Show Us Your Roll Bar

synolimit · 08-06-2015, 08:42 PM

Quote:

Originally Posted by TerribleONE

Its also clearly a custom full cage. Big difference.

Lol here's shovelmans build...guess where the main support hoops go? The towers. Anyone remember Spohn? Guess what? Tower.

synolimit · 08-06-2015, 08:48 PM

Spohn

synolimit · 08-06-2015, 08:48 PM

Mike

synolimit · 08-06-2015, 08:49 PM

Doran for crying out loud and I believe the RC race car comes from Nissan with the cage already installed for $150,000! Show of hands who's smarter than a Nissan engineer?

GaleForce · 08-06-2015, 09:18 PM

You're talking about two totally different categories of people. Yes, the bar you're showing is very safe, well engineered, and probably four times the price. People looking this thread are not interested in spending that kind of money otherwise they wouldn't be looking at this thread.

This has turned into a thread about the RPM cages. People interested in these cages are more than likely comparing them to a harness bar. If you had a choice between a harness bar and the RPM cage, which would you rather have?

I'll bet you would take the RPM cage.

Dcocci · 08-06-2015, 09:50 PM

Hmmmm sounds like they stand by their product. I'm not going to argue over whether a custom built cage is safer than a bolt in cage, however if these guys can say "it will pass inspection or we'll give you your money back", that's a good starting point no? These look way safer than some of the garbage you see from china or japan.

Hotrodz · 08-06-2015, 09:50 PM

This and my intent was that others who had roll bars would post up and tell us about them, custom or otherwise. I think the reason no one has is because many are what you have posted, custom builds for straight up race cars. What many folks here are looking for is a reasonably price bolt on that would meet the standards of the sanctioning racing organization and/or would be useful for spirited driving. My assumption is that RPM is really the only one building a bolt on rollbar for our platform.

critical · 08-06-2015, 10:07 PM

how much was the cage?

synolimit · 08-06-2015, 10:08 PM

Quote:

Originally Posted by GaleForce

You're talking about two totally different categories of people. Yes, the bar you're showing is very safe, well engineered, and probably four times the price. People looking this thread are not interested in spending that kind of money otherwise they wouldn't be looking at this thread.

This has turned into a thread about the RPM cages. People interested in these cages are more than likely comparing them to a harness bar. If you had a choice between a harness bar and the RPM cage, which would you rather have?

I'll bet you would take the RPM cage.

yes the first one is prob $3-4k but the others are in the $1000-1500 range. all im simply saying is make sure you say "its bolted to an unsafe, non-structural location" or just simply move the mount up a tad haha.

id rather bolt my belt to the cage, you're correct.

Quote:

Originally Posted by Dcocci

Hmmmm sounds like they stand by their product. I'm not going to argue over whether a custom built cage is safer than a bolt in cage, however if these guys can say "it will pass inspection or we'll give you your money back", that's a good starting point no? These look way safer than some of the garbage you see from china or japan.

i think bolt in is plenty safe. thats why SCCA and NASA allow them. but they must bolt to the correct spots. ill have to read up on the SCCA hand book. i do believe they tell you where to go and how.

Quote:

Originally Posted by Hotrodz

This and my intent was that others who had roll bars would post up and tell us about them, custom or otherwise. I think the reason no one has is because many are what you have posted, custom builds for straight up race cars. What many folks here are looking for is a reasonably price bolt on that would meet the standards of the sanctioning racing organization and/or would be useful for spirited driving. My assumption is that RPM is really the only one building a bolt on rollbar for our platform.

i agree. but i think the rear ones i showed like shovel, spohn and mike are just for street and HPDE days and only a little better than the RPM. i wouldnt call them race cars like Doran or the first one. ive said my piece, just want everyone to be aware and be safe.

Hotrodz · 08-06-2015, 11:13 PM

No worries man, I'm not knocking your opinion regarding the safety of the roll bars that you have posted but none of those individuals have weighed in, or are on the forum, or willing to provide information on their design. One thing is for sure, is that if someone post up a roll bar or full cage, they will get scrutinized and the opinions on safety abound. Not a bad thing, just a thing...my only aim is to provide information about the bar I have and RPM I reached out to RPM simply to clarify a couple of questions that I had received from interested members and after speaking with Dave he wanted to provide those interested members the opportunity to purchase his product.

That will all be done in separate thread for sure.

Hotrodz · 08-06-2015, 11:16 PM

Quote:

Originally Posted by critical

how much was the cage?

