Boosted Performance single turbo build

Dzel · 04-08-2013, 11:20 AM

What's the difference between a ball bearing turbo and a non ball bearing turbo?

Boosted Performance · 04-08-2013, 11:32 AM

Quote:

Originally Posted by Dzel

What's the difference between a ball bearing turbo and a non ball bearing turbo?

Balls...

This is easier:

Ball Bearing vs. Journal Bearing

GaleForce · 04-08-2013, 12:07 PM

15% improvement in spooling! Wow!

Dzel · 04-08-2013, 12:08 PM

Right! How can you not get this upgrade

Boosted Performance · 04-08-2013, 02:22 PM

Quote:

Originally Posted by Dzel

Right! How can you not get this upgrade

When I made the switch on my own car, I honestly did not feel a big difference. The upgrade is $525 as well, and some customers like to use that money towards something else.

The JB turbo on the test mule car already spooled to 10psi by 3600rpm. That is very responsive.

Dzel · 04-08-2013, 02:44 PM

I've been all over this forum when it comes to FI. I've unsubscribed to all the rest except for F.I. Kinda of a relief Tony speaks so highly of you Sasha that I would think y'all were best friends!

rhd · 04-08-2013, 06:48 PM

Quote:

Originally Posted by Boosted Performance

Balls...

rhd · 04-14-2013, 08:47 PM

I have been working like a crazy man in my shop on my BP install, here’s an update.

I have had some time in between part shipments to work out some details on wideband and boost controller vacuum sources, also required is a vacuum source for the BOV. With those needs in mind I decided to install a vacuum header. I purchased the header here: Vac Header

I found a nice spot inside the brake/clutch fluid reservoir location to mount the manifold. I am also installing an AEM failsafe gauge (wideband/AFR) and an HKS type S boost controller, getting through the firewall at this location is not too bad, there is a large rubber wiring boot that allows access. I added a Z1 motor sports sticker I had laying around.

I have a ton more pics of all the install, it’s too much work right now to put together a build thread with all the work I have already done, that will come later.

rhd · 04-21-2013, 12:47 PM

Install pics...

Tune next Friday

GaleForce · 04-21-2013, 04:27 PM

Open dumps!

GaleForce · 04-21-2013, 06:19 PM

Here is my dyno sheet. 93 octane.

High boost when using the HKS boost controller, low boost using the waste gate springs.

rhd · 04-21-2013, 06:42 PM

Nice!

Is the first run the "Base tune"?

SS_Firehawk · 04-21-2013, 07:04 PM

Glad to see you got a dyno starting at 2k rpm

Power comes on smooth and stays there.

GaleForce · 04-21-2013, 07:29 PM

Quote:

Originally Posted by rhd

Nice!

Is the first run the "Base tune"?

This is the final numbers.

First run using the base tune was around 460hp.

Mitco39 · 04-21-2013, 07:53 PM

Quote:

Originally Posted by GaleForce

This is the final numbers.

First run using the base tune was around 460hp.

460 is pretty good for the base, I assume its the same tune I am running right now.

Awesome numbers, 2 more weeks for me

04-08-2013, 11:20 AM	#1651 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	What's the difference between a ball bearing turbo and a non ball bearing turbo? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-08-2013, 12:07 PM	#1653 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	15% improvement in spooling! Wow! Dzel likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

04-08-2013, 12:08 PM	#1654 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Right! How can you not get this upgrade __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-08-2013, 02:44 PM	#1656 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	I've been all over this forum when it comes to FI. I've unsubscribed to all the rest except for F.I. Kinda of a relief Tony speaks so highly of you Sasha that I would think y'all were best friends! __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-14-2013, 08:47 PM	#1658 (permalink)
rhd Enthusiast Member Join Date: Feb 2012 Location: In the shop Posts: 281 Drives: Women Crazy Rep Power: 13	I have been working like a crazy man in my shop on my BP install, here’s an update. I have had some time in between part shipments to work out some details on wideband and boost controller vacuum sources, also required is a vacuum source for the BOV. With those needs in mind I decided to install a vacuum header. I purchased the header here: Vac Header I found a nice spot inside the brake/clutch fluid reservoir location to mount the manifold. I am also installing an AEM failsafe gauge (wideband/AFR) and an HKS type S boost controller, getting through the firewall at this location is not too bad, there is a large rubber wiring boot that allows access. I added a Z1 motor sports sticker I had laying around. I have a ton more pics of all the install, it’s too much work right now to put together a build thread with all the work I have already done, that will come later. fuct, JC671 and hughdogz like this.

04-21-2013, 12:47 PM	#1659 (permalink)
rhd Enthusiast Member Join Date: Feb 2012 Location: In the shop Posts: 281 Drives: Women Crazy Rep Power: 13	Install pics... Tune next Friday ENT-Z, cdoxp800, XwChriswX and 2 others like this.

04-21-2013, 04:27 PM	#1660 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Open dumps! __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

04-21-2013, 06:19 PM	#1661 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Here is my dyno sheet. 93 octane. High boost when using the HKS boost controller, low boost using the waste gate springs. ENT-Z, cdoxp800, XwChriswX and 5 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z Last edited by GaleForce; 04-21-2013 at 07:31 PM.

04-21-2013, 06:42 PM	#1662 (permalink)
rhd Enthusiast Member Join Date: Feb 2012 Location: In the shop Posts: 281 Drives: Women Crazy Rep Power: 13	Nice! Is the first run the "Base tune"?

04-21-2013, 07:04 PM	#1663 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	Glad to see you got a dyno starting at 2k rpm Power comes on smooth and stays there. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
STS 370Z Single Turbo System	STSTurbo.com	Forced Induction	337	11-21-2012 10:55 AM
Question about a single turbo set up?	dnasty370z	Forced Induction	8	07-26-2012 10:56 AM
New Single Turbo Option.. yes please	Isamu	Forced Induction	108	05-09-2012 08:07 AM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 04:03 PM