Nismo Splitter

NismoNox · 06-15-2014, 12:55 PM

Well not really, it's a Top 1 Motors Flat DC5 Splitter

Xplicit97 · 06-19-2014, 12:54 AM

The splitter with the winglets doesn't fit?

Wonka2581 · 06-19-2014, 03:17 AM

I think it looks good!!

Sent from my iPhone using Tapatalk

NismoNox · 06-19-2014, 07:15 AM

Quote:

Originally Posted by Xplicit97

The splitter with the winglets doesn't fit?

The only way I can get those winglets on there, is to drill and screw them on or super super glue them under the Splitter. I can try that if anyone would like to see how it comes out. Other than that, I don't need these winglets lol

95N3RD · 06-19-2014, 10:54 AM

I'm assuming this is the type 3 you have on your car?

NismoNox · 06-19-2014, 11:53 AM

Quote:

Originally Posted by 95N3RD

I'm assuming this is the type 3 you have on your car?

Yes! I don't recommend the first two because the fin will be hitting the bumper a lot, like it rattles.

It's a good deal, $125 Free Shipping

w4kj4k · 06-19-2014, 12:06 PM

Looks really good! Any more angles with better lighting?

Also did you have to purchase those rods separately?

NismoNox · 06-19-2014, 12:14 PM

Quote:

Originally Posted by w4kj4k

Looks really good! Any more angles with better lighting?

Also did you have to purchase those rods separately?

I'll take some more today with and without the Winglets.

I did have to buy the Rods, they're 10-10.75in and cost around $80-$95. They're not needed unless you a reckless driver lol or you hit the track.

NismoNox · 06-20-2014, 08:06 AM

As Requested

NismoNox · 06-20-2014, 08:07 AM

Top view

NismoNox · 06-20-2014, 08:09 AM

I have more on my photo album

1cleanZ · 06-20-2014, 09:59 AM

Looks good, and give you credit for trying something new.

1. Obviously its a bit short from the sides as it looks like you're about a good 1"-2" from the rear of the bumper.

2. Any clearer shots from the front? Did you do anything to fill the area where the Nismo front raises up? From your albums, it appears you pulled the splitter up to bend upward? Doesn't this defeat the actual purpose behind having a splitter? (downforce, pulling the front of the car DOWN. By having the front of the splitter pulled upward, you're actually reversing the purpose and creating upforce/lifting the front)

3. I'm also interested to see where your connection points are for the rods. What is the material of this particular splitter?///found my answer

Very good reasonings for my questions, I assure you

Thank you!

1cleanZ · 06-20-2014, 10:06 AM

N'm on the material...looked up the site to see they are ABS plastic. Any photos of mounting points underneath?

NismoNox · 06-20-2014, 01:59 PM

Quote:

Originally Posted by 1cleanZ

Looks good, and give you credit for trying something new.

1. Obviously its a bit short from the sides as it looks like you're about a good 1"-2" from the rear of the bumper.

2. Any clearer shots from the front? Did you do anything to fill the area where the Nismo front raises up? From your albums, it appears you pulled the splitter up to bend upward? Doesn't this defeat the actual purpose behind having a splitter? (downforce, pulling the front of the car DOWN. By having the front of the splitter pulled upward, you're actually reversing the purpose and creating upforce/lifting the front)

3. I'm also interested to see where your connection points are for the rods. What is the material of this particular splitter?///found my answer

Very good reasonings for my questions, I assure you

Thank you!

Happy to answer your questions

They are short on the sides by 2 inches or less, keep in mind that this splitter isn't intended for a Nismo.

I did my best to do the fitment right, I used 3M double Sided tape to block of a small gap it left. Now the rods are only there for my drive around the city as there is many bumps and driveways where the splitter drags so I tighten it really well and that's why you see it lifted. When I have the rods off or lose, the splitter hold straight for downforce, of course I wouldn't buy this if it weren't for that. It was mostly custom work but we figured to bolt where the straightest part of the splitter was so we don't get that rise as you know the undertray has that effect.

1cleanZ · 10-22-2014, 09:30 AM

06-19-2014, 12:54 AM	#2 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 299	The splitter with the winglets doesn't fit? cdoxp800 likes this. __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

06-19-2014, 03:17 AM	#3 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2611	I think it looks good!! Sent from my iPhone using Tapatalk NismoNox likes this. __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

06-19-2014, 10:54 AM	#5 (permalink)
95N3RD Base Member Join Date: Dec 2012 Location: where there is food Posts: 103 Drives: from point A to B Rep Power: 12	I'm assuming this is the type 3 you have on your car? __________________ Nissan 370Z Nismo: Kinda stock at 328 whp SOLD Lexus IS-F: Daily gas guzzler

06-20-2014, 08:09 AM	#11 (permalink)
NismoNox Base Member Join Date: Dec 2013 Location: Los Angeles Posts: 243 Drives: 12 NISMO 370z #0277 Rep Power: 11	I have more on my photo album __________________ \| #SoCalZ \| StrictlyGZ \| Pro1 Performance \| Zociety

06-20-2014, 09:59 AM	#12 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 20	Looks good, and give you credit for trying something new. 1. Obviously its a bit short from the sides as it looks like you're about a good 1"-2" from the rear of the bumper. 2. Any clearer shots from the front? Did you do anything to fill the area where the Nismo front raises up? From your albums, it appears you pulled the splitter up to bend upward? *Doesn't this defeat the actual purpose behind having a splitter?* (downforce, pulling the front of the car DOWN. By having the front of the splitter pulled upward, you're actually reversing the purpose and creating upforce/lifting the front) 3. I'm also interested to see where your connection points are for the rods. What is the material of this particular splitter?///found my answer Very good reasonings for my questions, I assure you Thank you! __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel Last edited by 1cleanZ; 06-20-2014 at 10:12 AM.

06-19-2014, 12:06 PM	#7 (permalink)
w4kj4k Base Member Join Date: Nov 2010 Location: Oklahoma City Posts: 220 Drives: 2012 PW Nismo Rep Power: 14	Looks really good! Any more angles with better lighting? Also did you have to purchase those rods separately?

06-20-2014, 10:06 AM	#13 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 20	N'm on the material...looked up the site to see they are ABS plastic. Any photos of mounting points underneath? __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel

10-22-2014, 09:30 AM	#15 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 20	LMBmikeZ, God-Speed and sillyoldtayo like this. __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast intentions exhaust, stillen gen 3 intakes, nismo bumper/splitter	dirTy_shoeZ	Parts for sale (Private Classifieds)	19	01-13-2014 02:52 PM
[FOR SALE] Nismo front oem brand new with splitter. $600	dirTy_shoeZ	Parts for sale (Private Classifieds)	36	12-31-2013 09:54 AM
Nismo Front Splitter?	scruffydog	Exterior & Interior	35	03-29-2013 06:36 PM
Stillen splitter/ Nismo sides/ Shines Rear	370Zfeeler	Exterior & Interior	4	03-21-2012 02:17 PM