Fast Intentions Stage 2 TT build by MA-Motorsports.

cv129 · 09-20-2019, 12:12 PM

Quote:

Originally Posted by Spooler

My new front Facia/bumper came in yesterday at my Nissan dealership. They take good care of me on price. It was better than Z1's price and No shipping. Will need to pick it up next week. I am not in my truck today.

Are you also replacing that black bottom plastic lip piece? If so, oh man, this one little run-in sure cost a pretty penny between the paint and replacement parts.

Spooler · 09-20-2019, 12:21 PM

Quote:

Originally Posted by cv129

Are you also replacing that black bottom plastic lip piece? If so, oh man, this one little run-in sure cost a pretty penny between the paint and replacement parts.

Mine is fine. That is an expensive piece.

Rusty · 09-20-2019, 01:54 PM

Quote:

Originally Posted by cv129

Are you also replacing that black bottom plastic lip piece? If so, oh man, this one little run-in sure cost a pretty penny between the paint and replacement parts.

I've gone through 3 of the black plastic pieces.

Now I'll see how well the APR splitter holds up.

cv129 · 09-20-2019, 02:08 PM

Quote:

Originally Posted by Rusty

I've gone through 3 of the black plastic pieces.

Now I'll see how well the APR splitter holds up.

Ouch

Spooler · 09-20-2019, 03:02 PM

Quote:

Originally Posted by cv129

Ouch

LOL, He is old and hits all kind of chit....

Rusty · 09-20-2019, 03:48 PM

Quote:

Originally Posted by Spooler

LOL, He is old and hits all kind of chit....

Like curbs on the track.

Spooler · 09-21-2019, 08:05 PM

First oil change completed. Nothing out of the ordinary found.

Spooler · 09-21-2019, 11:48 PM

Rusty, I have been staring at your pictures in your gallery, posts #103 and #106. I think I have figured out a way to make my brake ductwork fit. I have to get my inner fender liners back on the car. My air filters are getting filled with sand. Nothing is making it past the filters, I just have to clean them weekly. I am not driving the car anymore until I get these damn things figured out.

Rusty · 09-21-2019, 11:52 PM

Quote:

Originally Posted by Spooler

Rusty, I have been staring at your pictures in your gallery, posts #103 and #106. I think I have figured out a way to make my brake ductwork fit. I have to get my inner fender liners back on the car. My air filters are getting filled with sand. Nothing is making it past the filters, I just have to clean them weekly. I am not driving the car anymore until I get these damn things figured out.

In my build thread. I see which pictures you are looking at. If you got the 2" Stillen kit. That hose is real flexible. You'll need about 5ft per side, maybe more.

Spooler · 09-22-2019, 12:20 AM

Quote:

Originally Posted by Rusty

In my build thread. I see which pictures you are looking at. If you got the 2" Stillen kit. That hose is real flexible. You'll need about 5ft per side, maybe more.

I got plenty of hose. No worries on that. I think I have just enough room to snake the hose between the intake piping and bottom CAC piping. I may have to notch out the fender liner some but that is no big deal. My tires/wheels are freaking wide and I hope they don't rub the cooling hose at full lock. If they do, Oh well. I gotta have my liners back in.

Rusty · 09-22-2019, 12:33 AM

Quote:

Originally Posted by Spooler

I got plenty of hose. No worries on that. I think I have just enough room to snake the hose between the intake piping and bottom CAC piping. I may have to notch out the fender liner some but that is no big deal. My tires/wheels are freaking wide and I hope they don't rub the cooling hose at full lock. If they do, Oh well. I gotta have my liners back in.

On my 3" hose. I had to oval it for tire clearance in one spot. That was above the sway bar.

Spooler · 09-22-2019, 04:41 PM

It got it done but boy is it tight with the stock bumper and Zspeed undertray.

Rusty · 09-22-2019, 05:23 PM

Quote:

Originally Posted by Spooler

It got it done but boy is it tight with the stock bumper and Zspeed undertray.

Did you cut the inner fenders?

Spooler · 09-22-2019, 06:39 PM

Quote:

Originally Posted by Rusty

Did you cut the inner fenders?

Yes, I had too. I also had to oval the hose so the tire wouldn't hit it. I barely
had enough room. Pictures are on Instagram.

Spooler · 09-22-2019, 06:45 PM

It's a classic 10lbs of crap in a 5lb bag. LOL Now I can have some fun in the rain and not worry so much about it.
The only problem is, we haven't had any rain in 2 weeks.

09-21-2019, 08:05 PM	#1777 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	First oil change completed. Nothing out of the ordinary found. Rusty, Hotrodz, Ghostvette and 4 others like this.

09-21-2019, 11:48 PM	#1778 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	Rusty, I have been staring at your pictures in your gallery, posts #103 and #106. I think I have figured out a way to make my brake ductwork fit. I have to get my inner fender liners back on the car. My air filters are getting filled with sand. Nothing is making it past the filters, I just have to clean them weekly. I am not driving the car anymore until I get these damn things figured out. Rusty, Hotrodz, Ghostvette and 4 others like this.

09-22-2019, 04:41 PM	#1782 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	It got it done but boy is it tight with the stock bumper and Zspeed undertray. Rusty, Hotrodz, Ghostvette and 4 others like this.

09-22-2019, 06:45 PM	#1785 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	It's a classic 10lbs of crap in a 5lb bag. LOL Now I can have some fun in the rain and not worry so much about it. The only problem is, we haven't had any rain in 2 weeks. Rusty, Hotrodz and redondoaveb like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM