Joepro's Journal

nismo 1234 · 02-01-2013, 05:09 PM

i wish i was a mechanic and a MBA grad. that is really impressive!!

hows the new clutch??

Joepro · 02-01-2013, 06:46 PM

Not a mechanic by an stretch of the imagination just a self taught DIYer with access to a shop and tools! The Wheels are at the powder coaters as well as the intake tubes,so it is not going anywhere for a while. I am going to Florida for 5 days to visit my Grandparents starting tomorrow, when I come back the wheels will be done, but the oil cooler and rotors will go on then back into storage till spring, just wanted to get this stuff out of the way so I do not was precious spring time!

Joepro · 02-01-2013, 06:53 PM

South bend clutch knob, haven't driven with it yet, but it has a nice weight increase!

Joepro · 02-02-2013, 11:46 AM

started it up and the clutch works haha.

Joepro · 02-08-2013, 06:40 PM

Got my wheels and intake tube back from the powder coaters. Still have to put on my R1 Concepts rotors, so I mounted the tires and threw them on just to see how it will look.

nismo 1234 · 02-10-2013, 12:22 PM

nice and clean!!

Joepro · 02-11-2013, 11:30 PM

Finished up all my recent mods, did the stillen oil cooler today, mounted my r1 concepts slotted rotors and remounted my newly powder coated wheels with pained lugs and dipped center caps...it was a good day for the girl!

Joepro · 03-26-2013, 07:44 PM

Kelly hood dampers and M370 manifold! This give the low end intake growl the car was missing! Cant get on it too much, only 150 miles on the new clutch, but the mid range feels strong! Taken before the strut bar and cover went back on, it does fit.

I was not thrilled with the solution of the manifold sensor by motordyne, so I used a little pvc adhesive to hold it in secure.

Joepro · 04-13-2013, 06:15 PM

Installed Koni yellows! These things are FANTASTIC!

eshuang · 04-13-2013, 07:15 PM

Nice, looks good! Can you take a side profile with the Koni's? Do you think they lowered the car a bit more?

Joepro · 04-13-2013, 07:21 PM

I will snap one tomorrow, they should not have, they are manufactured to be stock replacements as far as I know.

Joepro · 04-23-2013, 09:14 PM

My buddy just got a new nikon, so he used my Z for practice today!

Jerggy13 · 04-23-2013, 09:39 PM

What are your impressions of the Koni's vs. stock shocks?

Joepro · 04-23-2013, 09:48 PM

There isn't one, everyone running stock shocks is not aware of hwo bad their car handles.

Swift springs review!!!!!

nmjaxx9 · 04-23-2013, 10:31 PM

Lookin good dude!!

02-01-2013, 06:46 PM	#62 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Not a mechanic by an stretch of the imagination just a self taught DIYer with access to a shop and tools! The Wheels are at the powder coaters as well as the intake tubes,so it is not going anywhere for a while. I am going to Florida for 5 days to visit my Grandparents starting tomorrow, when I come back the wheels will be done, but the oil cooler and rotors will go on then back into storage till spring, just wanted to get this stuff out of the way so I do not was precious spring time! __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-01-2013, 06:53 PM	#63 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	South bend clutch knob, haven't driven with it yet, but it has a nice weight increase! __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 02-01-2013 at 06:59 PM.

02-02-2013, 11:46 AM	#64 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	started it up and the clutch works haha. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 02-02-2013 at 11:49 AM.

02-08-2013, 06:40 PM	#65 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Got my wheels and intake tube back from the powder coaters. Still have to put on my R1 Concepts rotors, so I mounted the tires and threw them on just to see how it will look. Mr&Mrs and MiStR.NGuYeN like this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-11-2013, 11:30 PM	#67 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Finished up all my recent mods, did the stillen oil cooler today, mounted my r1 concepts slotted rotors and remounted my newly powder coated wheels with pained lugs and dipped center caps...it was a good day for the girl! Mr&Mrs likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 02-11-2013 at 11:36 PM.

02-01-2013, 05:09 PM	#61 (permalink)
nismo 1234 Track Member Join Date: May 2010 Location: Canada BC Posts: 501 Drives: 10 370z M6 40th Rep Power: 15	i wish i was a mechanic and a MBA grad. that is really impressive!! hows the new clutch??

02-10-2013, 12:22 PM	#66 (permalink)
nismo 1234 Track Member Join Date: May 2010 Location: Canada BC Posts: 501 Drives: 10 370z M6 40th Rep Power: 15	nice and clean!!

03-26-2013, 07:44 PM	#68 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Kelly hood dampers and M370 manifold! This give the low end intake growl the car was missing! Cant get on it too much, only 150 miles on the new clutch, but the mid range feels strong! Taken before the strut bar and cover went back on, it does fit. I was not thrilled with the solution of the manifold sensor by motordyne, so I used a little pvc adhesive to hold it in secure. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-13-2013, 06:15 PM	#69 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Installed Koni yellows! These things are FANTASTIC! __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-13-2013, 07:15 PM	#70 (permalink)
eshuang Base Member Join Date: Jun 2012 Location: San Jose Posts: 46 Drives: S2000 Rep Power: 12	Nice, looks good! Can you take a side profile with the Koni's? Do you think they lowered the car a bit more?

04-13-2013, 07:21 PM	#71 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	I will snap one tomorrow, they should not have, they are manufactured to be stock replacements as far as I know. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-23-2013, 09:14 PM	#72 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	My buddy just got a new nikon, so he used my Z for practice today! Mr&Mrs likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 04-23-2013 at 10:36 PM.

04-23-2013, 09:39 PM	#73 (permalink)
Jerggy13 Track Member Join Date: Mar 2011 Location: St. Louis, MO Posts: 517 Drives: with 6 TB's Rep Power: 375	What are your impressions of the Koni's vs. stock shocks? __________________ Changes come. Keep your dignity. Take the high road. Take it like a man. Momma Sed Like the rain. Like a kidney stone. Its just a broken heart, son. This pain will pass away.

04-23-2013, 09:48 PM	#74 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	There isn't one, everyone running stock shocks is not aware of hwo bad their car handles. Swift springs review!!!!! __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-23-2013, 10:31 PM	#75 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 25	Lookin good dude!! Joepro likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
sixpax Journal	sixpax	Member's 370Z Gallery	231	02-09-2017 04:38 PM
Dembflyr's Journal	Dembflyr	Member's 370Z Gallery	75	09-18-2016 11:44 PM
windex's Journal	windex	Member's 370Z Gallery	74	05-29-2013 11:24 AM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM