MOTORDYNE ART Pipes - Review

mikeg351991 · 03-29-2013, 02:51 AM

hey motor dyne. I just purchased art pipes for my 08 g35x awd sedan. i mentioned it was awd but they did not tell me anything about the art pipes not fitting properly. Has the fitment problem been addressed now? willl my art pipes fit perfectly on my g35x sedan? or is the promotion where i get a discount and full money back guarantee if they d

o not fit still going?

Quote:

Originally Posted by Motordyne

Only one universal.

mikeg351991 · 03-29-2013, 02:54 AM

i just bought art pipes yesterday but they did not tell me they would not fit and i explained i had a g35x all wheel drive. has the issue been resolved? if not i would like to participate. can i still get the discount too? i payed full price

Quote:

Originally Posted by Motordyne

The ART pipes have been confirmed to fit with much more clearance for the automatic transmission but it hasn't been fit on a X yet.

Anybody in the US who wants to test fitment on a X?

MaDMaXX · 03-29-2013, 08:10 PM

You are best off calling MD directly to ask if they know for sure, i can't remember if i've seen the answer anywhere.

advan37 · 09-12-2013, 05:26 AM

Recently I purchased those ART test pipe from an authorized dealer . After installation , I noticed that right pipe (passenger side) is hanging down MUCH more than the other one . so I contacted Tony at MD and I explain to him this and i attached some photos , he said " the location of the passenger side (right side) ART pipe is correct , and it must be that way out of necessity of clearance on all makes and models of coupes and sedans " !!!

Right now the ART pipe (right side) almost scrape everywhere .

I had many HFC's and test pipes none of them had such fitment issue.
What do you guys think ? is this alright and it should look like that ?

First 2 pictures with Berk CBE and the rest with stock exhaust .

Thanks

boomboom · 09-12-2013, 05:37 PM

Wheres best place to buy their (motordyne) exhaust system?

mag_black · 09-12-2013, 05:42 PM

I'd contact Jomer for best pricing from fredbeansparts. His username is FBNissan.

MaDMaXX · 09-12-2013, 07:29 PM

It looks like the resonator section isn't at the right angle, also remember you have rotation adjustment on the ART pipes, try resetting that first.

advan37 · 09-13-2013, 06:13 PM

Quote:

Originally Posted by MaDMaXX

It looks like the resonator section isn't at the right angle, also remember you have rotation adjustment on the ART pipes, try resetting that first.

What do you mean by rotateing the pipe ? The right resonator itself hanging low , the other side is ok . Even with rotation which I doubt its possible still it will hang low.

MaDMaXX · 09-13-2013, 06:33 PM

The ART pipes are adjustable via rotation on the headers, it affects the height of the y-pipe end under the car.

chrisgordillo · 01-26-2014, 07:55 AM

I just got mine installed on my Stillen super charged 370z. Before I had invida tp but they cracked twice for no reason so I went with the motordyne. I also have tanabe exhaust. These are way quieter than invida. That can be good or bad depending on what sound you want.

Verda7junior · 01-26-2014, 08:17 PM

In your pic you are missing the support brace that attaches to these, if you don't install the brace then these will crack too. I'm planning on getting these in spring so then I should be able to get a 12.9@110 at the drag strip.

chrisgordillo · 01-27-2014, 11:05 AM

Quote:

Originally Posted by Verda7junior

In your pic you are missing the support brace that attaches to these, if you don't install the brace then these will crack too. I'm planning on getting these in spring so then I should be able to get a 12.9@110 at the drag strip.

I actually put it on right after this pic was taken but thx for the heads up.

chrisgordillo · 01-28-2014, 07:20 AM

It seems like these tp's are lower than the invidas I had. I hear it hitting when I go over speed bumps where before with invida nothing hit. Does anyone know exactly what is making contact? Is it the reinforce bar that goes across the tp's? I also liked the sound of my invidas better. The only problem is that there welds keep failing me. These motordyne are almost to quiet.

Mandingo · 01-28-2014, 03:19 PM

yea they are pretty damn quiet. I think the lowest part of the ART pipes are the ends of the side-branch resonators.

