Hey Z1. ETA on those headers?

Wonka2581 · 03-26-2013, 04:19 PM

Quote:

Originally Posted by Yutnaka

I am z1 today and inquired about those headers. They said 6-8 weeks. They plan to have one set ready for ZDayz.

Sweet! Did they quote a price by chance?

Yutnaka · 03-26-2013, 07:21 PM

No they didnt quote me a price.

Joepro · 04-01-2013, 10:36 AM

Pricing will be intresting...this will be an in demand product, but how high, eh, probably not that much. Mostly DIY'ers is my guess because shops charge an absorbanate install fee, I have not done a 370 install, but did my 350 headers in my driveway. took me 4 hours with hand tools, in a shop, with a good tech, 2-3 hours tops. I would be willing to spend market price on them, meaning what everyone else is charging, if they try to gouge, forget it, I will put the money towards a blower.

Zythaxus · 04-01-2013, 04:52 PM

they are quoting 11 hours for the header install...its a rough one

SPOHN · 04-03-2013, 10:46 AM

Quote:

Originally Posted by Joepro

Pricing will be intresting...this will be an in demand product, but how high, eh, probably not that much. Mostly DIY'ers is my guess because shops charge an absorbanate install fee, I have not done a 370 install, but did my 350 headers in my driveway. took me 4 hours with hand tools, in a shop, with a good tech, 2-3 hours tops. I would be willing to spend market price on them, meaning what everyone else is charging, if they try to gouge, forget it, I will put the money towards a blower.

4 hours. Calling BS.

Sh0velMan · 04-03-2013, 10:47 AM

Quote:

Originally Posted by SPOHN

4 hours. Calling BS.

Longtubes took about 12 hours.

MD-370z · 04-03-2013, 10:15 AM

I want to stay all motor so lookin for highest power gain so I will deal with the install. Hoping these will be done soon !

Zythaxus · 04-03-2013, 11:28 AM

Changing the 350 one might not be as Much of a pita as the 370, since he has said he hasnt done a 370 yet

But then spohn usually knows what he is talkin bout

SPOHN · 04-03-2013, 11:49 AM

Quote:

Originally Posted by Zythaxus

Changing the 350 one might not be as Much of a pita as the 370, since he has said he hasnt done a 370 yet

But then spohn usually knows what he is talkin bout

I've done both. They are both exactly the same.

Joepro · 04-03-2013, 11:40 AM

Sorry, did it...The passenger side on the 370 looks like a breeze, the drivers look similar to the 350. I am slighlty more mechanically inclined that the average diyer, I do all my own work on the car, only thing I do would not atempt is internal engine work, I would just be too mad if I messed something up. If you plan and prepare, have the knowledge and road map of what your are doing, it no sweat. ok, does 4 1/2 sound better? I wasnt explicently monitoring my time to the minute. most said 6-8 hrs on the 350z fourms, all people I know that should not have been attempting it. My hands were also cut to s*&% I have a scar on my right hand from it.

jack the car up- 5 minutes
drop test pipes and y, 10 minutes.
take off intake - 5 minutes
take off steering shaft- 5 minutes
head shields 15-20 minutes ( just break the bolts off, they are not going back on)
about 2 hours to get the darn things off.( had to take off coolant pipe too, this was kind of a pain)
hour to hour an half for complete assembly.
drink 10 beers.

UFreefer · 04-03-2013, 12:47 PM

My friend and I put headers on my car last weekend. Took us 4 hours as well but we had a lift. It really wasnt that bad, even got the heatshields out intact. Once the bolts are out of the driverside one, flip it upside down and it comes right out. The only hang up I ran into was that neither o2 sensor would come out of the stock headers and got damaged.

SPOHN · 04-03-2013, 02:05 PM

Quote:

Originally Posted by UFreefer

My friend and I put headers on my car last weekend. Took us 4 hours as well but we had a lift. It really wasnt that bad, even got the heatshields out intact. Once the bolts are out of the driverside one, flip it upside down and it comes right out. The only hang up I ran into was that neither o2 sensor would come out of the stock headers and got damaged.

So there was two people. Makes a hugh difference. I have a lift also.

Sh0velMan · 04-03-2013, 02:19 PM

Quote:

Originally Posted by SPOHN

So there was two people. Makes a high difference. I have a lift also.

Man shorties must be way way easier.

We had three people doing the longtubes, didn't change much. It's a long and grueling task that you have to take very slowly if you don't want to muck everything up.

SPOHN · 04-03-2013, 02:28 PM

Quote:

Originally Posted by Sh0velMan

Man shorties must be way way easier.

We had three people doing the longtubes, didn't change much. It's a long and grueling task that you have to take very slowly if you don't want to muck everything up.

I assume. Only thing I know about the LTH is the extended O2 that takes time. But shorties are just bolt up and attach test pipes. No clearance issues. Mmmmm. Now that I picture it i can see how bolting up the LT would be a pain. Especially the bottom bolts and bolts in the rear being the pipes are long and most likely in the way.

