Need autox alignment suggestion/specs: 285/35 19" Sq. tires, stock suspension

Rangerz

I think the same can be said for camber and caster. I think your spliting hairs over an exact number. If I had a garage at the track I would be all over changing this and that and finding the optimum settings. In my case I went zero toe front and rear. The front felt fine but, the rear was loose big time. So I knew I wanted some toe in but, due to tire wear issues wanted less toe in than factory spec. After this weekend at the track and for my level I feel I have a hellva well balanced Z. Now othesr run zero toe in the rear and feel the same about thier Z.

I think to get what I think your looking for you will have to find someone running the same tires, suspension, spacers/no spacers, sway bars, etc... Not sure what type of setup your looking for track, auto x, drag strip but go with zero if that feels like crap a little toe in as you think will help.

__________________
Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY