Announcing TopgunZ ACE Supercharger Kit!

TopgunZ · 02-19-2020, 07:47 AM

Yes, the removable intake will be a drop in for Gen 1.

You could get real lazy and hack saw off the K&N filter so you dont have to remove the supercharger.

takemorepills · 02-19-2020, 09:08 AM

Can we get a picture of the cast intake elbow installed in a car, with a filter on it?

TopgunZ · 02-19-2020, 03:29 PM

Quote:

Originally Posted by takemorepills

Can we get a picture of the cast intake elbow installed in a car, with a filter on it?

Here you go.

takemorepills · 02-19-2020, 09:37 PM

Quote:

Originally Posted by TopgunZ

Here you go.

Nice! No issues with engine movement affecting the S/C inlet to core support pass-through?

INFmstrTech · 03-11-2020, 07:30 AM

Quote:

Originally Posted by TopgunZ

Here you go.

Sorry for the stupid question but I didn’t see this info anywhere so I’ll ask! How is the cast aluminum intake fitted to the s/c, and how does it support the tube with the air filter?
I’m already a2a but I definitely want to upgrade to this! When do you think this will be ready for purchase?

Also congrats on this-I hate taking the s/c out to get to the filter!!!

takemorepills · 03-25-2020, 11:21 AM

Quote:

Originally Posted by TopgunZ

So close!! Car wouldn't fit on the Dyno. This rig is slammed and with the widebody kit it was scrapping on the ramps. Also, the shop said the straps would be held tight against the cans on the Berk since it sits so low. It's in the shop now. We are removing the rear fenders and side skirts for clearance. Also removing the cans on the exhaust.

Dyno rescheduled for Thursday. Another week of waiting. Sorry guys. Pics for proof.

Quote:

Originally Posted by TopgunZ

Here you go.

Is that black Z using the cast elbow for his air filter plumbing?

TopgunZ · 03-25-2020, 11:57 AM

He was. Right now he has the TurboGuard/FilterWears setup. It can be removed for cleaning as often as necessary and filters out anything that could damage your engine. The problem the way other shops are doing it is that they are using a 3.5" turboguard that goes directly onto the supercharger. That is great if you want to only filter 1/2" rocks from entering the engine. Sand will suck in like a dyson. By placing a sand/dust guard like a filterwears on the 3.5" turboguard it restricts the blower to about 10psi.

My new design places a 6" turboguard over a velocity stack which allows a 6.5" filterwears to be used, creating twice the surface area of intake air.

KN intake makes roughly 12 psi.
This makes 14 psi.

The funny thing is that he had intentions all along to run E85 and we were going to grab those numbers but he said the car is so fast now that he doesnt think he even wants anymore power...Lol. He does/will track the car so he wants to see how/if he can handle the power. I told him he will be back for more..they always are..Lol.

cgr406 · 02-19-2020, 11:59 AM

Quote:

Originally Posted by TopgunZ

Yes, the removable intake will be a drop in for Gen 1.

You could get real lazy and hack saw off the K&N filter so you dont have to remove the supercharger.

Haha. That's what I did! It slips right out.

Sent from my Pixel 3 using Tapatalk

TBatt · 02-20-2020, 10:33 AM

I want!/ need/ gotta have!

When can i order one?

wideglideleon · 02-20-2020, 10:45 AM

TBatt aren't you selling your Z.

Jayhovah · 02-20-2020, 12:28 PM

Quote:

Originally Posted by TBatt

I want!/ need/ gotta have!

When can i order one?

Quote:

Originally Posted by wideglideleon

TBatt aren't you selling your Z.

Welcome back TBatt!

TBatt · 02-21-2020, 08:48 AM

Quote:

Originally Posted by wideglideleon

TBatt aren't you selling your Z.

Yes, I'm selling it but this would be a great add on for the new owner. Who ever buys my Z is getting a lot of extras too.

I love my Z and don't really want to sell it but I need the room.......

I'll still be haunting you guys at least for a while. I feel like I've made a bunch of good friends here.

DUSHER · 02-20-2020, 06:54 PM

so does the new intake come with the kit or is it extra?

G37xMN · 02-26-2020, 10:29 PM

Need this kit ASAP !!

espimax · 02-26-2020, 10:42 PM

I also have the 1st generation kit and will like to get the updated versions please. I have not install it yet either my supercharger waiting on this upgrade.

02-19-2020, 07:47 AM	#1 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Yes, the removable intake will be a drop in for Gen 1. You could get real lazy and hack saw off the K&N filter so you dont have to remove the supercharger. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

03-25-2020, 11:57 AM	#7 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	He was. Right now he has the TurboGuard/FilterWears setup. It can be removed for cleaning as often as necessary and filters out anything that could damage your engine. The problem the way other shops are doing it is that they are using a 3.5" turboguard that goes directly onto the supercharger. That is great if you want to only filter 1/2" rocks from entering the engine. Sand will suck in like a dyson. By placing a sand/dust guard like a filterwears on the 3.5" turboguard it restricts the blower to about 10psi. My new design places a 6" turboguard over a velocity stack which allows a 6.5" filterwears to be used, creating twice the surface area of intake air. KN intake makes roughly 12 psi. This makes 14 psi. The funny thing is that he had intentions all along to run E85 and we were going to grab those numbers but he said the car is so fast now that he doesnt think he even wants anymore power...Lol. He does/will track the car so he wants to see how/if he can handle the power. I told him he will be back for more..they always are..Lol. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 03-25-2020 at 12:12 PM.

02-20-2020, 10:33 AM	#9 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20170	I want!/ need/ gotta have! When can i order one? __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Topgunz full supercharger kits!!	TopgunZ	Forced Induction	497	02-10-2020 05:23 AM
[FOR SALE] Stillen/Topgunz A2A Supercharger Partout	fork	Parts for sale (Private Classifieds)	18	12-04-2019 06:52 AM
[WTB] Supercharger kit Stillen, TopGunz, etc	NismoJohnG	Parts for sale (Private Classifieds)	5	05-06-2019 09:08 AM
Topgunz a2a and full supercharger cyber sale!	TopgunZ	Drivetrain/Engine	0	11-26-2018 12:38 PM
[FOR SALE] Topgunz a2a and full supercharger sale!	TopgunZ	Parts for sale (Private Classifieds)	0	11-26-2018 12:37 PM

02-19-2020, 09:08 AM	#2 (permalink)
takemorepills Base Member Join Date: Apr 2019 Location: Seattle, WA Posts: 196 Drives: Q60 3.7 AWD Rep Power: 6718	Can we get a picture of the cast intake elbow installed in a car, with a filter on it?

02-20-2020, 10:45 AM	#10 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64087	TBatt aren't you selling your Z.

02-20-2020, 06:54 PM	#13 (permalink)
DUSHER Base Member Join Date: Oct 2017 Location: Colorado Posts: 130 Drives: stillen 370z Rep Power: 9	so does the new intake come with the kit or is it extra?

02-26-2020, 10:29 PM	#14 (permalink)
G37xMN Base Member Join Date: Jan 2020 Location: Minnesta Posts: 27 Drives: ACE 2012 G37x Sedan Rep Power: 7	Need this kit ASAP !!

02-26-2020, 10:42 PM	#15 (permalink)
espimax Base Member Join Date: Sep 2010 Location: linden,nj Posts: 151 Drives: 2008 G37 Rep Power: 16	I also have the 1st generation kit and will like to get the updated versions please. I have not install it yet either my supercharger waiting on this upgrade.