Rusty's Nismo Journal

KaienZ34 · 07-13-2012, 10:47 AM

Did you have a chance it have your nismo RC ducts installed, i'd love to see pics?

Rusty · 07-17-2012, 12:42 PM

Quote:

Originally Posted by KaienZ34

Did you have a chance it have your nismo RC ducts installed, i'd love to see pics?

Not yet. Waiting for a few others things. Then do all at one time.

Rusty · 07-17-2012, 12:49 PM

Did a dyno run today. This is with the FI LTH's, 12" resonators, and CBE, Stillen G3 CAI. Thought I would get more out of it. But.............it sounds good.

Corr. HP 294, and Corr. Torque 234. I need a tune. A/F Bounced all over the place. Picked up 12HP and 4lbs of torque.

Click on picture for video.

Rusty · 07-17-2012, 01:22 PM

Here's the dyno sheet.

Rusty · 07-31-2012, 02:08 AM

Got my 4" to 2" reducers for my brake ducts. This is what I needed to adapt the 4" Nismo ducts the the 2" hose that is in the Stillen brake cooling kit. Which should be here tomorrow. I have to machine down alittle OD on the 4" side of the reducer so that it slides into the brake duct, shortening the overall length.

Rusty · 07-31-2012, 02:12 AM

My ZSpeed Aluminum Under Pan Diffuser came in too. I'll install it when I do my brake duct install. I like to do everything at once.

Unique_Z · 07-31-2012, 09:07 AM

Quote:

Originally Posted by Rusty

My ZSpeed Aluminum Under Pan Diffuser came in too. I'll install it when I do my brake duct install. I like to do everything at once.

Nice!

gurneyeagle · 06-16-2013, 12:26 PM

Quote:

Originally Posted by Rusty

Got my 4" to 2" reducers for my brake ducts. This is what I needed to adapt the 4" Nismo ducts the the 2" hose that is in the Stillen brake cooling kit. Which should be here tomorrow. I have to machine down alittle OD on the 4" side of the reducer so that it slides into the brake duct, shortening the overall length.

Hi Rusty - Great build!

I'm getting ready to install a set of brake ducts and am wondering where you got the 4" to 2" reducers.

Thanks!

Rusty · 06-16-2013, 03:07 PM

Quote:

Originally Posted by gurneyeagle

Hi Rusty - Great build!

I'm getting ready to install a set of brake ducts and am wondering where you got the 4" to 2" reducers.

Thanks!

Thanks.

Here you go. I had to machine down the big end to fit inside the brake duct.

Woodstock D4250 4-Inch to 2-Inch Reducer - Amazon.com

07-13-2012, 10:47 AM	#1 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Did you have a chance it have your nismo RC ducts installed, i'd love to see pics? Rusty likes this. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

07-17-2012, 12:49 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,504 Drives: 2011 Nismo GM 6M Rep Power: 2684439	Did a dyno run today. This is with the FI LTH's, 12" resonators, and CBE, Stillen G3 CAI. Thought I would get more out of it. But.............it sounds good. Corr. HP 294, and Corr. Torque 234. I need a tune. A/F Bounced all over the place. Picked up 12HP and 4lbs of torque. Click on picture for video. chknhawk and diesel11679 like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 07-17-2012 at 12:51 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
birdmanx1's Nismo Journal ...	birdmanx1	Member's 370Z Gallery	441	10-20-2012 03:47 PM
TROOPER's 370Z NISMO Journal	TROOPER	Member's 370Z Gallery	124	07-29-2011 09:17 AM
[Equinox] Nismo dyno progression journal	Equinox	Engine & Drivetrain	3	02-17-2011 03:11 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM