The New “What did you do with your Z today” (with off topic replies) XXXIV

JARblue · 11-18-2019, 08:20 AM

In the past several days I've had several people tell me not to bother with the ATI damper. The tolerances are extremely tight (too tight, frankly, I'm told) and can sometimes make it damn near impossible to install on the crank. It's just a damper; it's not really prone to failure. So why bother I guess is the thinking...

Anyone else seen or heard similar things on the ATI dampers?

JARblue · 11-18-2019, 08:24 AM

Kevin estimated $1200-1400 for engine work (oil galley gaskets and oil pump gears), but the estimate includes parts. I expect I'll spend closer to $1500 by the time I add in a few extra tasks for him while the front timing cover is off.

Gonna look to drop the Z off with him in a couple of months. Early Jan would be ideal, but the goal is to get that work done before my birthday in early Feb so I can take it out that week.

Ghostvette · 11-18-2019, 08:29 AM

Quote:

Originally Posted by jwick

I could really use a diagram to understand what the finished product is going to look like.

I'm not sure, but I think all the diagonal stuff is support until all the sides are up and he starts tying it all together. I think I'd have poured a 6" slab and bolted the sides to that. It would give me some support for a lift.....

onzedge · 11-18-2019, 08:30 AM

jchammond · 11-18-2019, 08:32 AM

I’m bout to get up (again), woke up around 7:15 & it was raining

went back to bed...gonna try it again

jchammond · 11-18-2019, 08:32 AM

Quote:

Originally Posted by BettyZ

God, I hope not. You would be an absolutely terrifying female.

Sent from my SM-G955U using Tapatalk

Transition from couch to bed

JARblue · 11-18-2019, 08:34 AM

Quote:

Originally Posted by jwick

I just can’t picture the final product.

It's going to look like a garage

jchammond · 11-18-2019, 08:35 AM

I may get a couple hours to piddle outside before getting ready for work

jchammond · 11-18-2019, 08:36 AM

Morning Folks

redondoaveb · 11-18-2019, 09:39 AM

....

jwick · 11-18-2019, 10:52 AM

Quote:

Originally Posted by Rusty

Was thinking of a footer with one row of block, 12 thick gravel bed inside, then capped with 8" 5000 psi concrete with rebar.

My parking area around the front of the house is 6" thick, 5000 psi concrete with rebar, sitting on 12" thick gravel bed. And that's 50 yards of concrete.

There’s no impact if your driveway heaves other than cosmetic. If your garage heaves if could have some major issues. Especially if it doesn’t displace evenly throughout.

On the design. I assume you are referring to footer interchangeably with what I’m calling chain wall. You are probably on the right path. Just remember there is such a thing as too much rebar. The concrete code has both a Amin and Amax for steel area in a slab.

Rusty · 11-18-2019, 11:41 AM

Quote:

Originally Posted by Ghostvette

I'm going to the Dec 7th show in KC.

This year we are on one of the side sections off the floor. Floor seats are great, but when they do stuff at the back of the arena, it's hard to see it....

I got seats straight back from the stage. Up a couple of rows.

FPenvy · 11-18-2019, 11:43 AM

sitting here just waiting to be walked out on my last day of work lol

JARblue · 11-18-2019, 11:47 AM

Quote:

Originally Posted by FPenvy

sitting here just waiting to be walked out on my last day of work lol

Don't go quietly!!

Spooler · 11-18-2019, 11:48 AM

Quote:

Originally Posted by FPenvy

sitting here just waiting to be walked out on my last day of work lol

That sucks.

11-18-2019, 08:20 AM	#3976 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	In the past several days I've had several people tell me not to bother with the ATI damper. The tolerances are extremely tight (too tight, frankly, I'm told) and can sometimes make it damn near impossible to install on the crank. It's just a damper; it's not really prone to failure. So why bother I guess is the thinking... Anyone else seen or heard similar things on the ATI dampers? __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-18-2019, 08:24 AM	#3977 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Kevin estimated $1200-1400 for engine work (oil galley gaskets and oil pump gears), but the estimate includes parts. I expect I'll spend closer to $1500 by the time I add in a few extra tasks for him while the front timing cover is off. Gonna look to drop the Z off with him in a couple of months. Early Jan would be ideal, but the goal is to get that work done before my birthday in early Feb so I can take it out that week. God-Speed, Rusty, old guy and 1 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-18-2019, 08:30 AM	#3979 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684737	JARblue, Rusty, sx moneypit and 3 others like this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

11-18-2019, 08:32 AM	#3980 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	I’m bout to get up (again), woke up around 7:15 & it was raining went back to bed...gonna try it again Rusty and redondoaveb like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

11-18-2019, 08:35 AM	#3983 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	I may get a couple hours to piddle outside before getting ready for work old guy and redondoaveb like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

11-18-2019, 08:36 AM	#3984 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Morning Folks God-Speed, sx moneypit, old guy and 1 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 10:10 PM
The New "What did you do with your Z today" (with off topic replies) XXIV	JARblue	The Lounge (Off Topic)	10059	08-17-2016 12:08 PM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 09:21 AM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 08:15 PM