Since the ART pipes use the oem donut gastket, they can pivot on that to change the pipe's angle relative to the header. For example: if you tightened the bottom two bolts on the triangular flange, then went to tighten the top bolt, it would result in the ART pipe being angled downwards too much. Its best to get the pipes sitting how you want them, then tighten the 3 bolts on the flange equally.

MaDMaXX · 01-28-2014, 07:00 PM

^^^^ That, also, make sure there isn't the floor shield bolts sticking through, i don't know if it exists on the 370, but worth checking.

03-29-2013, 08:10 PM	#1173 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	You are best off calling MD directly to ask if they know for sure, i can't remember if i've seen the answer anywhere. __________________ '04.5 350Z - Very Motordyne.

09-12-2013, 05:42 PM	#1176 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	I'd contact Jomer for best pricing from fredbeansparts. His username is FBNissan. Zbrah likes this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

09-12-2013, 07:29 PM	#1177 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	It looks like the resonator section isn't at the right angle, also remember you have rotation adjustment on the ART pipes, try resetting that first. __________________ '04.5 350Z - Very Motordyne.

09-13-2013, 06:33 PM	#1179 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	The ART pipes are adjustable via rotation on the headers, it affects the height of the y-pipe end under the car. __________________ '04.5 350Z - Very Motordyne.

01-26-2014, 08:17 PM	#1181 (permalink)
Verda7junior Base Member Join Date: Oct 2011 Location: Sheboygan Falls WI Posts: 53 Drives: 15NISMO16Q50RS400AWD Rep Power: 13	In your pic you are missing the support brace that attaches to these, if you don't install the brace then these will crack too. I'm planning on getting these in spring so then I should be able to get a 12.9@110 at the drag strip. __________________ Red 2012 370Z Base Sport 7AT, ExoticSpeed CBE, 13.0@109(sold) Q50RS400AWD 12.2@116 JB1 CBE

09-12-2013, 05:37 PM	#1175 (permalink)
boomboom Enthusiast Member Join Date: Aug 2009 Location: WI Posts: 438 Drives: 09 NISSAN 370Z Rep Power: 15	Wheres best place to buy their (motordyne) exhaust system?

01-28-2014, 07:20 AM	#1183 (permalink)
chrisgordillo Base Member Join Date: Jul 2010 Location: Broward Posts: 30 Drives: Black 2010 370z Rep Power: 14	It seems like these tp's are lower than the invidas I had. I hear it hitting when I go over speed bumps where before with invida nothing hit. Does anyone know exactly what is making contact? Is it the reinforce bar that goes across the tp's? I also liked the sound of my invidas better. The only problem is that there welds keep failing me. These motordyne are almost to quiet.

01-28-2014, 03:19 PM	#1184 (permalink)
Mandingo Track Member Join Date: Nov 2010 Location: Dallas Posts: 624 Drives: '10 370z 6spd Rep Power: 3370	yea they are pretty damn quiet. I think the lowest part of the ART pipes are the ends of the side-branch resonators. Since the ART pipes use the oem donut gastket, they can pivot on that to change the pipe's angle relative to the header. For example: if you tightened the bottom two bolts on the triangular flange, then went to tighten the top bolt, it would result in the ART pipe being angled downwards too much. Its best to get the pipes sitting how you want them, then tighten the 3 bolts on the flange equally. __________________ some mods

01-28-2014, 07:00 PM	#1185 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	^^^^ That, also, make sure there isn't the floor shield bolts sticking through, i don't know if it exists on the 370, but worth checking. __________________ '04.5 350Z - Very Motordyne.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Review: Motordyne M370 Manifold w/ Comparisons	Staples	Intake/Exhaust	66	06-21-2014 01:35 PM
Motordyne test pipes?	Dan Z Man	Intake/Exhaust	37	12-15-2010 09:12 PM
Motordyne Intake Manifold on the way!!	GZ3	Intake/Exhaust	67	09-16-2010 12:49 AM
another FI 18" CF CBE review w/ test pipes	mrdino77	Intake/Exhaust	9	05-27-2010 12:13 PM