Nissan 370Z Forum  

Time for the 10s.

So even if you stopped the suspension from going any further down from the desired point which camber would be perfect for traction? There isn't a way to stop the

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Track / Autocross / Drifting / Dragstrip


Like Tree82Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 09-03-2014, 08:12 PM   #136 (permalink)
Track Member
 
AlexRaymond19's Avatar
 
Join Date: Jun 2011
Location: Maine
Posts: 771
Drives: 2010 Nissan 370z
Rep Power: 14
AlexRaymond19 is on a distinguished road
Default

So even if you stopped the suspension from going any further down from the desired point which camber would be perfect for traction? There isn't a way to stop the suspension travel prematurely?
__________________
2010 370Z Touring MT | Stillen | Motordyne | Momentum| Z1 | Fast Intentions | Advant Garde | RE11 | Swift | SPC | Quaife | Whiteline | Evo R | 322RWHP 259ft-lb Mustang
AlexRaymond19 is offline   Reply With Quote
Old 09-03-2014, 08:37 PM   #137 (permalink)
A True Z Fanatic
 
Join Date: Mar 2009
Location: Chicago
Posts: 3,653
Drives: 370
Rep Power: 944523
phunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond repute
Default

Quote:
Originally Posted by clintfocus View Post
ALL THIS TO COUNTER WHAT IS GOOD WITH THE Z!!!! :P (FlameSuit engaged by Road race guy :P )
I have wondered this entire time if what the alignment is doing is actually the most optimized for road racing or not. I am no road race setup expert, but I think its a conversation worth having.

Could the outside tire be cambering more than the chassis is leaning, and taking rubber off the pavement for no good reason? Perhaps "yes" with a very stiff and flat setup, and "no" with a more stock setup? Or would the answer be "no way not even close"?
Rangerz likes this.
__________________
Charles @ CJ Motorsports : Website | Facebook | Instagram | YouTube
Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph
phunk is offline   Reply With Quote
Old 09-03-2014, 08:39 PM   #138 (permalink)
A True Z Fanatic
 
Join Date: Mar 2009
Location: Chicago
Posts: 3,653
Drives: 370
Rep Power: 944523
phunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond repute
Default

Quote:
Originally Posted by AlexRaymond19 View Post
So even if you stopped the suspension from going any further down from the desired point which camber would be perfect for traction? There isn't a way to stop the suspension travel prematurely?
The desired point is HIGHER (decompressed) than where you started, so you couldnt go down (compress) at all. You would have to take out the shocks and put in solid metal bars and defeat the whole suspension... which would result in an unstable and dangerous car.
__________________
Charles @ CJ Motorsports : Website | Facebook | Instagram | YouTube
Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

Last edited by phunk; 09-03-2014 at 08:41 PM.
phunk is offline   Reply With Quote
Old 09-03-2014, 08:44 PM   #139 (permalink)
A True Z Fanatic
 
wstar's Avatar
 
Join Date: Mar 2009
Location: Houston, TX
Posts: 4,024
Drives: too slow
Rep Power: 3594
wstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond repute
Default

Quote:
Originally Posted by phunk View Post
I have wondered this entire time if what the alignment is doing is actually the most optimized for road racing or not. I am no road race setup expert, but I think its a conversation worth having.

Could the outside tire be cambering more than the chassis is leaning, and taking rubber off the pavement for no good reason? Perhaps "yes" with a very stiff and flat setup, and "no" with a more stock setup? Or would the answer be "no way not even close"?
I think in general the answer is that yes, the 370's suspension is more optimized for road-racing than it is for for drag-racing. Not that it doesn't need tweaking and parts upgrades for road-racing too, but even without those it's generally in the ballpark of doing the right thing. I *want* camber as the rear loads up on weight transfer, because that set of conditions (low-gear + heavy throttle -> weight transfer to rear) only tends to happen during mid-corner through to the exit, where the car is already trying to fly sideways at a full G or more before I even started laying into that throttle pedal.

It seems it would be difficult in general to simultaneously optimize a rear suspension's response for both road-racing and drag-racing.
__________________
7AT Track Car!
Journal thread / Car setup details
wstar is offline   Reply With Quote
Old 09-03-2014, 08:57 PM   #140 (permalink)
A True Z Fanatic
 
Join Date: Mar 2009
Location: Chicago
Posts: 3,653
Drives: 370
Rep Power: 944523
phunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond repute
Default

Quote:
Originally Posted by wstar View Post
I think in general the answer is that yes, the 370's suspension is more optimized for road-racing than it is for for drag-racing. Not that it doesn't need tweaking and parts upgrades for road-racing too, but even without those it's generally in the ballpark of doing the right thing. I *want* camber as the rear loads up on weight transfer, because that set of conditions (low-gear + heavy throttle -> weight transfer to rear) only tends to happen during mid-corner through to the exit, where the car is already trying to fly sideways at a full G or more before I even started laying into that throttle pedal.

