Steering lock problem solved (for real)

kenchan · 06-01-2012, 02:18 PM

Quote:

Originally Posted by KingZee

Hey guys, pulled the fuse yesterday and although everything is working as it should I noticed something that's happening intermittently after pulling the fuse. When I get in the car and I haven't started it in a while I press the button and it seems to take about 5 seconds before starting up...the first time it happened I thought the button press hadn't registered and as I was reaching to press it again the car started.

It's important to note this doesn't happen all the time. If I turn the car off immediately after turning it on then turn it on again it starts up immediately. It seems like the computer is looking to unlock the steering but doesn't get a response immediately so it waits and starts up when it figures out there's nothing there. I don't get why it wouldn't happen all the time though in that case.

Anyway, I don't really have a big problem with this as long as I know that's how it is. Would rather deal with that then being stranded on the road. Just wondering if anyone else has experienced this yet?

keep us posted, KingZee!

ive not done either (fuse or brown wire snip) yet since i have two working steering locks.

kenchan · 06-01-2012, 02:19 PM

Quote:

Originally Posted by Nick911sc

Money had already been sent and item shipped... No harm, no foul.

you're a good guy, nick!

hell, if i ordered the harness (which i didn't) i would've paid the guy too.

KingZee · 06-01-2012, 02:23 PM

Quote:

Originally Posted by SPOHN

^^ I had the same thing happen

This takes my suspicion that it's the fuse from 70% to 99%...anyone else?

Would be interesting to see if the wire harness causes the same issue or not although this would still be the better solution for me.

Baer383 · 06-01-2012, 02:33 PM

Quote:

Originally Posted by KingZee

This takes my suspicion that it's the fuse from 70% to 99%...anyone else?

Would be interesting to see if the wire harness causes the same issue or not although this would still be the better solution for me.

If it was a electrical issue it would have happened from the get go.

Instead of waiting to see if anyone else has a problem why don't you put the fuse back in.

Baer383 · 06-01-2012, 02:35 PM

Dia has been driving his around from day one without the fuse and he doesn't have a problem he would have called me.

KingZee · 06-01-2012, 02:46 PM

Quote:

Originally Posted by Baer383

Dia has been driving his around from day one without the fuse and he doesn't have a problem he would have called me.

It's not really an electrical problem it just lags on start sometimes...Spohn already said it happened to him too. I'm getting ready to leave town so no time to deal with the fuse right now. Plus I don't really wanna take the plastic crap apart again to get the box out. Somewhat of a pia. If no one else reports I'll put it back next week to see if the issue goes away.

zero · 06-01-2012, 02:58 PM

Quote:

Originally Posted by KingZee

It's not really an electrical problem it just lags on start sometimes...Spohn already said it happened to him too. I'm getting ready to leave town so no time to deal with the fuse right now. Plus I don't really wanna take the plastic crap apart again to get the box out. Somewhat of a pia. If no one else reports I'll put it back next week to see if the issue goes away.

It's very easy to do.

Baer383 · 06-01-2012, 03:17 PM

Quote:

Originally Posted by KingZee

It's not really an electrical problem it just lags on start sometimes...Spohn already said it happened to him too. I'm getting ready to leave town so no time to deal with the fuse right now. Plus I don't really wanna take the plastic crap apart again to get the box out. Somewhat of a pia. If no one else reports I'll put it back next week to see if the issue goes away.

If Chris(SPOHN)had this problem he would have called me.

jetguy · 06-01-2012, 03:29 PM

My Z sits for 3 or 4 days every week. Let's see if this effects me.......

wheee! · 06-01-2012, 03:37 PM

I've had the lag or delay too, but I find most of the time it is because I haven't quite got the clutch pushed right to the floor. Not a big issue either way. I would rather have a delayed start than no start!

