GTM Performance Engineering: GTM TD05 16G Test Results 91 Octane 7AT

Scribe · 07-18-2012, 11:29 AM

I'm super excited to see such a well matched kit for the stock VQ37 and happy that GTM didn't nerf the results in order to prevent cannibalization of their larger turbo kit. I was also concerned by the idea of cutting costs, but GTM have shown they don't cut corners and it is encouraging to see the results.

Some smaller turbo or supercharger kits exclude blowoff valves. Running 10 psi I'm happy to see they are present. But that leads me to ask about running 10 psi on the stock rods, especially on 91 which detonates almost as soon as you put it in your gas tank.

Some people seem to be finding the upper limit of these rods to be around 550whp and I would have concerns about longevity. Are there any concerns from you guys at GTM? I live the in the land of 93, and probably wouldn't want to run more than 9 psi, but could see an issue where people tune their cars to run 11-12 psi on 93 octane and then throw a rod through the side of their block.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering:PROJECT: VQ42VHR S/C	SAM@GTM	Forced Induction	32	06-01-2012 11:38 PM
GTM Performance Engineering VQ45VHR-Our Journey to The 1000 HP and Beyond	SAM@GTM	Forced Induction	1588	08-20-2011 11:19 AM
GTM Performance Engineering Supercharger CARB kit Test Car Needed	SAM@GTM	Southern California Region	11	11-09-2010 07:02 PM
GTM Performance Engineering Supercharger CARB kit Test Car Needed	SAM@GTM	Forced Induction	26	10-14-2010 02:49 PM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 12:07 AM

07-18-2012, 11:29 AM	#1 (permalink)
Scribe Base Member Join Date: Jan 2009 Location: Houston, TX. Posts: 182 Drives: Touring-Sport-Manual Rep Power: 222	I'm super excited to see such a well matched kit for the stock VQ37 and happy that GTM didn't nerf the results in order to prevent cannibalization of their larger turbo kit. I was also concerned by the idea of cutting costs, but GTM have shown they don't cut corners and it is encouraging to see the results. Some smaller turbo or supercharger kits exclude blowoff valves. Running 10 psi I'm happy to see they are present. But that leads me to ask about running 10 psi on the stock rods, especially on 91 which detonates almost as soon as you put it in your gas tank. Some people seem to be finding the upper limit of these rods to be around 550whp and I would have concerns about longevity. Are there any concerns from you guys at GTM? I live the in the land of 93, and probably wouldn't want to run more than 9 psi, but could see an issue where people tune their cars to run 11-12 psi on 93 octane and then throw a rod through the side of their block.