I don't know, they are waiting on the approval to be a vendor before they post.

synolimit · 08-07-2015, 08:36 AM

I did notice one thing I wanted to add about the first pic and the yellow cars cage. I see their main hoop is mounted to the floor up on the gas tank ledge. In a full roof impact I don't think that's the best location. I don't think that ledge is stronger than doing it to the floor like RPM does. Under the main floor in that location is our square box frame rails. That floor plus the strength of the frame rail underneath should be crazy strong! Up on the ledge I believe that's thin sheet metal again and I'd hate to see the main hoop punch through the floor there. It's happened!

Hotrodz · 08-07-2015, 09:02 AM

The front bars are mounted through the frame!

MAMotorsports · 08-07-2015, 09:52 AM

I have actually spoken with RPM a little bit also about being active on here. And would be more than happy to set up a group buy if they would like to work with me on that also!

If anyone is interested in Pricing, PM me as there are a few options we can go over that would affect the cost!

Thanks
-Daelen

Hotrodz · 08-07-2015, 10:23 AM

More options the better...we all win!

Sent from my SM-N910P using Tapatalk

08-06-2015, 09:18 PM	#35 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	You're talking about two totally different categories of people. Yes, the bar you're showing is very safe, well engineered, and probably four times the price. People looking this thread are not interested in spending that kind of money otherwise they wouldn't be looking at this thread. This has turned into a thread about the RPM cages. People interested in these cages are more than likely comparing them to a harness bar. If you had a choice between a harness bar and the RPM cage, which would you rather have? I'll bet you would take the RPM cage. TerribleONE, Hotrodz, kukpet and 1 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

08-06-2015, 09:50 PM	#36 (permalink)
Dcocci Base Member Join Date: Sep 2014 Location: Santa Barbara, CA Posts: 215 Drives: 2014 370z black 6spd Rep Power: 10	Hmmmm sounds like they stand by their product. I'm not going to argue over whether a custom built cage is safer than a bolt in cage, however if these guys can say "it will pass inspection or we'll give you your money back", that's a good starting point no? These look way safer than some of the garbage you see from china or japan. GaleForce and Hotrodz like this. __________________ -08 Porsche Cayman S

08-06-2015, 09:50 PM	#37 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	This and my intent was that others who had roll bars would post up and tell us about them, custom or otherwise. I think the reason no one has is because many are what you have posted, custom builds for straight up race cars. What many folks here are looking for is a reasonably price bolt on that would meet the standards of the sanctioning racing organization and/or would be useful for spirited driving. My assumption is that RPM is really the only one building a bolt on rollbar for our platform. GaleForce and kukpet like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

08-06-2015, 10:07 PM	#38 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 15	how much was the cage? __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms\|

08-06-2015, 11:13 PM	#40 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	No worries man, I'm not knocking your opinion regarding the safety of the roll bars that you have posted but none of those individuals have weighed in, or are on the forum, or willing to provide information on their design. One thing is for sure, is that if someone post up a roll bar or full cage, they will get scrutinized and the opinions on safety abound. Not a bad thing, just a thing...my only aim is to provide information about the bar I have and RPM I reached out to RPM simply to clarify a couple of questions that I had received from interested members and after speaking with Dave he wanted to provide those interested members the opportunity to purchase his product. That will all be done in separate thread for sure. kukpet likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

08-07-2015, 09:02 AM	#43 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	The front bars are mounted through the frame! synolimit likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

08-07-2015, 09:52 AM	#44 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 16	I have actually spoken with RPM a little bit also about being active on here. And would be more than happy to set up a group buy if they would like to work with me on that also! If anyone is interested in Pricing, PM me as there are a few options we can go over that would affect the cost! Thanks -Daelen Hotrodz likes this. __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

08-07-2015, 10:23 AM	#45 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	More options the better...we all win! Sent from my SM-N910P using Tapatalk Baronsmokes likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
East vs West show down!! 1/4 mile, car show, dyno. Who's going??	Gregor12	South East Region	1	11-04-2014 02:27 PM
MYSTIC Auto Show & Waterloo Air Show	flaelin	Canada	3	06-17-2014 10:07 PM
AZ: Show N Shine! Wretched Intentions/Charity Car Show! St. Mary's Food Bank Alliance	Jake_Epley	Western Region	0	11-03-2013 08:28 AM
So-Cal Summer Daze Car Show Jul/17th/10 Free car show	ElitePromo	Southern California Region	11	07-09-2010 03:51 AM
Booth Babes of 2009 Essen Motor Show, Los Angeles Auto Show, Tokyo Motor Show etc :D	AK370Z	Gentleman's Club	29	12-07-2009 08:33 PM