Fast Intentions Stage 2 TT build by MA-Motorsports.

Rusty · 01-05-2020, 12:53 PM

Quote:

Originally Posted by solidus

My Titan XD Cummins is a compound turbo setup. Even though Nissan can kiss my a$$.

Some ford super duty's are compounds too. Depending on year.

GeauxTigers1 · 01-05-2020, 04:01 PM

Damn Spooler so sorry to hear man. I came on here to see what Crazy flywheel/clutch combo you had told me about only to see this. Scares the **** out of me man with the 22psi setting I have on mine. Think even with the built block, closed deck I should keep boost levels low if I want to last. Limiting it to 15psi

today is a sad day brother. Hope all is well and you’re back again soon!

Spooler · 01-05-2020, 07:36 PM

Quote:

Originally Posted by GeauxTigers1

Damn Spooler so sorry to hear man. I came on here to see what Crazy flywheel/clutch combo you had told me about only to see this. Scares the **** out of me man with the 22psi setting I have on mine. Think even with the built block, closed deck I should keep boost levels low if I want to last. Limiting it to 15psi

today is a sad day brother. Hope all is well and you’re back again soon!

Crap happens, you should be good to 17psi if you have ARP 625 head studs and a close deck block. I have a couple of options I am looking at. Nobody knows how long anything will last due to the fact that they don't drive them for whatever reason. I may be back sooner than you think I hope.

solidus · 01-05-2020, 11:49 PM

Spooler whats your compression ratio? I have 10:1 and even with that 27psi spike I had no evidence of problems. That whole day of running hard at Wannagofast I was running 18psi and since Seb fixed my duty cycle on the boost solenoid I've had it at 21psi and hammered the crap out of it. Seb made a big deal on confirming L19s but I'm thinking the way the torque hits is going to play a big part along with compression making a difference. I also know Matt DiPaolo made his power at a ridiculous psi with the Stage 4 IPP block but a closed deck RJM block.

Hotrodz · 01-06-2020, 07:44 AM

Quote:

Originally Posted by solidus

Spooler whats your compression ratio? I have 10:1 and even with that 27psi spike I had no evidence of problems. That whole day of running hard at Wannagofast I was running 18psi and since Seb fixed my duty cycle on the boost solenoid I've had it at 21psi and hammered the crap out of it. Seb made a big deal on confirming L19s but I'm thinking the way the torque hits is going to play a big part along with compression making a difference. I also know Matt DiPaolo made his power at a ridiculous psi with the Stage 4 IPP block but a closed deck RJM block.

Do you have boost limit protection? Seb set my limited my psi to 15 and when I was having issues with the bolts backing out on the waste gate my boost would spike and it would cut throttle and reduce the rpms 5500 to protect the motor.

sirnixalot · 01-06-2020, 08:11 AM

Pioneering **** as an individual sucks. Thanks for sharing your findings thus far.

Spooler · 01-06-2020, 08:44 AM

Quote:

Originally Posted by solidus

Spooler whats your compression ratio? I have 10:1 and even with that 27psi spike I had no evidence of problems. That whole day of running hard at Wannagofast I was running 18psi and since Seb fixed my duty cycle on the boost solenoid I've had it at 21psi and hammered the crap out of it. Seb made a big deal on confirming L19s but I'm thinking the way the torque hits is going to play a big part along with compression making a difference. I also know Matt DiPaolo made his power at a ridiculous psi with the Stage 4 IPP block but a closed deck RJM block.

I was running fine also until I wasn't. LOL I was at 11:1 compression. Matt already blew his headgaskets from what I was told. Can't use him as an example. Besides, his car is a mall crawler anyway.

Hotrodz · 01-06-2020, 08:53 AM

Quote:

Originally Posted by Spooler

I was running fine also until I wasn't. LOL I was at 11:1 compression. Matt already blew his headgaskets from what I was told. Can't use him as an example. Besides, his car is a mall crawler anyway.

Wow, sorry to hear about Matt! As far as I know mine will be 11:1 as well. I know Seb's is 11:1 also.

