VQ37VHR 400HP Package BF

John@Z1 · 01-02-2014, 09:05 AM

Quote:

Originally Posted by Zed-Hed

Z1,
As part of the tune are you able to improve the gas pedal delay?

How much power is lost with high flow cats and did you have any check engine lights?
Regards,
Mark

Yes we are able to improve the pedal feel. We normally see 7-8rwhp less on a High Flow catted car. No check engine lights.

Zed-Hed · 01-05-2014, 01:07 PM

John,
When will your intake be available?

brucelidat · 01-07-2014, 07:12 PM

sub'd for more people's 3rd party results with the IM

2sl0w · 01-14-2014, 07:13 PM

Quote:

Originally Posted by brucelidat

sub'd for more people's 3rd party results with the IM

Attached is my dyno with the Z1 powermod (manifold not 400hp kit) pre and post tune. The tune was a touchup tune. The car was previously tuned for the same mods listed below.

Mods:
Z1 post maf tubes w/stock filters.
NST pulley's
F.I. CBE
Stock Cats

This was by far the best mod I have purchased. It really beefs up the midrange, which makes the car more enjoyable to drive around town, while maintaining top end power. I will say that the exhaust tone changed a bit in a positive way: slightly bassier tone at idle and a noticeable throaty sound at WOT. From the results of the dyno sheet, I highly recommend you get a tune after installing this to get the full potential out of it.

I am assuming I am a few HP higher than this now with k&n drop ins. I cant find the sheet but the car made 304hp with Cosworth filters. Changing them to new(ish) stock filters netted +4-5hp.

Zed-Hed · 01-14-2014, 07:26 PM

How much for just the manifold?

brucelidat · 01-14-2014, 07:51 PM

So the only difference between the 2 pulls in your dyno is the manifold and re-tune ( already had it tuned before for existing mods)? Wow, looks too good to be true.

NeverBoneStck · 01-14-2014, 08:39 PM

The big question is how this thing does compared to the motordyne manifold

brucelidat · 01-14-2014, 08:53 PM

If z1 offers this by itself, I might pick it up and let you all know.

2sl0w · 01-14-2014, 10:09 PM

Quote:

Originally Posted by brucelidat

So the only difference between the 2 pulls in your dyno is the manifold and re-tune ( already had it tuned before for existing mods)? Wow, looks too good to be true.

To be clear the first run and baseline is with the manifold installed with my old tune, and the second line is the end result of the manifold + tuning.

On a different day, with different exhaust and intakes the car made 285 whp with the m370 on this dyno. The dyno sheet is in the m370 thread results post look for the one titled Daisuke.

It is not the best and clearest a + b = c dyno comparison but the gains are noticeable and worth it IMO.

It is on the website now: http://www.z1motorsports.com/g37_370...9ssec36vnpshl5

At that price it is a steal and definitely a better $ to HP ratio.

** edit **

On the website the second dyno sheet is m370 vs z1 powermod. The results speak for themselves.

Sent from my Nexus 5 using Tapatalk

brucelidat · 01-14-2014, 10:11 PM

Looks like it's available on their site by itself now, not just as part of the 400hp kit.

brucelidat · 01-14-2014, 10:16 PM

Is there a dyno with the average of the runs so we can more easily see the differences throughout the rpm range?

2sl0w · 01-14-2014, 10:18 PM

Quote:

Originally Posted by brucelidat

Is there a dyno with the average of the runs so we can more easily see the differences throughout the rpm range?

I'll ask Jon @z1 if he can send a more detailed sheet with the other runs.

Sent from my Nexus 5 using Tapatalk

brucelidat · 01-14-2014, 10:21 PM

oh man, hope i don't have to much trouble selling the m370 if i switch to this

Megan370z · 01-14-2014, 10:42 PM

So according to their testing about their modded vhr intakme manifold is a 9whp gain for 295$ + 220$ core charge if you dont return yours ....

So I wasnt to far off by asking 525 for a complete modified intake manifold.

edit ; oups... I thought on their website they did the stock VHR Intake manifold vs their modded one.. but it was the unmodified HR vs their modded one..

I would love to see an actual test with a modified HR vs their VHR ... I would still stand if about an HR modified could be superior 3500-7000whp

Megan370z · 01-14-2014, 10:44 PM

Quote:

Originally Posted by brucelidat

oh man, hope i don't have to much trouble selling the m370 if i switch to this

If the same modification on the HR intake manifold *m370* .. a very similar result will be gaining and will still remain the best for 3500-7000rpm

01-07-2014, 07:12 PM	#63 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	sub'd for more people's 3rd party results with the IM __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

01-14-2014, 07:51 PM	#66 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	So the only difference between the 2 pulls in your dyno is the manifold and re-tune ( already had it tuned before for existing mods)? Wow, looks too good to be true. Megan370z likes this. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

01-14-2014, 08:39 PM	#67 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 17	The big question is how this thing does compared to the motordyne manifold __________________ Juiced! That is all you need to know !!

01-14-2014, 08:53 PM	#68 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	If z1 offers this by itself, I might pick it up and let you all know. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

01-14-2014, 10:11 PM	#70 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	Looks like it's available on their site by itself now, not just as part of the 400hp kit. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

01-05-2014, 01:07 PM	#62 (permalink)
Zed-Hed Base Member Join Date: Jan 2009 Location: Raleigh,NC Posts: 94 Drives: 2010 Z/2015 Z Rep Power: 20	John, When will your intake be available?

01-14-2014, 07:26 PM	#65 (permalink)
Zed-Hed Base Member Join Date: Jan 2009 Location: Raleigh,NC Posts: 94 Drives: 2010 Z/2015 Z Rep Power: 20	How much for just the manifold?

01-14-2014, 10:16 PM	#71 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	Is there a dyno with the average of the runs so we can more easily see the differences throughout the rpm range? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

01-14-2014, 10:21 PM	#73 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	oh man, hope i don't have to much trouble selling the m370 if i switch to this __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

01-14-2014, 10:42 PM	#74 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 23	So according to their testing about their modded vhr intakme manifold is a 9whp gain for 295$ + 220$ core charge if you dont return yours .... So I wasnt to far off by asking 525 for a complete modified intake manifold. edit ; oups... I thought on their website they did the stock VHR Intake manifold vs their modded one.. but it was the unmodified HR vs their modded one.. I would love to see an actual test with a modified HR vs their VHR ... I would still stand if about an HR modified could be superior 3500-7000whp __________________ Megan Journal Click Me ....................One Man Team Motorsport Click Me Last edited by Megan370z; 01-14-2014 at 10:53 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] VQ37vhr Parts	deep007	Parts for sale (Private Classifieds)	4	10-31-2013 05:49 PM
TSB for oil consumption on the VQ37VHR.	shumby	370Z Technical Service Bulletins (TSB) / Recalls	136	01-23-2013 01:47 AM
Specs of the 3.7L VQ37VHR	admin	Engine & Drivetrain	17	11-12-2012 04:18 PM
GTM Performance Engineering: VQ37VHR Engine Build 700HP Power Package	SAM@GTM	Forced Induction	73	10-12-2012 09:46 AM
One Properly Executed 400hp 1993 FD RX-7	Waiz	Other Vehicles	18	09-01-2011 03:53 PM