A side benefit to this mod was discovered today! I was removing the front bumper to adjust my temp sensor position from behind the oil cooler and I had to turn the wheels to unscrew the wheel well screw.... all I had to do was turn the wheels by hand (I was on jackstands)! No starting the car or accessory position and cranking the wheel to move the tires! yay!

jetguy · 06-01-2012, 03:40 PM

No issues after sitting for 4 days!:-)

wheee! · 06-01-2012, 03:47 PM

I would like to know if this delay issue has affected anyone with an auto transmission... might just be a manual glitch.

jetguy · 06-01-2012, 03:50 PM

Mines a 7at

KingZee · 06-01-2012, 04:27 PM

Quote:

Originally Posted by Baer383

If Chris(SPOHN)had this problem he would have called me.

Lol he said he did a few posts back

Baer383 · 06-01-2012, 04:42 PM

Quote:

Originally Posted by KingZee

Lol he said he did a few posts back

I just talk to him on the phone he said it happened when he hit the start button fast and it only happened once.

06-01-2012, 02:35 PM	#155 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	Dia has been driving his around from day one without the fuse and he doesn't have a problem he would have called me. __________________ 2013 ZL1 754 rwhp 747 rwtq

06-01-2012, 03:29 PM	#159 (permalink)
jetguy Enthusiast Member Join Date: Apr 2010 Location: atlanta Posts: 311 Drives: 370z Rep Power: 15	My Z sits for 3 or 4 days every week. Let's see if this effects me....... __________________ Z1 intake tubes,K&N,sprint booster,side stripes,9500ix, blendmount,laser jammers,AVIC-X920BT,TS-C720PRS, PRS2200DT,2x BTA6250D,275/40/18 conti dw, dynamat,reversed the +/- on the floor shift,tint,cover

06-01-2012, 03:37 PM	#160 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40181	I've had the lag or delay too, but I find most of the time it is because I haven't quite got the clutch pushed right to the floor. Not a big issue either way. I would rather have a delayed start than no start! A side benefit to this mod was discovered today! I was removing the front bumper to adjust my temp sensor position from behind the oil cooler and I had to turn the wheels to unscrew the wheel well screw.... all I had to do was turn the wheels by hand (I was on jackstands)! No starting the car or accessory position and cranking the wheel to move the tires! yay! __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

06-01-2012, 03:40 PM	#161 (permalink)
jetguy Enthusiast Member Join Date: Apr 2010 Location: atlanta Posts: 311 Drives: 370z Rep Power: 15	No issues after sitting for 4 days!:-) __________________ Z1 intake tubes,K&N,sprint booster,side stripes,9500ix, blendmount,laser jammers,AVIC-X920BT,TS-C720PRS, PRS2200DT,2x BTA6250D,275/40/18 conti dw, dynamat,reversed the +/- on the floor shift,tint,cover

06-01-2012, 03:47 PM	#162 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40181	I would like to know if this delay issue has affected anyone with an auto transmission... might just be a manual glitch. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

06-01-2012, 03:50 PM	#163 (permalink)
jetguy Enthusiast Member Join Date: Apr 2010 Location: atlanta Posts: 311 Drives: 370z Rep Power: 15	Mines a 7at __________________ Z1 intake tubes,K&N,sprint booster,side stripes,9500ix, blendmount,laser jammers,AVIC-X920BT,TS-C720PRS, PRS2200DT,2x BTA6250D,275/40/18 conti dw, dynamat,reversed the +/- on the floor shift,tint,cover

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Those of you who have had Steering Lock Failure	Thechidz	Nissan 370Z General Discussions	449	01-12-2013 05:05 PM
Fuel Starvation Problem Solved?	ResIpsa	Track / Autocross / Drifting / Dragstrip	7	03-01-2012 05:50 PM
Steering lock repair	fritz	DIY Section (Do-It-Yourself)	38	02-22-2012 09:30 PM
steering wheel lock	rosankyslim	Exterior & Interior	4	01-19-2012 03:43 PM
Rear hatch release problem solved!	BluZ	Australia/New Zealand	8	05-22-2010 01:42 AM