Sent from my SM-G965U using Tapatalk

Spooler · 01-06-2020, 08:57 AM

Quote:

Originally Posted by Hotrodz

Wow, sorry to hear about Matt! As far as I know mine will be 11:1 as well. I know Seb's is 11:1 also.

Sent from my SM-G965U using Tapatalk

Seb's got your back. He knows what he can and can't do.

Spooler · 01-06-2020, 09:02 AM

Quote:

Originally Posted by Hotrodz

Wow, sorry to hear about Matt! As far as I know mine will be 11:1 as well. I know Seb's is 11:1 also.

Sent from my SM-G965U using Tapatalk

That happened a while back when his car was first completed. He is back up and running now.

Hotrodz · 01-06-2020, 09:04 AM

Quote:

Originally Posted by Spooler

That happened a while back when his car was first completed. He is back up and running now.

Copy that! Okay thanks for the clarification.

Sent from my SM-G965U using Tapatalk

Whjaxn17 · 01-06-2020, 10:01 AM

Quote:

Originally Posted by Spooler

I was running fine also until I wasn't. LOL I was at 11:1 compression. Matt already blew his headgaskets from what I was told. Can't use him as an example. Besides, his car is a mall crawler anyway.

That was the 9XXwhp car Forged Perforamance did, right? I was wondering whatever happened to that car, but I guess that's what yall have been saying. Laid it down on the dyno once and then radio silence...

Spooler · 01-06-2020, 10:12 AM

Quote:

Originally Posted by Whjaxn17

That was the 9XXwhp car Forged Perforamance did, right? I was wondering whatever happened to that car, but I guess that's what yall have been saying. Laid it down on the dyno once and then radio silence...

Yes, that is the car. Laid it down, blew the headgaskets, got it fixed, and then doesn't drive it hard anymore. Same thing with CarbonZ.

Spooler · 01-06-2020, 11:35 AM

Quote:

Originally Posted by sirnixalot

Pioneering **** as an individual sucks. Thanks for sharing your findings thus far.

I learned a good amount of information researching my 2nd motor build before my first one cut loose. I was lucky I had already started that project. I think I know what I am going to do. We shall see. Getting closer.

Elmo370z · 01-06-2020, 11:09 PM

Quote:

Originally Posted by Spooler

Yes, that is the car. Laid it down, blew the headgaskets, got it fixed, and then doesn't drive it hard anymore. Same thing with CarbonZ.

He is scared to run it autocorrected. Then I asked why build a damn near 1000 hp car. Silence.

01-05-2020, 04:01 PM	#2057 (permalink)
GeauxTigers1 Track Member Join Date: Nov 2011 Location: Surprise, Az Posts: 590 Drives: 2017 370Z Nismo Rep Power: 6745	Damn Spooler so sorry to hear man. I came on here to see what Crazy flywheel/clutch combo you had told me about only to see this. Scares the **** out of me man with the 22psi setting I have on mine. Think even with the built block, closed deck I should keep boost levels low if I want to last. Limiting it to 15psi today is a sad day brother. Hope all is well and you’re back again soon! Rusty, Hotrodz, Spooler and 4 others like this. __________________ Fast Intentions Kit Stage 2 #076 2017 Twin Turbo 370z Nismo. JMS Built Block, Closed Deck 874whp, 803lbs Tq e85 Ecutek Tune

01-05-2020, 11:49 PM	#2059 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	Spooler whats your compression ratio? I have 10:1 and even with that 27psi spike I had no evidence of problems. That whole day of running hard at Wannagofast I was running 18psi and since Seb fixed my duty cycle on the boost solenoid I've had it at 21psi and hammered the crap out of it. Seb made a big deal on confirming L19s but I'm thinking the way the torque hits is going to play a big part along with compression making a difference. I also know Matt DiPaolo made his power at a ridiculous psi with the Stage 4 IPP block but a closed deck RJM block. Hotrodz, jchammond and URBiN~HURMiT like this.

01-06-2020, 08:11 AM	#2061 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57455	Pioneering **** as an individual sucks. Thanks for sharing your findings thus far. Rusty, Hotrodz, Spooler and 4 others like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM