Carbonsignal Custom GTR Style Display Screen

CarbonSignal · 07-28-2015, 02:31 AM

Quote:

Originally Posted by DIGItonium

Here's some ideas for a lower profile rotary encoder knob. See if this helps with the overall design especially center mounted. You may have to use a spacer to offset the rotary encoder or source a different one:
http://www.adafruit.com/images/970x7...G7UI6cXMfT.jpg
http://www.robot-italy.com/media/cat.../0/2055-02.jpg

Unfortunately, it'll be difficult to make space for a boost control module unless you put the rotary encoder on the extreme sides. Heck, maybe it can be an option with detachable face plates.

Wait for final design

We are using same rotatory knob its very nice quality and also feel (aluminium), as manage to install airlift and knob along with a decal plate so there is enough space. We did airlift as we are agents for it no so can offer else there will be knob just in middle and also without any holes so customer can install it where ever they like (syncro rev space in autos or between seat heaters) and use this space for boost turbo timer etc.

DIGItonium · 07-28-2015, 09:03 AM

Quote:

Originally Posted by CarbonSignal

Wait for final design

We are using same rotatory knob its very nice quality and also feel (aluminium), as manage to install airlift and knob along with a decal plate so there is enough space. We did airlift as we are agents for it no so can offer else there will be knob just in middle and also without any holes so customer can install it where ever they like (syncro rev space in autos or between seat heaters) and use this space for boost turbo timer etc.

Ha... yea I have 3 blank switch spots. I can easily mount a couple of switches and joy stick in that area. It's fine as long as I don't spill my coffee on it from taking hard turns, which is near impossible in between shifts.

Heck, I might cut into my factory radio bezel and fit something there since it's easier to reach.

CarbonSignal · 07-29-2015, 04:56 AM

Quote:

Originally Posted by DIGItonium

Ha... yea I have 3 blank switch spots. I can easily mount a couple of switches and joy stick in that area. It's fine as long as I don't spill my coffee on it from taking hard turns, which is near impossible in between shifts.

Heck, I might cut into my factory radio bezel and fit something there since it's easier to reach.

you can opt for black one make holes and install anything you like there

DIGItonium · 07-30-2015, 12:12 PM

Quote:

Originally Posted by CarbonSignal

you can opt for black one make holes and install anything you like there

jsutton2 · 07-30-2015, 05:23 PM

In for updates.

CarbonSignal · 08-02-2015, 12:19 AM

Quote:

Originally Posted by tanamerra

When will this item be available for purchase?

Quote:

Originally Posted by jsutton2

In for updates.

Once we post final one running then a GB will be started.

At the shop update as of today is molding process of piece we posted last week is done, first product in Cabon Fiber is done under clear coat, we plan to install and hook it up this week with pictures and a video.

07-30-2015, 05:23 PM	#5 (permalink)
jsutton2 Base Member Join Date: Jul 2014 Location: Austin Posts: 239 Drives: 2010 370Z Sport Rep Power: 12	In for updates. __________________ 2010 Brilliant Silver 370z Sport - 08/01/2014 - And so it begins...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
9" Custom Mimic Screen Installed	Nissan Shon	New Forum Member	6	10-30-2014 07:02 AM
Double din LCD screen or multi-line display	GalletGun	Audio & Video	14	11-16-2013 09:38 PM
[FOR SALE] Escort 9500ix radar red display w/hardwire custom switch MINT	SATX_NISMO	Parts for sale (Private Classifieds)	23	10-21-2013 08:46 PM
Ipod Touch wont display on the Nav screen	f370z	Audio & Video	9	03-03-2012 10:48 PM
Nav/display screen brightness question	VADSG	Audio & Video	0	08-16-2009 05:04 PM