GT-R R35 Plenum Test Fitment on my VQ37HR

370Zsteve · 04-23-2013, 05:49 PM

Wow, this thread is still active! Looking good, Chris!

ChrisUR · 04-29-2013, 03:52 PM

this is the final prototype GTR Plenum Adapter with mounted stock fuel rails and injectors !

today we made great progress - the lower manifold is installed, fuel system is back in place and plugged in and all necessary pipes/hoses found a port to connect except the intake pipes which I need to modify and install tomorrow.

If nothing goes totally wrong I should be able to start the engine tomorrow for the first time.

Chris

PS: as you can see there is no clearance issue with the oil filler cap

Kingbaby · 04-29-2013, 04:04 PM

*silly question time*

I'm sure I've read the answer some where, but lazy...would this fit a HR?

Awesome seeing you see this through...

DIGItonium · 04-29-2013, 04:20 PM

IIRC, technically it should if the mounting points for the lower manifold are the same for HR/VHR. Plus, HR owners have better clearance without the VVEL stuff in the way.

Sh0velMan · 04-29-2013, 04:23 PM

Just waiting for dynos.

tommyguns · 04-29-2013, 04:28 PM

Quote:

Originally Posted by Sh0velMan

Just waiting for dynos.

I've ben holding off on an ART install due to this.

Kingbaby · 04-29-2013, 04:33 PM

Quote:

Originally Posted by DIGItonium

IIRC, technically it should if the mounting points for the lower manifold are the same for HR/VHR. Plus, HR owners have better clearance without the VVEL stuff in the way.

thanks...I think my wallet just crawled up my ***

Quote:

Originally Posted by Sh0velMan

Just waiting for dynos.

same here...

Megan370z · 04-29-2013, 06:00 PM

Quote:

Originally Posted by DIGItonium

IIRC, technically it should if the mounting points for the lower manifold are the same for HR/VHR. Plus, HR owners have better clearance without the VVEL stuff in the way.

I confirm that the lower intake manifold to the head has the same bolt battern.

I even took the VVEL lower intake manifold on my HR head because it was less dirty than my HR ones.. hehe
the VVEL lower intake manifold has the number 37 casted into them
I applyed black marker to the number on my picture

Kingbaby · 04-29-2013, 06:27 PM

even though i may not buy this no time soon it's exciting to see it!

JC671 · 04-29-2013, 07:26 PM

Finally... A metal intake manifold. Just waiting to see dyno results.

Chris, looking forward. Once everything works and say there were gains made. How soon would we see the prototype lower go into production & be available for sale? Who would be selling them?

Thanks for innovating and I appreciate you sharing this with the community.

Shadezz · 04-29-2013, 07:28 PM

Amazing Buddy....Just Amazing......

Jordo! · 04-29-2013, 07:32 PM

Not to pee in the punch, but was there a baseline dyno for this car so we know where we started?

Looking forward to seeing how this all turns out...

Nixlimited · 04-29-2013, 07:35 PM

Looks awesome!

370Z JT · 04-29-2013, 07:49 PM

Quote:

Originally Posted by Jordo!

Not to pee in the punch, but was there a baseline dyno for this car so we know where we started?

Looking forward to seeing how this all turns out...

He has one I believe.

Or at the very least, has access to a dyno.

ChrisUR · 04-30-2013, 12:14 AM

Yes I made several dyno runs before and have a dyno next to my garage so that will be no issue !

04-23-2013, 05:49 PM	#256 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 42	Wow, this thread is still active! Looking good, Chris! __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

04-29-2013, 03:52 PM	#257 (permalink)
ChrisUR Base Member Join Date: Jun 2010 Location: Germany Posts: 116 Drives: 370Z Black Edition Rep Power: 14	this is the final prototype GTR Plenum Adapter with mounted stock fuel rails and injectors ! today we made great progress - the lower manifold is installed, fuel system is back in place and plugged in and all necessary pipes/hoses found a port to connect except the intake pipes which I need to modify and install tomorrow. If nothing goes totally wrong I should be able to start the engine tomorrow for the first time. Chris PS: as you can see there is no clearance issue with the oil filler cap DIGItonium, Kingbaby, XwChriswX and 7 others like this. __________________ ProStreet N1 exhaust \| ProStreet N1 Y-Pipe \| STILLEN G3 Intake \| NST Pulley Kit EIBACH Pro-Springs \| EIBACH Pro-Spacers \| EIBACH Sway Bars \| SEIBON GT2 Rear Wing MOCAL Oil Cooler 25row\| STILLEN TransCooler \| STILLEN PS Cooler \| STILLEN Front Fascia

04-29-2013, 04:20 PM	#259 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	IIRC, technically it should if the mounting points for the lower manifold are the same for HR/VHR. Plus, HR owners have better clearance without the VVEL stuff in the way. Kingbaby likes this. __________________

04-29-2013, 04:23 PM	#260 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Just waiting for dynos. Jordo! likes this. __________________ Buy My Car! \| Build Thread

04-29-2013, 07:26 PM	#265 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	Finally... A metal intake manifold. Just waiting to see dyno results. Chris, looking forward. Once everything works and say there were gains made. How soon would we see the prototype lower go into production & be available for sale? Who would be selling them? Thanks for innovating and I appreciate you sharing this with the community. __________________ A special "Thank You" to the Fast Intentions Crew! "Fueled By Passion"

04-29-2013, 07:28 PM	#266 (permalink)
Shadezz Track Member Join Date: May 2012 Location: Colorado Age: 42 Posts: 896 Drives: 2012 Nissan 370Z Rep Power: 14	Amazing Buddy....Just Amazing...... __________________ 2012 370Z BLACK EDITION/ FLT BLK Rays / 5% 3M Tint / DW's / Z1 SS & 2 Piece Rotors Nismo S-Tune OEM / Beluga CBE & Y-PIPE / DDX370 / GTR Start .4 Fluid / NST Blue Kit

04-29-2013, 07:32 PM	#267 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Not to pee in the punch, but was there a baseline dyno for this car so we know where we started? Looking forward to seeing how this all turns out... Megan370z likes this. __________________ Enjoy it. Destroy it.

04-29-2013, 07:35 PM	#268 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 25	Looks awesome! __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

04-30-2013, 12:14 AM	#270 (permalink)
ChrisUR Base Member Join Date: Jun 2010 Location: Germany Posts: 116 Drives: 370Z Black Edition Rep Power: 14	Yes I made several dyno runs before and have a dyno next to my garage so that will be no issue ! Spikuh, XwChriswX and Staples like this. __________________ ProStreet N1 exhaust \| ProStreet N1 Y-Pipe \| STILLEN G3 Intake \| NST Pulley Kit EIBACH Pro-Springs \| EIBACH Pro-Spacers \| EIBACH Sway Bars \| SEIBON GT2 Rear Wing MOCAL Oil Cooler 25row\| STILLEN TransCooler \| STILLEN PS Cooler \| STILLEN Front Fascia

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kinetix 370Z Intake Plenum! Should i Buy it ?	Zedx	Intake/Exhaust	41	04-21-2012 12:59 PM
vq37hr	darron	Wanted	6	09-07-2011 11:27 PM
Plenum spacer anyone???	john370z	Intake/Exhaust	13	03-27-2010 11:02 AM
HKS test fitment on our PROJECT 370Z	LOU@AMPLIFIED	Brakes & Suspension	20	03-23-2009 01:13 PM