Recommendations for new clutch

stube40 · 09-16-2021, 08:38 PM

Some great advice! You guys rock!!!

I should add that the reservoir under the hood next to the brake fluid (I assume this is the master cylinder reservoir) is right on MAX so the level is fine. But I did notice it is a slightly brownish colour so I'm wondering if it's contaminated and needing of a flush.....

Is the general consensus just to replace the master/slave cylinder at this point or to do the entire clutch/master-cyl/slave-cyl combination?

The reason I am asking is that I have a few mobile mechanics that I work with who can do a whole lot of stuff but none of them have a hoist so they can't replace a clutch and I have to take it to a workshop instead - so if I can get away with not replacing the clutch for now I would consider it.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch recommendations for more power?	Randomizer23	Engine & Drivetrain	3	09-19-2020 05:15 AM
Clutch issues, need recommendations	Stino	Engine & Drivetrain	6	07-30-2019 07:45 PM
Clutch Recommendations	south	Engine & Drivetrain	9	05-07-2019 10:28 PM
Clutch Recommendations	Chemicool	Engine & Drivetrain	17	06-10-2016 07:22 AM
Clutch Recommendations.	houkouonchi	Engine & Drivetrain	33	08-10-2013 08:14 AM

09-16-2021, 08:38 PM	#9 (permalink)
stube40 Base Member Join Date: May 2021 Location: Perth, Australia Posts: 18 Drives: 10 Nissan 370Z R M6 Rep Power: 6	Some great advice! You guys rock!!! I should add that the reservoir under the hood next to the brake fluid (I assume this is the master cylinder reservoir) is right on MAX so the level is fine. But I did notice it is a slightly brownish colour so I'm wondering if it's contaminated and needing of a flush..... Is the general consensus just to replace the master/slave cylinder at this point or to do the entire clutch/master-cyl/slave-cyl combination? The reason I am asking is that I have a few mobile mechanics that I work with who can do a whole lot of stuff but none of them have a hoist so they can't replace a clutch and I have to take it to a workshop instead - so if I can get away with not replacing the clutch for now I would consider it.....