Bell Raceworks Diff Brace Install

NeverBoneStck · 01-30-2019, 08:12 PM

When I installed mine I had to trim some nismo diff. When I posted the picks I instagram bell replied right away and said it should have zero issues. They just revised their website. Use to say will fit on any diff cover. Now it mentions you might have to modify.
Picks are on Instagram bmpboosted

redondoaveb · 01-30-2019, 08:17 PM

Quote:

Originally Posted by NeverBoneStck

When I installed mine I had to trim some nismo diff. When I posted the picks I instagram bell replied right away and said it should have zero issues. They just revised their website. Use to say will fit on any diff cover. Now it mentions you might have to modify.
Picks are on Instagram bmpboosted

I just saw your picture, looks good. That's not too much trimming. But those of us with Fast Intentions exhaust are screwed it looks like.

Rusty · 01-30-2019, 08:35 PM

Quote:

Originally Posted by NeverBoneStck

When I installed mine I had to trim some nismo diff. When I posted the picks I instagram bell replied right away and said it should have zero issues. They just revised their website. Use to say will fit on any diff cover. Now it mentions you might have to modify.
Picks are on Instagram bmpboosted

Not on instagram.

Rusty · 01-30-2019, 08:37 PM

Quote:

Originally Posted by redondoaveb

This is on Z1's website. Could the partial removal of the diff be due to the top hole not lining up.

Installation of this brace may require partial removal of the rear differential

When you have SPL solid diff bushings. There is no movement. The diff sits where it sits.

NeverBoneStck · 01-30-2019, 08:38 PM

Quote:

Originally Posted by Rusty

Not on instagram.

It’s bmpboosted you can see their reply

redondoaveb · 01-30-2019, 08:58 PM

Quote:

Originally Posted by Rusty

When you have SPL solid diff bushings. There is no movement. The diff sits where it sits.

They may not have thought about that when the made the mount. Maybe they figured there would be enough movement to be able to fudge the diff enough to be able to install the bolt.

Rusty · 01-30-2019, 08:58 PM

Something else I forgot to mention. On the bends of the brace. There is weld beads on the bends? The only thing that I can figure out. Is that when they bent the metal to shape. The metal cracked at the bends and they welded over the cracks to hide them.

Piss poor.

redondoaveb · 01-30-2019, 08:59 PM

Quote:

Originally Posted by NeverBoneStck

It’s bmpboosted you can see their reply

I think Rusty is saying he's not on Instagram.

Rusty · 01-30-2019, 09:00 PM

I just got done writing a review on the brace on Z1's website.

Rusty · 01-30-2019, 09:01 PM

Quote:

Originally Posted by redondoaveb

I think Rusty is saying he's not on Instagram.

Yep!

redondoaveb · 01-30-2019, 09:13 PM

Quote:

Originally Posted by Rusty

I just got done writing a review on the brace on Z1's website.

I gotta read that.

Rusty · 01-30-2019, 09:20 PM

Quote:

Originally Posted by redondoaveb

I gotta read that.

I wrote it. I went back to read it and it's not there.

redondoaveb · 01-30-2019, 09:24 PM

Quote:

Originally Posted by Rusty

I wrote it. I went back to read it and it's not there.

Same here, it wasn't there

Rusty · 01-30-2019, 09:34 PM

Quote:

Originally Posted by redondoaveb

Same here, it wasn't there

Wonder if it gets reviewed first before they put it up.

Hotrodz · 01-30-2019, 09:43 PM

Well I guess I lucked out by not jumping on the early band wagon! I was hoping that it would work too.

01-30-2019, 08:12 PM	#16 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 17	When I installed mine I had to trim some nismo diff. When I posted the picks I instagram bell replied right away and said it should have zero issues. They just revised their website. Use to say will fit on any diff cover. Now it mentions you might have to modify. Picks are on Instagram bmpboosted redondoaveb and Bswanny like this. __________________ Juiced! That is all you need to know !!

01-30-2019, 08:58 PM	#22 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,862 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Something else I forgot to mention. On the bends of the brace. There is weld beads on the bends? The only thing that I can figure out. Is that when they bent the metal to shape. The metal cracked at the bends and they welded over the cracks to hide them. Piss poor. Bswanny likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-30-2019, 09:00 PM	#24 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,862 Drives: 2011 Nismo GM 6M Rep Power: 2684436	I just got done writing a review on the brace on Z1's website. Hotrodz, Ghostvette, Spooler and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-30-2019, 09:43 PM	#30 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	Well I guess I lucked out by not jumping on the early band wagon! I was hoping that it would work too. RN SHARK, ZontheRocks and redondoaveb like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2015+ Nismo Rear Chassis Brace Install	nismolucino	DIY Section (Do-It-Yourself)	9	02-22-2021 11:00 AM
Z1 Brake Master Cylinder Brace - Install Help	140BPM	Brakes & Suspension	10	04-22-2019 09:06 PM
Has anyone been able to install a Z1 master cylinder brace?	gshort24	Brakes & Suspension	4	08-11-2016 02:05 PM
Rear brace bar removal/install?	TriNismo	Exterior & Interior	8	08-17-2015 11:02 PM