Sh0velMan · 04-03-2013, 02:38 PM

Quote:

Originally Posted by SPOHN

I assume. Only thing I know about the LTH is the extended O2 that takes time. But shorties are just bolt up and attach test pipes. No clearance issues. Mmmmm. Now that I picture it i can see how bolting up the LT would be a pain. Especially the bottom bolts and bolts in the rear being the pipes are long and most likely in the way.

Exactly.

Add in to it that they're ceramic coated and you're warned over and over to touch the coating as little as possible and to even try to install it while it's inside a damned plastic bag... Yeah.

And I actually have to take mine off so I can wrap them and put them back on to get my under hood temps under control.

Going to be awful, since I don't have a lift this time.

03-26-2013, 07:21 PM	#2 (permalink)
Yutnaka Base Member Join Date: Apr 2011 Location: Columbus, GA Posts: 212 Drives: 2011 370z 7at GM Rep Power: 16	No they didnt quote me a price. __________________ Z1 Test Pipes, AAM S-Line Midpipe, Nismo Axleback, Takeda CAI, JDM fog light, Avant Garde M310 matte black, Tein springs, uprev 310whp-SOLD!

04-01-2013, 10:36 AM	#3 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 35	Pricing will be intresting...this will be an in demand product, but how high, eh, probably not that much. Mostly DIY'ers is my guess because shops charge an absorbanate install fee, I have not done a 370 install, but did my 350 headers in my driveway. took me 4 hours with hand tools, in a shop, with a good tech, 2-3 hours tops. I would be willing to spend market price on them, meaning what everyone else is charging, if they try to gouge, forget it, I will put the money towards a blower. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 04-01-2013 at 10:40 AM.

04-01-2013, 04:52 PM	#4 (permalink)
Zythaxus Base Member Join Date: Feb 2013 Location: Marietta, GA Posts: 82 Drives: 2010 370z BS 7AT Rep Power: 14	they are quoting 11 hours for the header install...its a rough one gomer_110 likes this. __________________ "Vision" 2010 Brilliant silver 370Z Touring/sport Stillen G3 \| Z1 25 Row \| Hotchkis Sways \| Swift Spec R \| 20F/25R

04-03-2013, 11:28 AM	#8 (permalink)
Zythaxus Base Member Join Date: Feb 2013 Location: Marietta, GA Posts: 82 Drives: 2010 370z BS 7AT Rep Power: 14	Changing the 350 one might not be as Much of a pita as the 370, since he has said he hasnt done a 370 yet But then spohn usually knows what he is talkin bout __________________ "Vision" 2010 Brilliant silver 370Z Touring/sport Stillen G3 \| Z1 25 Row \| Hotchkis Sways \| Swift Spec R \| 20F/25R Last edited by Zythaxus; 04-03-2013 at 11:30 AM.

04-03-2013, 11:40 AM	#10 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 35	Sorry, did it...The passenger side on the 370 looks like a breeze, the drivers look similar to the 350. I am slighlty more mechanically inclined that the average diyer, I do all my own work on the car, only thing I do would not atempt is internal engine work, I would just be too mad if I messed something up. If you plan and prepare, have the knowledge and road map of what your are doing, it no sweat. ok, does 4 1/2 sound better? I wasnt explicently monitoring my time to the minute. most said 6-8 hrs on the 350z fourms, all people I know that should not have been attempting it. My hands were also cut to s&% I have a scar on my right hand from it. jack the car up- 5 minutes drop test pipes and y, 10 minutes. take off intake - 5 minutes take off steering shaft- 5 minutes head shields 15-20 minutes ( just break the bolts off, they are not going back on) about 2 hours to get the darn things off.( had to take off coolant pipe too, this was kind of a pain) hour to hour an half for complete assembly. drink 10 beers. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 04-03-2013 at 12:00 PM.*

04-03-2013, 10:15 AM	#7 (permalink)
MD-370z Base Member Join Date: Apr 2009 Location: canada Posts: 137 Drives: 370z,MB, sport, m6, Rep Power: 18	I want to stay all motor so lookin for highest power gain so I will deal with the install. Hoping these will be done soon !

04-03-2013, 12:47 PM	#11 (permalink)
UFreefer Base Member Join Date: Mar 2010 Location: Tampa Posts: 200 Drives: 09 Sport Touring Nav Rep Power: 17	My friend and I put headers on my car last weekend. Took us 4 hours as well but we had a lift. It really wasnt that bad, even got the heatshields out intact. Once the bolts are out of the driverside one, flip it upside down and it comes right out. The only hang up I ran into was that neither o2 sensor would come out of the stock headers and got damaged.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMS Headers	SPOHN	Intake/Exhaust	24	12-20-2012 12:16 AM
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 10:07 AM
[WTB] Headers	Dwv2005	Parts for sale (Private Classifieds)	3	02-29-2012 07:17 PM
headers	Ricardo2.0	Wanted	0	01-24-2012 12:37 AM
Headers	Paladinjc	Intake/Exhaust	12	04-08-2011 05:36 PM