Ron's better late than never TT build thread

Ron · 04-28-2012, 02:58 PM

I was thinking about just banging the pipe a little to get the stud to slide in.

elliotty · 04-28-2012, 04:48 PM

Ron, I was able to get that on, but not easily. I put that stud in before the downpipe was on. Then, I ground down the rim of the nut so it would fit (mine was hitting the downpipe and wouldn't line up with the hole). When you put the downpipe back on, put that nut on first and tighten it down before putting the others on. This way you can move the pipe around to get the nut lines up. Hope you can get it lined up!

04-28-2012, 02:58 PM	#1 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 23	I was thinking about just banging the pipe a little to get the stud to slide in. __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ron's better late than never journal.	Ron	Member's 370Z Gallery	219	12-25-2014 02:49 PM
Trips Build Thread	Trips	Member's 370Z Gallery	279	07-26-2014 01:47 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
check out my build thread	Bushguts	Other Vehicles	24	08-25-2009 09:55 AM
Offical build your Z34 thread	cstr_Cali	Nissan 370Z General Discussions	68	07-16-2009 07:01 PM

04-28-2012, 04:48 PM	#2 (permalink)
elliotty Enthusiast Member Join Date: Sep 2010 Location: Charlotte, NC Posts: 355 Drives: '10 PG Nismo TT Rep Power: 16	Ron, I was able to get that on, but not easily. I put that stud in before the downpipe was on. Then, I ground down the rim of the nut so it would fit (mine was hitting the downpipe and wouldn't line up with the hole). When you put the downpipe back on, put that nut on first and tighten it down before putting the others on. This way you can move the pipe around to get the nut lines up. Hope you can get it lined up!