, making you think something is seriously wrong and seriously embarrassing. However, it'll sacrifice itself when bottoming out rather than destroying the mounting holes.

ZSpeed aluminum tray:

Relatively cheap, even the Nismo version.
Rigid. Doesn't sag even if the middle 3 clips are missing.
Easy oil filter access
Bad thing is if you bottom out in a bad angle, any damage to this aluminum unit is permanent and can tear the mounting hole/s

07-09-2016, 05:32 PM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	First off it looks to be bolted to far back it should be bolted starting at the bumper and working yourself back. __________________

07-09-2016, 07:46 PM	#7 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	https://conceptzperformance.com/items.php?c=NIS370&p=25 Front diffuser for nismo Trips and berrydingle like this. __________________

07-09-2016, 09:16 PM	#9 (permalink)
berrydingle Base Member Join Date: Feb 2016 Location: Atlanta, GA Posts: 128 Drives: 2012 370z Rep Power: 9	Thanks for sharing guys. I messages Mike @ CZP too.. Hope he will LMK what's going on. Trips likes this.

07-09-2016, 10:41 PM	#10 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	You can probably reuse the original under tray in place of the zspeed one in conjunction with the front nismo diffuser, no need to buy both unless that's what you really wanted. The zspeed cover does offer better protection to the oil pan and has a convenient feature to change your oil without having to remove the under shroud each time. Hotrodz likes this. __________________

07-09-2016, 11:51 PM	#11 (permalink)
TriNismo Enthusiast Member Join Date: Jun 2014 Location: Florida Posts: 333 Drives: 2014 370z Nismo Rep Power: 504	Z speed under cover fitment? Yeah this is what you're missing http://www.zspeedperformance.com/Nis...2026-1A47A.htm Sent from my iPhone using Tapatalk berrydingle likes this. Last edited by TriNismo; 07-09-2016 at 11:54 PM.

07-09-2016, 05:54 PM	#5 (permalink)
berrydingle Base Member Join Date: Feb 2016 Location: Atlanta, GA Posts: 128 Drives: 2012 370z Rep Power: 9	I wonder if they shipped the wrong part.....

07-10-2016, 11:01 AM	#12 (permalink)
OTW Z-Boy A True Z Fanatic Join Date: Mar 2012 Location: Temecula Ca Posts: 1,225 Drives: 14 Nismo 370z #495 Rep Power: 750	Other than access to the oil filter and drain plug, what are the benefits to these parts? __________________ 2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI \| SPL F/R Camber Arms \| HKS Hypermax IV \| JDM Rear Fog Light \|GT-R Push Start Button \| Z1 2 Piece D/S \| Illuminated Kicks \| Tommykaira \| Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 \| Fast Intentions RHFC TDX CBE 12" CF \| EcuTek

07-10-2016, 08:31 PM	#15 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,192 Drives: 09 Nismo, 16 Nismo Rep Power: 159827	My personal experience OEM plastic tray: Stupid expensive Light weight If the middle 3 clips are missing, it'll sag, especially in high heat (summer heat plus hot engine). On a lowered car, the sagging portion will rub the ground a lot more and eventually tear an opening, where bad air flow will produce this flapping noise at highway speed, making you think something is seriously wrong and seriously embarrassing. However, it'll sacrifice itself when bottoming out rather than destroying the mounting holes. ZSpeed aluminum tray: Relatively cheap, even the Nismo version. Rigid. Doesn't sag even if the middle 3 clips are missing. Easy oil filter access Bad thing is if you bottom out in a bad angle, any damage to this aluminum unit is permanent and can tear the mounting hole/s cooltoy and Leadfooted like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield Last edited by cv129; 07-10-2016 at 08:35 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Top Speed Axleback Exhaust Fitment	WELL ZED	Intake/Exhaust	12	06-04-2016 02:55 PM
Zenclosures sub box fitment with rear cover???	Mike@ZE	ZEnclosures	6	08-26-2014 04:02 PM
Top Speed Axle Back - Nismo Fitment	C Haller	Intake/Exhaust	3	07-12-2013 03:29 PM
Top Speed Axleback Fitment	a6walter1	Intake/Exhaust	11	04-17-2013 05:01 PM
Evo-r Lip AND fang cover fitment	ddvette9	Exterior & Interior	2	11-16-2011 09:59 PM