Madwi's picture dump and crap

gbrettin · 10-24-2022, 08:08 AM

I know for a fact there are construction pictures of the Y pipe and a few forum members helping out.

madwi · 10-24-2022, 06:14 PM

Quote:

Originally Posted by gbrettin

I know for a fact there are construction pictures of the Y pipe and a few forum members helping out.

Who do you think I am? Gbrettin? documenting everything...

vtec to vvel · 10-24-2022, 09:15 PM

Quote:

Originally Posted by madwi

Who do you think I am? Gbrettin? documenting everything...

Bro.....can I bring my car by to your shop for the CSC/MC replacement?

madwi · 10-25-2022, 06:14 PM

Quote:

Originally Posted by vtec to vvel

Bro.....can I bring my car by to your shop for the CSC/MC replacement?

Sure, Ill tell Bill and others that there is free beer and then you can put them to work.

Rusty · 10-25-2022, 06:18 PM

Quote:

Originally Posted by madwi

Sure, Ill tell Bill and others that there is free beer and then you can put them to work.

You forgot the pizza.

madwi · 10-24-2022, 06:16 PM

Odered a Zele rear bumper cover too.

gbrettin · 10-25-2022, 08:38 AM

You forgot one picture. lol. Picture shows how the vbands line up perfectly and is being locked with no clamps AND the next attack angle. The merge angle was opened up to direct a pipe off.

madwi · 10-25-2022, 06:13 PM

Let me reiterate, who do you think I am, Gbrettin?

madwi · 10-29-2022, 05:24 PM

madwi · 10-29-2022, 05:25 PM

Bought an LS motor to play with.

BettyZ · 10-29-2022, 09:49 PM

July 2023 - "Hey Carp, how would you use this crowbar to open the LS crate?"

madwi · 11-01-2022, 08:15 PM

gbrettin · 11-01-2022, 09:57 PM

" gb welds janky af for sure" Gesh.... cross thread action.

madwi · 11-03-2022, 06:01 PM

gbrettin · 11-03-2022, 07:49 PM

It's about to go down!

10-25-2022, 08:38 AM	#7 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,303 Drives: Tricycle Rep Power: 589152	You forgot one picture. lol. Picture shows how the vbands line up perfectly and is being locked with no clamps AND the next attack angle. The merge angle was opened up to direct a pipe off. Last edited by gbrettin; 10-25-2022 at 08:40 AM.

10-29-2022, 09:49 PM	#11 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: USA Age: 39 Posts: 5,264 Drives: A Garage Queen Rep Power: 2684372	July 2023 - "Hey Carp, how would you use this crowbar to open the LS crate?" __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 10:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 09:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 04:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 08:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 10:45 AM

10-24-2022, 08:08 AM	#1 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,303 Drives: Tricycle Rep Power: 589152	I know for a fact there are construction pictures of the Y pipe and a few forum members helping out.

10-24-2022, 06:16 PM	#6 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684430	Odered a Zele rear bumper cover too.

10-25-2022, 06:13 PM	#8 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684430	Let me reiterate, who do you think I am, Gbrettin?

10-29-2022, 05:24 PM	#9 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684430

10-29-2022, 05:25 PM	#10 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684430	Bought an LS motor to play with.

11-01-2022, 08:15 PM	#12 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684430

11-01-2022, 09:57 PM	#13 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,303 Drives: Tricycle Rep Power: 589152	" gb welds janky af for sure" Gesh.... cross thread action.

11-03-2022, 06:01 PM	#14 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684430

11-03-2022, 07:49 PM	#15 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,303 Drives: Tricycle Rep Power: 589152	It's about to go down!