It seems it would be difficult in general to simultaneously optimize a rear suspension's response for both road-racing and drag-racing.
I agree that the setup is much more optimized for road racing than drag racing. But I believe you misread my question you quoted. Simplified: does the 370z camber too much during compression *even* for road racing? Or maybe with some setups "yes" and some setups "no". There has to be a point where its too much, I am wondering if the 370z could have crossed that line in some applications, or is it not even close to being too much? Could adjusting the control arm nodes to reduce compression camber slightly even aid a road race 370z that wants a lot of compression camber?
Rangerz likes this.
__________________
Charles @ CJ Motorsports : Website | Facebook | Instagram | YouTube
Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

Last edited by phunk; 09-03-2014 at 09:03 PM.
phunk is offline   Reply With Quote
Old 09-03-2014, 09:05 PM   #141 (permalink)
Track Member
 
Super Werty's Avatar
 
Join Date: Jul 2013
Location: AZ
Posts: 668
Drives: '13 Sport
Rep Power: 12
Super Werty is just really niceSuper Werty is just really niceSuper Werty is just really niceSuper Werty is just really niceSuper Werty is just really nice
Send a message via ICQ to Super Werty
Default

might be easier to swap in a live axle and let er rip
phunk likes this.
__________________
The Build
Super Werty is offline   Reply With Quote
Old 09-03-2014, 10:26 PM   #142 (permalink)
Track Member
 
clintfocus's Avatar
 
Join Date: Jan 2011
Location: los angeles
Age: 38
Posts: 933
Drives: 370z, EK Civic, F150
Rep Power: 15
clintfocus will become famous soon enough
Default

Quote:
Originally Posted by phunk View Post
I have wondered this entire time if what the alignment is doing is actually the most optimized for road racing or not. I am no road race setup expert, but I think its a conversation worth having.

Could the outside tire be cambering more than the chassis is leaning, and taking rubber off the pavement for no good reason? Perhaps "yes" with a very stiff and flat setup, and "no" with a more stock setup? Or would the answer be "no way not even close"?
Quote:
Originally Posted by phunk View Post
I agree that the setup is much more optimized for road racing than drag racing. But I believe you misread my question you quoted. Simplified: does the 370z camber too much during compression *even* for road racing? Or maybe with some setups "yes" and some setups "no". There has to be a point where its too much, I am wondering if the 370z could have crossed that line in some applications, or is it not even close to being too much? Could adjusting the control arm nodes to reduce compression camber slightly even aid a road race 370z that wants a lot of compression camber?
the heavy camber curve under compression is an advatange for road race setups IF (heavy emphasis on the "IF") you can get the rear negative camber reduced enough. YES there is a point where its to much camber, but if you can set it up right at static (which can be verified by tire temps), then you can have a setup that has good longitude traction from the minimal static negative camber, but then camber's in enough during cornering. so yes it can work fantastic if your static settings are correct.
phunk and Rangerz like this.
clintfocus is offline   Reply With Quote
Old 09-03-2014, 10:36 PM   #143 (permalink)
A True Z Fanatic
 
Join Date: Mar 2009
Location: Chicago
Posts: 3,653
Drives: 370
Rep Power: 944523
phunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond repute
Default

I ask because if I keep the car much longer, we have played around with the idea of a custom rear crossmember. We could then change the curve by using custom control arm lengths, or possibly a few different positions. If it would only cater to drag racing, then I would figure on building just one, in which cause would be easier to fabricate and modify off the stock one. But if there was benefits to be found for the much more common road course racers here, then it could possibly justify a full custom rear crossmember. But it sounds like you guys are plenty happy with how it is already.
G37Sam likes this.
__________________
Charles @ CJ Motorsports : Website | Facebook | Instagram | YouTube
Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph
phunk is offline   Reply With Quote
Old 09-04-2014, 02:44 PM   #144 (permalink)
A True Z Fanatic
 
wstar's Avatar
 
Join Date: Mar 2009
Location: Houston, TX
Posts: 4,024
Drives: too slow
Rep Power: 3594
wstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond reputewstar has a reputation beyond repute
Default

My rear static/dynamic camber ends up doing the right thing on the outside wheel. It gets a little iffy on the inside wheel, but I suspect I'm going to iron that out over the next two events. This weekend I'm trying just a downgrade to the stock rear sway, and then for the next event I'll probably be upping my spring rates all around (but esp in front) to reduce body roll. Depending on lots of things, I'm not sure which rear bar I'll end up running with the stiffer springs. But either way, I don't think we need a major geometry change in the rear for road racing.
phunk likes this.
__________________
7AT Track Car!
Journal thread / Car setup details
wstar is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Long time member, first time poster - Finally bought a Z Shoemanfoo New 370Z Owner 4 02-24-2014 05:00 PM
Long time admirer first time owner Jersey370Z New Forum Member 9 03-18-2013 10:50 AM
Does anyone's transmission clunk from time to time when pushing the clutch in?? chitown1863 Engine & Drivetrain 21 04-13-2010 08:22 AM
Long time Lurker...first time poster cuzzinz New Forum Member 5 01-26-2010 01:24 PM
First time owner - long time admirer ZCarGo New 370Z Owner 15 03-20-2009 02:25 PM


All times are GMT -5. The time now is 08:39 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2