Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 12-20-2019, 08:40 AM

Quote:

Originally Posted by Rusty

You're just a cheap bastard at times.

I spend money when it makes sense. Paying top dollar for a set of tire warmers that I may use 2 times a year is just stupid. Even for an amateur track guy it doesn't make sense. So, you go ahead and demand the best and I will do my thang spending on what I deem important.

Rusty · 12-20-2019, 10:09 AM

Quote:

Originally Posted by Spooler

I spend money when it makes sense. Paying top dollar for a set of tire warmers that I may use 2 times a year is just stupid. Even for an amateur track guy it doesn't make sense. So, you go ahead and demand the best and I will do my thang spending on what I deem important.

For you. Only about twice a year. Those $2000 tire warmers are over kill. If your Z was strictly track and doing about two weekends a month. Then yeah I could see it. But you want something that won't fall apart either. Do your research on them. The issues are uneven heating. Bad plugs. Heating elements that either fail or get hot or cold spots. Poor stitching. Controllers issues.

solidus · 12-20-2019, 12:28 PM

Quote:

Originally Posted by Rusty

For you. Only about twice a year. Those $2000 tire warmers are over kill. If your Z was strictly track and doing about two weekends a month. Then yeah I could see it. But you want something that won't fall apart either. Do your research on them. The issues are uneven heating. Bad plugs. Heating elements that either fail or get hot or cold spots. Poor stitching. Controllers issues.

Lol! There is no comparison to sitting in your own pit at Jennings
GP and complaining that some butt hole is burning something and 3 minutes later that butthole is you falling out your chair because your tire warmers
are catching fire.
Relating the experience of a friend remarkably similar to present day me.
With tire warmers you either go all out or babysit them anytime they're plugged in.
But I'm with Rusty, I'd rather drop 2k on a set of axles , a triple clutch or a cage with harnesses. Of course if I had everything and 2k was burning a hole in my pocket.......I'd buy an STI 2011.

Rusty · 12-20-2019, 02:04 PM

Quote:

Originally Posted by solidus

Lol! There is no comparison to sitting in your own pit at Jennings
GP and complaining that some butt hole is burning something and 3 minutes later that butthole is you falling out your chair because your tire warmers
are catching fire.
Relating the experience of a friend remarkably similar to present day me.
With tire warmers you either go all out or babysit them anytime they're plugged in.
But I'm with Rusty, I'd rather drop 2k on a set of axles , a triple clutch or a cage with harnesses. Of course if I had everything and 2k was burning a hole in my pocket.......I'd buy an STI 2011.

I've watched 1 motorcycle go up in flames from cheap tire warmers at Mid-Ohio years ago. The way this guys weekend was going. Everyone knew that something bad was going to happen to this guy sooner then later. Murphy had a hard on for this poor guy. Everything that could go wrong, did.

I really felt bad for this poor soul.

BGTV8 · 12-20-2019, 08:00 PM

Tyre-warmers are banned in motorsport competiton down under in anything apart from F1.

Too many pit-bay fires in the 60's and 70's

Besides, half the fun is your out-lap of half-warmed tyres .... old age and cunning usually beats youth and exuberance off the line and for the first half lap or so.

All the kids run Pirelli "Gran Am"/GT style slicks which take 2 laps top come on .... me - I run Dunlops which are pretty much ready to run hard after the formation lap to the grid. Mind you, don't ask a Dunlop to do much more than a 10-12 lap sprint .. but a Pirelli will run an hour stint (or maybe even a double-stint).

Spooler · 12-22-2019, 02:37 PM

Hmm, I have been looking at a catch can setup for a while. I should have already got one but I haven't made up my mind which one to get. It is between SOHO's and Rampage Fab. I have a pressurized coolant overflow tank. Why would you want to delete the PCV valves?

soill370z · 12-22-2019, 02:47 PM

Quote:

Originally Posted by Spooler

Hmm, I have been looking at a catch can setup for a while. I should have already got one but I haven't made up my mind which one to get. It is between SOHO's and Rampage Fab. I have a pressurized coolant overflow tank. Why would you want to delete the PCV valves?

i DRILLED OUT MY PCV VALVES AND VENTED BOTH ALONG WITH THE VALVE COVER BREATHERS TO A VENTED CAN. RUNS GREAT

Elmo370z · 12-22-2019, 03:56 PM

Quote:

Originally Posted by Spooler

Hmm, I have been looking at a catch can setup for a while. I should have already got one but I haven't made up my mind which one to get. It is between SOHO's and Rampage Fab. I have a pressurized coolant overflow tank. Why would you want to delete the PCV valves?

SOho set up is really nice. I don’t know if you looked at mine while my car was at your house

Spooler · 12-22-2019, 03:57 PM

Quote:

Originally Posted by Elmo370z

SOho set up is really nice. I don’t know if you looked at mine while my car was at your house

I didn't and I wish I would have.

Hotrodz · 12-22-2019, 04:09 PM

I have a Specialty Z catch can setup. It is also really nice!

Spooler · 12-22-2019, 04:18 PM

Quote:

Originally Posted by Hotrodz

I have a Specialty Z catch can setup. It is also really nice!

I was looking for that. Do you have a link for it.

redondoaveb · 12-22-2019, 04:20 PM

Quote:

Originally Posted by Elmo370z

SOho set up is really nice. I don’t know if you looked at mine while my car was at your house

Did you get the dipstick option to drain the oil back into the oil pan?

Hotrodz · 12-22-2019, 04:46 PM

Quote:

Originally Posted by Spooler

I was looking for that. Do you have a link for it.

I don't see it list on their web site so you may need to contact Seb or Johnathan.

redondoaveb · 12-22-2019, 05:02 PM

Quote:

Originally Posted by Hotrodz

I don't see it list on their web site so you may need to contact Seb or Johnathan.

Is it a modified version of the Z32?

Hotrodz · 12-22-2019, 06:23 PM

Quote:

Originally Posted by redondoaveb

Is it a modified version of the Z32?

Yep, that's it!

12-20-2019, 08:00 PM	#1925 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,503 Drives: 09 Nissan 370Z M6 Rep Power: 29907	Tyre-warmers are banned in motorsport competiton down under in anything apart from F1. Too many pit-bay fires in the 60's and 70's Besides, half the fun is your out-lap of half-warmed tyres .... old age and cunning usually beats youth and exuberance off the line and for the first half lap or so. All the kids run Pirelli "Gran Am"/GT style slicks which take 2 laps top come on .... me - I run Dunlops which are pretty much ready to run hard after the formation lap to the grid. Mind you, don't ask a Dunlop to do much more than a 10-12 lap sprint .. but a Pirelli will run an hour stint (or maybe even a double-stint). Rusty, Hotrodz, Ghostvette and 2 others like this. Last edited by BGTV8; 12-20-2019 at 08:04 PM.

12-22-2019, 04:09 PM	#1930 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	I have a Specialty Z catch can setup. It is also really nice! JARblue, Rusty and redondoaveb like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM

12-22-2019, 02:37 PM	#1926 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,504 Drives: 2013 Nismo 370z Rep Power: 2684391	Hmm, I have been looking at a catch can setup for a while. I should have already got one but I haven't made up my mind which one to get. It is between SOHO's and Rampage Fab. I have a pressurized coolant overflow tank. Why would you want to delete the PCV valves?